@ & (| Southwestern Bell Freedom Phone® 78% A7 8 900MHz Dual Keypad Cordless with Speakerphone FF920 Owner's Manual Toll-Free Help Line 1-800-338-0937 80.129, 10:54 Al Adobe Patagonia 6.
— | e—T IMPORTANT SAFETY INSTRUCTIONS /occcocevverrsnnsrrnes 3 THE FCC WANTS YOU TO KNOW 4 SAFETY INSTRUCTIONS FOR BATTERIES ...vovsovcnveees 5 INTRODUCTION ss 6 CONTROLS AND INDICATORS w..vccvmmnnirrcssrrisnnsssns 7 BOX CONTENTS 9 MAINTENANCE corer abhorrence chess 9 INSTALLATION sens 10 CHARGING THE HANDSET 13 SETTING THE SELECTORS 15 ADJUSTING THE VOLUME CONTROLS .
IMPORTANT SAFETY INSTRUCTIONS § When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock, and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a dry cloth for cleaning.
| — THE FCC WANTS YOU TO KNO' This equipment complies with Part 68 of the FCC rules. On the bottom of the base of this equipment is a label that contains, among other information, the FGC Registration Number, Ringer Equivalence number (REN) and the Universal Service Order Code (USO, which is RJ-11C, for this equipment. You must, upon request, provide this information to your telephone company.
| | CAUTION To reduce the risk of fire or personal injury, read and follow these instructions. , Use only a Southwestern Bell Freedom Phone® approved battery pack in the handset of your cordless telephone. FOR HANDSET UNIT: 3N-600AAL 3.5V 600mAh SONYA Electric Go., Ltd or GPEOAASIBMX 3.8V B00mAR GP1 INTERNATIONAL LIMITED. CONTAINS NICKEL-CADMIUM BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. 2 Do not dispose of the battery in a fire, as it may explode.
NLS) About the FF920 This is a 40-channel analog 900MHz cordless telephone with a dual keypad and / speakerphone. Iris designed and engineered to exacting standards for reliability, long fife, and J outstanding performance. Features + Hand sire talk on the base unit (speakerphone). ~ + Conference call capability between line, base unit and handset. Vv + 40-Channel Autocross and manual selection. » Intercom between base and handset. + Speaker volume control. «20 memory dial. + Electronic hold.
CONTROLS AND INDICATORS LTS Handset Controls Bh RA RECEIVER VOLUME control + RINGER ON/OFF switch DIALING buttons / MUTE button / TALK button (with LED indicator) 7 MEMORY button / CHANNEL button REDIAL/PAUSE button INTERCOM button 10 FLASH button + Wm NRW
TELETYPEWRITER RINGER ON/OFF switch PULSE/TONE switch =’ TELEPHONE LINE jack av DC power jack + CHARGE LED PAGE/INTERCOM button FLASH button MUTE button + INTERCOM LED J J 22 VOLUME control buttons J 24 DIALING buttons ¥ 25 MEMORY button + 26 REDIAL/PAUSE button 27 SPEAKERPHONE LED + 28 SPEAKERPHONE button +
installed in the handset FFo20 Basho unit / FF920 Handset | Rechargeable Battery Pack, = FF920 Base Unit » FFO20 Handset » Rechargeable Battery Pack {Installed in the handset} * Owner's Manual * Memory Labels * AC Adapter «Line Cords (6 feet: 1, 6 inch « Quick Installation Guide .. » Registration Card ao om tam SALON NS SN Keep the shipping carton and packaging material in case you need to transport your phone, if any of these rems are missing of damaged, contact your place of / purchase.
— {0 Selecting the Installation Location Do not place the FF920 where thees iss excessive heat or humidity (as in a kitchen at bathroom), Your FF920 can be placed on a desk or tabletop near a standard 120V AC outlet and telephone fine jack or mounted on a standard AT&T or GTE 7 wall plate. Keep the unit away from heating appliances and devices that generate / electrical noise (motors, fluorescent lighting, lee) CAUTION + Never install a telephone during a lightning storm.
Gh Wh ~ 874 Desk or Tabletop Installation Plug the AC adapter cord into the $V DC power jack on the / base unit. Plug one end of the long telephone cord into the TELEPHONE 7 LINE frack on the base unit. Plug the other end of the telephone cord into the telephone / wall jack. Raise the antenna on the base unit to the upright position. Plug the AC adapter Into a standard 120V AC wall outlet. Use only the AC adapter supplied with the FF920.
Mounting on a Standard Wall Plate Badinage The FF can be mounted on a standard wall plate. © 1 one is not available, it can also be mounted on two screws (not included), installed 3 1/4" vertically apart in the wall. Leave 3/16” of sate screw exposed for / mounting the unit, See page 31 for template. 1 Plug the AC adapter cord into the 9V power jack on the base / unit. Thread the cord through the guides. Insert one end of the short telephone cord into the , TELEPHONE LINE jack on the base unit. wall jack.
The battery pack in the handset must be fully charged for 10 hours before first using the telephone. To charge the handset, leave the handset unused in the cradle for 10 hours, For Optimum Battery Performance: / + Do not let the battery become fully discharged. 4 « Be sure to rectum the handset to the base at night. / Low Battery Indicator Once the battery charge becomes low, the TALK button will flash, and the unit will beep for’ § minutes.
— 4 Cleaning the Charge Contacts To maintain a good charge, it is important to clean all charge contacts on the handset and base unit about once a month. ~ Use a pencil eraser of other contact cleaner. Do not use any liquids or solvents.
RINGER ON/OFF switch The FF920 allows you to switch the ringer ON or OFF. Slide the RINGER ON/OFF switch on the side of the handset and base unit to the desired setting, J ‘PULSE/TONE switch ‘The FF920 wiki operate on touch tone of rotary {pulse} systems. Set the switch to Tone for touch tone service or Guise for purse dialing {rotary service). If you are not certain of the type of dialing service you have, set the switch to Tone. ~~ On the handset, press the TALK button and then any digit.
| — ADJUSTING THE VOLUME CONTROL VOLUME control iS Handset This unit allows you to adjust the handset volume ta a more comfortable listening level. Simply slide the VOLUME contra on the side of tha handset to either the NORM, MID{s) or HIGH position. VOLUME control Base unit Use the up/down VOLUME control on the base unit to set the speaker volume 1 the desired sound level. « The volume level can be selected for 8 levels.
From the Handset 1 Lift the handset and press the TALK button to obtain a / Rx) dial tone. « The TALK button LED indicator will it» 1# the TALK Hutton is pressed when the handset is out of range, an error tone is sounded. If this happens, move the handset closer to the base and try again. 7 ges rx Dial the desired phone number. 2 3 To end the call: Press the TALK button on the handset. / of Place the handset back onto the cradle. / «The TALK button LED indicator will go oft.
FLASH button “The FLASH button functions in the same way that the hook switch does < on a corded phone, Tha FLASH button is used to access special telephone services like call waiting. / For further details on subscriber services (such as call waiting), please contact your telephone company. » You may access some features of a PBX (Large business phone system) using the FLASH button. In this sacs, lollop the 7 procedure for hook switch operation which is required by the PRX. + Flash time is 0.7 second. .
3 Pause You can insert a 4-second PAUSE into the speed dialing of long distance numbers by pressing the REDIAL/PAUSE button on the handset of base unit. tis also useful when the phone is connected to a PBX system and an access digit (usually 8) is required in order to make an outside phone call. When you program a telephone number in speed dialing memory, press the required number (usually 9) to access the outside line.
| — VE SNC RA Set the RINGER ON/OFF switches on the side of the handset and the rear of the base to ON. If these switches are set to OFF, the units will not ring. The SPEAKERPHONE and TALK LED will flash to let you know there is an incoming call. When the Handset is in the Base Cradle © When the telephone rings, lift the handset. / + The TALK button will light, and the call will be automatically connected.
SPEED DIALING The FF920 is equipped with 20 speed dialing memories for programming your most frequently J dials telephone numbers. You can store up to 16 digits in each of the memory locations 01 through 20. a) Key Storing a Phone Number into Memory fa) q Press the MEMORY bunion. £1 7 he Bose + The store mode is sel. 2 ‘Enter the telephone number that you wish to store. more than 16 digits are pressed, three error beeps will sound, J and the phone number will not be stored. J Press the MEMORY button again.
Dialing a Stored Phone Number from Memory 1 Lift the handset and press the TALK button to obtain a dial / tone, 2 Press the MEMO (memory) button. / eo, + The memory dial mode is canceled if no operation is performed [sw] for 30 seconds. ~~ Press the memory location {O1 to 20) where the phone number @o B® 3 you wish to dial is stored. + The stored number will be dialed automatically. / 4 When the conversation is completed, place the handset in the base cradle. OR Press the TALK button to hang up.
From the Handset 1 Press the INTERCOM button. «Three beeps will sound from the base unit. / 5 « The unit is now in INTERCOM mode. / + it the base unit is in the talk mode, the intercom mode cannot be / used. 2 You may now begin speaking with the user of the base unit. / 3 “To end this fiction, place the handset Ind the base cradle, press the INTERCOM button on the handset, or press the / PAGEANTRY button on the base. From the Base {Press the PAGEANTRY button.
/ With the FE920 it is possible to hold a three-way conference call between the caller, the base unit and the handset. and J oo ‘fo join a call already In progress on the base, pick up the ; 1 handset (it-it Is in the base cradle) or press the TALK button. + * You can now begin speaking with the caller and the base user. From the Handset ott “rr When the call is over: CER) + Press the TALK button of return the handset to the bass to end the call. The base unit is now set to the talk mode..
| Ry SIs You can transfer a call from the base to the handset or from the handset to the base. v From the Base to the Handset The call should already be in progress through the base speakerphone, / It the handset is In the base cradle: 1 Pick up the handset, and begin speaking through the / handset. ~ t the handset is away from the base cradle: Press the INTERCOMMUNICATE button.
Temporary Touch Tone Dialing if you only have pulse dial service, this feature lets you send the tones needed to operate answering machines, or use electronic banking services, charge cards, and other special services. J 1 Dial the desired phone number. J 2 Turn on temporary touch tone dialing by pressing the J button on the handset or base unit. V 3 You can then press the numbers or symbols you need to send J using touch tone dialing.
TROUBLESHOOTING If you experience difficulty operating your cordless phone, try the suggestions below. If the trouble persists, call the Southwestern Bell Freedom Phone® Consumer Hotlink, toll-free, at 1-800-366-0937, 8:30 www.swireedomphone. com. , < ike [3 cellphones Conn a.m. 4:30 p.m. EST, or visit our website at “hitch/ Da not attempt to service this unit yourself.
I 03 PRODUCT CARE A. Avoid outing cordless panes near heating appliances and devices that generate electrical v noise (motors, fluorescent lamps, etc). B. Avoid rough treatment of the phone by placing the handset gently into the base when J hanging up. Avoid dropping the handset. C. Clean your cordless telephone only with a soft cloth slightly dampened with water or mild J hand soap. Do not use any type of solvent or abrasive cleaner. D. Your cordless phone is not designed to be water resistant.
According to FCC regulations, this equipment, which has been certified and registered with the FCC, may only be repaired by authorized persons. If repairs or adjustments are made by an unauthorized person, the FCC certification may be voided. Should you encounter any problems, please call the Southwestern Bell Freedom Phone? {oil-free Customer Help Line for assistance: | -800-366-0937, Monday Friday between the hours of 8:30 am 4:30 pm, {EST}, or visit cur website at “hitpwww.swhireedomphone.
LIMITED WAR This Southwestern Bell Freedom Phone® is warranted to the original purchaser 10 be free from defects in materials and workmanship under normal installation, use, and service for a period of one (1) year from the date of purchase shown on the purchaser's receipt.
WALL MOUNTING TEMPLATE + Place this template on the wall. 3 The location of the screws is indicated by the centers of the crossed lines. Fasten the screws leaving 3/16" of the screw extending from the wall.
37 STOP — don't take unit back to the store. LOOK — for the toll-free "help® telephone number LISTEN — as our experts talk you through the problem For immediate answers to your questions regarding operation, missing parts or installation, call the Southwestern Bell Freedom Phone® retailer Sales Help Line: 1-800-366-0937 8:30 a.m. — 4:30 p.m. EST, Monday through Friday swhireedomphoene.