IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 8. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use good cleaners or aerosol cleaners, Use damp cloth for cleaning. 4.
FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FGG rules. On the bottom of the base of this equipment is a label halt contains, among other information, the FOC Legislation Number, Singes Equivalence cumber (REN) and the Universal Service Order Code (USO, which is RJ-11C, for this equipment. You must, upon request, provide this information to your metaphor company.
Ig Measures: “int or relocate the receiving na. ase the separation between the men and receiver. ect the equipment into an outlet resit different from that to which receiver is connected. uit the dealer or an experienced TV technician for help. BES FOR BREACH OF THIS OR OTHER WARRANTY, MESSED OR IMPLIED, SOEVER. arrant gives you specific legal and you may also have other rights vary from state to state.
1 : INSTALLATION /\ caution 1. Never install a telephone during a lightning storm. 2. Never install a telephone in a wet location. 3. Never touch insulated telephone wires or terminals 4. Use caution when installing a telephone line. Modular Jack Handset Guide Standard Outlet AC Adapter ial Mode Switch (Tone/Pulse} 120 Volt Quiet/ Wall Mount Installation Telephone Jack Base unit may be mounted on a standard | . wall plate. Drone 1. insert AC adapter nto back of base unit. outlet, 5 2.
INSTALLATION Antennas Adjust base antenna to upright position. Set Tone/Pulse Switch Set switch (back of base) to correct dialing mode TONE or PULSE. a © tire worm USE ONLY WITH CLASS 2 POWER SOURCE Please check with local phone company if uncertain of type of service. Ringer On/Off Set switch (left side of handset) to ON or OFF. Ringer switch must be ON for handset 16 ring during incoming calls. Receiver Volume Central Set switch {left side of handset) to Norm, Mid or High.
TROUBLESHOOTING It you experience difficulty operating your cordless phone, try the suggestions below. {f the trouble persists, call the Southwest em Bell Freedom Phone® Retail Sales Toll Free Help Line at 1-800-366-0937, Monday Friday between the hours of 8:30 p.m. (EST) The unit will not operate/ no dial tone: * Make sure TALK BUTTON is Jit + Make sure AC adapter is plugged into base unit and wall outlet. «Make sure telephone line cord is plugged into wall jack.
Pause A d-second PAUSE may be inserted into the speed dialing of telephone numbers. Press PAUSE button at required point during storage of a number in memory. Page / Handset Locator ~ Send a signal from the base to handset. Press PAGE button on base and a series of rings will sound from handset. To locate the handset {it if is away from the base), press and hold PAGE button, press any key on keypad (including TALK} to cancel the page.