User's Manual

ManualsBrandsContinental Conair ManualsElectronicsFRS+GMRS

Table Of Contents

UHF FM TRANSCEIVER (Family Radio Service)

FRS310HT IB-4833 Printed in China

IMPORTANT SERVICE INFORMATION

SAVE THESE INSTRUCTIONS

BLISTER PACK CONTENTS

Read this manual before attempting to set up or use this instrument.

It contains important information regarding safe installation and use.

Keep this manual for future reference. Also save the carton, packing

and proof of purchase to simplify and accelerate any needed action.

FRS316-Two (2) Two-Way Radios

* Attached to the units at the time of packing

User-Removable Belt Clips*

Two (2) Rechargeable Battery Packs

FRS Charger with AC/DC Adaptor

User's Manual

FCC NOTICE

FRS PRODUCT DESCRIPTION

The FCC requires that you be advised of certain requirements involving the use of

this device. This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in

residential installation. This device uses and can generate radio frequency energy.

If not installed and used in accordance with the instructions, it may cause harmful

interference to radio communications. However, there is no guarantee that the

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception (which can be determined by

turning the unit off and on), the user is encouraged to correct the interference by

one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC WARNING: This equipment generates or uses radio frequency energy.

Adjustment to this unit or replacement of any transmitter component (crystal,

semiconductor, etc.) to this unit that could result in violation of the rules.

FCC INFORMATION: This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:(1) This device may not cause

harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. Privacy of communications

SAFETY INFORMATION: Your wireless hand-held portable transceiver

contains a low power transmitter. When the PUSH TO TALK (PTT) button is pushed it

sends out radio frequency (RF) signals. The device is authorized to operate at a duty

factor not to exceed 50%. In August 1996, the Federal Communications Commissions

(FCC) adopted RF exposure guidelines with safety levels for hand-held wireless

devices.

may not be ensured when using this equipment.

CAUTION: To maintain compliance with the FCC's RF exposure guidelines hold

the transmitter and ANTENNA at least 1 inch (2.5 cm) from your face and speak

in a normal voice, with the ANTENNA pointed up and away from the face. If you

wear the handset on your body while using the headset accessory, use only the

supplied belt clip for this product and when transmitting, take it out of the belt to

ensure that the ANTENNA is at least 1 inch (2.5 cm) from your body.

Use only the supplied ANTENNA. Unauthorized antennas, modifications, or

attachments could damage the transmitter and may violate FCC regulations.

NOTE: The maximum transmission range will vary depending on terrain and

environment. Range will be greater in open fields, while the range is shorter within

and around buildings or large structures.

FRS316

FRS1 FRS 2

BATT 1 BATT 2

The FRS316 is compatible with other brands utilizing the same frequency

band (operating in the frequency range from 462.5625MHz to 462.7250MHz).

Please read this user's manual thoroughly to get the most out of your FRS316

two-way radio.

The FRS316 is a 22-channel UHF two-way radio, featuring a multi-functional

LCD panel (which indicates the current channel and various radio status icons).

Other features also include electronic volume control and battery save circuitry.

The FRS/GMRS is the newest generation in personal two-way communications.

The FRS/GMRS operates in a licensed radio band (FCC license is needed for its

operation), on any of the GMRS channels.

The FRS316 is a lightweight, compact two-way radio that can be used up to

about two miles with family or friends at parks, shopping malls, sporting events,

concerts--any indoor or outdoor activity!

MIC

FCC Licensing Information Insert

Summary of content (5 pages)

PAGE 1
IMPORTANT SERVICE INFORMATION by FRS316 UHF FM TRANSCEIVER (Family Radio Service) Read this manual before attempting to set up or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed action.
PAGE 2
SAFETY INSTRUCTIONS FOR BATTERIES CAUTION: To reduce the risk of fire or personal injury, read and follow these instructions.: CONTAINS NICKEL-CADMIUM BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. CONTROLS DIAGRAM ANTENNA EAR/MIC JACK BELT CLIP (Located on the rear side) TX LED LCD UP / DOWN PTT (Push To Talk) MON(MONITOR) CALL CA LL 1. Use only a CONAIR approved battery pack in FRS316. a. GP35AAAK4BX 4.8V 350mA GPI International Ltd. or b. JB35AAANC4BC 4.8V 350mA JB Energy (HK) Ltd. 2.
PAGE 3
Battery Charging Battery Installation The battery pack in the unit must be fully charged for 10-14 hours before use. 1. Insert the small plug on the end of the AC adaptor into the POWER-IN CONNECTION Jack at the back of the desktop charger and plug the AC adaptor directly into a standard 120V wall outlet.
PAGE 4
OPERATION Changing Channels The unit has 22 available channels. To change channels: 1. Press the FUNCTION button the channel number digit flashes on the LCD panel. 2. While the channel number is flashing: Press the UP ( ) button to move to a higher channel. Press the DOWN ( ) button to move to a lower channel. The channel changes from 1 to 22, or from 22 to 1. 3. Press the FUNCTION button or PTT button to select the desired channel and return to normal mode.
PAGE 5
TROUBLESHOOTING SYMPTOM No power. Reception is weak. SERVICE SOLUTION Check batteries. Ensure that the batteries are installed properly. alkaline batteries. FOR IN-WARRANTY SERVICE Press the UP ( Package your units (include all accessories) and ship the unit postage prepaid* and insured (for your protection) to: ) button to increase VOLUME. The receiving signal may be weak and/or out of range. If this happens, press the MONITOR button. Cannot change channels.