INTERTWINE TESTING SERVICES 9.0 Instruction Manual Attached is a preliminary copy of the Instruction Manual. Please note that the required FCC Information to the User can be found on this manual. This manual will be provided to the end-user with each unit sold/leased in the United States. FCC ID: 1.
Cordless TAD FF680 Operation Manual MAIN FEATURES TAD FEATURES Digital OGM & ICM Approx. 15 minutes of recording (1 PCs. 4Mx4 ARM) Remote turn on 10 rings Max. OGM length : 30 seconds Max. ICM length 60 seconds Max.
Cordless TAD FF680 Operation Manual 19.4 Time check, set-up 19.5 Answer mode ON, OFF F Auto Standby allows the user to hang up by simply returning the handset to the base. ato Answer [allows the user to answer a cal sic time pushing buttons. The just removing the handset from the base so the user don’t have to key will be disable for § seconds to avoid accidental hang up.
Cordless TAD FF680 Operation Manual POWER ON SELF TEST At power up, the machine will execute a Power-On-Self Test automatically to make sure the recording media is in good condition. VOICE PROMPT Wait for operation. Unit ready. EVENT When power-up, before the unit perform check RAM function. (key operation is enabled after RAM check completed in about 14 seconds) After RAM check is complete During the test. the 7-segment display will count down from /9/ to [8].
Cordless TAD FF680 Operation Manual EVENT VOICE PROMPT (8) % enter security code at end of greeting. <4 enter each digit for 3 seconds. Press 1 to continue or 2 to stop. 10 {Press “2° button button at (9). Arc you having trouble receiving messages 7 Press 1 for yes or 2 for no. 11/Press ‘17 button at (10) is answer on/announce only switch set to answer machine turned on. 4 if power failure occurs, reset machine. < if message capacity is full, eras messages. Press | to continue or 2 to stop.
Cordless TAD FFB80 Operation Manual [EVENT VOICE PROMPT “inform that setting to announce only. Announce only Switching from ‘amorally’ 10 ‘Normal’ position. [Answer On ANSWER OFF MODE Press ‘ON/OFF button in Answer On Mode will turn-off the unit and enter into the Answer off Mode. The 7-segment Messages counter display will be turned OFF.
Cordless TAD FFB80 Operation Manual [EVENT VOICE PROMPT again within 5 sec. greeting button until you are finished recording. User recorded less than 2 [Greeting not recorded, record longer message. seconds OGM The first time press and hold the GREETING button, the 3" voice prompt will be announced. (the 1% and 2" voice prompt will be skipped) For changing the existing OGM, the unit must be in Answer On Mode.
Cordless TAD FFE80 Operation Manual During message recording, pressing ‘S7TOP/SAVE” button ar pick up a parallel phone of the same line will terminate ICM recording immediately. And the current ICM will be saved The maximum recording time is 60 seconds per message. The message recording will stop when receiving 7 seconds of: No sound Continuous Tone (e.g.
Cordless TAD FFB80 Operation Manual EVENT VOICE PROMPT release play-button. reds and release the bunion again within § sec. ( No message to play) No messages press and release the button again within 5 sec.{ c.g. there are 3 messages to play) 3 messages, message 1, Monday 12:00am before starting to play each message, message number will message 8) message 8, Monday 12:00am At the end of last message, ail the messages will be temporary erased *. No more messages. Press stop/save button to save messages.
Cordless TAD FF680 _Operation Manual The playback sequence can be interrupted by pressing the ‘STOP/SAVE’ button. All messages will be saved and new recording will start from the end of the last message If the unit has played back all messages, the message count display will return to f0f and all messages will be erased temporarily. All temporary erased messages will be permanently erased if: a. ICM recording in process, or b. An OGM is recorded, or ¢. A memo message is recorded.
Cordless TAD FF680 Operation Manual [EVENT VOICE PROMPT at the end of message playback No more messages start recording greeting. After end Record greeting after the beep, press recording unit plays back greeting.
Cordless TAD FF680 Operation Manual No sound Continuous Tenn Dial Tone) = Busy Tone or 30 seconds time out Press [5] to end the recording. The unit will play back the recorded OGM once via the telephone line after recording. Then go back to [common start up sequence]. All ICBMs and Call Count are reset. If OGM recording is terminated by pressing 'GRAVESTONE’ button or pick up a parallel phone connected to the unit, the unit will return to Answer On Mode immediately, the recorded OGM will be saved.
Cordless TAD FF880 Operation Manual SETTING OF THE DAY/TIME STAMP Press ‘time set’ button to check of set time EVENT VOICE PROMPT press and release button, clock is set (voice prompt is an e.g.) Monday onc O'one AM, to set clock, press and hold time set button press and release button, clock is not set To set clock, press and hold time set button Press and hold the button for 1.5 sec. will begin the set clock sequence. Day will be set first Press on/off bunion to set day.
Cordless TAD FF6B0 Operation Manual [EVENT VOICE PROMPT no message to play No messages start playing message (c.g. © messages |6 messages. While listening to message available) press 6 to skip, or 4 to repeal. Press § io stop & save all messages at the end of message playback No more messages slat recording greeting. After end Record greeting after the beep, press recording unit plays back greeting. 5 to end recording turn on machine and read set time Answer on. Monday one O° one AM.
Cordials TAD FF880 Operation Manual CORDLESS OPERATION Channel frequencies [Transmission frequencies in MHz CH.NO Base Handset 1 43.720 48.760 43.740 48.840 3 43.820 48.860 4 43.840 48,320 5 43.920 49.020 6 43.960 49.080 7 44.120 49.100 8 44.160 49.160 9 44,180 49.200 10 44.200 49.240 1 44.320 49.280 12 44.360, 49.360 13 44.400 49.400 14 44.460 49.460 15 44.480 49.500 16 46.610 49.670 17 46.630 49.843 18 46.670 49.860 19 46.710 49.770 20 46.730 49.873 21 46.770 49.830 22 46.830 49.890 23 46.870 49.
Cordless TAD FF680 Operation Manual The scanning sequence is starts from CHI inwards and follows the sequence in the frequency table Digital security code ‘The security code is composed of 16 bits data, so it can generate 65536 combinations.
Cordless TAD FF680 Operation Manual If the communication Link cannot establish with 6.5 sec, there error beeps tone will be heard from the handset to indicate the communication is failed with in use LED turns OFF. Terminate a call Ta terminate a call ,either by pressing the “talk” key or replace the handset on the cradle of the base unit. By pressing the ‘talk’ key, the handset LED will turns OFF with a beep indicating call is terminated successfully.
Cordless TAD FF680 Operation Manual Chain dialing is allowed in Two memory location Dial key pad Press “talk” key during standby mode to establish RF communication. Press the dial key once and the digits will be dial out (DTMF)to fine for the minimum of 100msec. Press & hold the dial key for continue MDT tone output. In pulse dialing mode, press to switch to tone dialing, a 4 seconds pause will be inserted.
Cortes TAD FEB Operation Manual Battery/Voltage low detection Battery detection will perform all the time except during charge mode. ie when handset place on the cradle of the base unit. IF battery low condition is detected (3.3V) , then the handset will enter into battery low condition. the buzzer will beep for 7 sec interval i.e. 400msec ON, 6.6sec OFF (tone frequency is 1 kHz) and the IN USE Led will flash. The handset will change to ‘Halt’ mode when 3.0V is detected.
Cordless TAD FF680 Operation Manual Manual Change / Release information: RELEASE NO.: RI |RELEASE DATE: TOMBAUGH? [REVISION NO: 1.0 [SOFTWARE RELEASE NO: NA RELEASED TO : Kirkpatrick, Eric I, Kelvin T. [MUCILAGE NOTE : 1ST RELEASE RELEASE NO.+ RZ |RELEASE DATE: 14AUG.97 REVISION; 11 [SOFTWARE RELEASE NO: NA Kirkpatrick) on 29 RELEASED TO : Eric L., Kelvin T,, Steve Aug 97 W.
Cordless TAD FF680 Operation Manual SN AEN “« < v The day / time being set will play back once. { pause a second after the setting ) (page 13) Press the key in handset or put the handset to cradle will terminate the remote operation. Press the TALK key will terminate the remote operation and enter into “TALK” mode.
Cordless TAD FF880 Operation Manual v Flash the °F’ to indicate new message received (page 11, 20) + Flash the ‘A’ to indicate now message received (page 4. 20) v announce ‘press and hold time set button’ (page 5) v End of R6 change FFG80_OP / Revision 1.6706 Nov.
INTERTWINE TESTING SERVICES 10.0 Security code information The telephone has an internal security code with 63,536 possible combinations.