Release the Headset Release the Headset cord from the base. assess Receiver Volume Control Set switch (left side of handset) to Norm, Mid or High. DCS 200mA Ss) 7 rom oF Antennas Adjust base antenna to upright position. Set Tone/Pulse Switch Set switch (back of base) to correct dialing mode TONE or PULSE. DIV 2 oeq nan rr over mm yw use omy wr CLASS 2 POWER SOURCE. Please check with local phone company if uncertain of type of service. ger On/Off Set switch (back of base) to ON or OFF.
ON CAUTION . Never install a telephone during a lightning storm. . Never install a telephone in a wet location . Never touch insulated telephone wires or terminals. . Use caution when installing a telephone line. rwN Modular Jack Telephone Line Cord Standard Outlet AC Adapter Base Antenna AC Adapter Jack Tone/Pulse Switch Ringer On/Off Switch 120 Volt Outlet / Telephone Jack 1. This phone requires a modular phone jack (RJ11} and a standard 120 volt outlet. 2. Plug phone directly into outlet. 3.
TROUBLESHOOTING. 1 you experience difficulty operating your cordless phone, try the suggestions below. If the trouble persists, call the Southwestern Bell Freedom Phone® Retail Sales Toll Free Help Line at 1-800-356-0937, Monday Friday 8:30a.m p.m. EST Saturday 8:30am. EST The unit will not operate /no dial tone: eo Make sure TALK BUTTON is lit. o Make sure AC adapter is plugged into base unit and wall outlet. e Make sure telephone line cord is plugged into wall jack.
1 TT Pause A 4-second PAUSE may be inserted into the speed dialing of telephone numbers. Press REDIAL button at required point during storage of a number in memory. Page / Handset Locator Send a signal from the base to handset. Press PAGE button on base and a series of rings will sound from handset. To locate the handset (i it is away from the base), press and hold the PAGE button for about 5 seconds. A series of rings will sound for approximately 60 seconds.
chess esscccsccnse Reorient or relocate the receiving antenna. + Increase the separation between the equipment and receiver. + Connect the equipment into an outset on a circuit different from that to which the receiver is connected. + Consult the dealer or an experienced radio TV technician for help. less ssscevssessscscenes WARRANTY, EXPRESSED OR IMPLIED, WHATSOEVER. This warranty ‘gives you specific legal rights, and you may also have other rights which vary from state to state.
FCC WANTS YOU TO This equipment compiles with Part 68 of the FCC rules. On the bottom of the base of this equipment is a label that contains, among other information, the FCC Registration Nuremberg, Ringer Equivalence Number (REN) and the Universal Service Order Case (USO, which is RI-11C, for this equipment. You must, pan request, provide this information to your telephone company.
ancestresses IMPORTANT SAFETY INSTRUCTIONS. BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow ail warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Oo not use liquid cleaners or aerosol cleaners. Use damp cloth for cleaning. 4.