USER MANUAL FCA WL/WS PASE System MY2021 Model:WXRFHM1
Model: WXRFHM1 The WXRFHM1 (Radio Frequency Hub Module) is an electronic body controller that provides Passive and Active entry and start to the vehicle. The module communicates with the other vehicle electronic devices via CAN FD. The communication of the RFHM module and the KeyFOB is done via LF antenna coils mounted inside and outside the vehicle (If equipped). The device is available in the 433.92 MHz internal antenna (92 mm) and 433.92 MHz external antenna (Fakra Connector) version.
Model: WXRFHM1 The FCA RFHM WL requires 2 different connectors to interface with the user and other modules
Model: WXRFHM1 Components on board Microprocessor Crystal Oscillator RF Receiver LF Transmitter CAN Transceiver LIN Transceiver Internal Clock 120MHz 40 MHz 433.92 MHz 125 kHz 2 Mbps 19.2 Kbps Technical data Operating Voltage Max Current Consumption Operating Temp range (°C) Measurements (LxWxH) weight (g) Carrier Frequency Bandwidth Number of Channels Type of Modulation Antenna Type Fakra connection 6V to 16V 250 mA -40 to 85°C 153.5X101.7X29mm 130.4g (internal antenna) / 134.7g (external antenna) 433.
Model: WXRFHM1 Regulatory information - FCC/ISED Owner Manual statement of compliance NOTE: If the device itself is smaller than 8 cm x 10 cm, the statements of compliance may be included in the device or vehicle owner/operator manual. However, if the device itself is larger than 8 cm x 10 cm, then it is required to have at least the first paragraphbelow placed on the device label or housing. This device complies with Part 15 of the FCC Rules and with Industry Canada’s licence-exempt RSSs.