IMPORTANT SAFETY INSTRUCTIONS BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall telephone jack and power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use damp citric for cleaning. .
FCC WANTS YOU TO KNOW This equipment complies with Part 68 of the FCC rules. On the bottom of the base of this equipment is a label that contains, among other information, the FCC Registration Number, Ringer Equivalence number (REN} and the Universal Service Order Code (USO, which is RI11C, for this equipment, You must, upon request, provide this information to your telephone company.
LIMITED WARRANT warranties, obligations, or liabilities. ANY I'M P LIED WARRANTIES, OBLIGATIONS OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES, OF MERCHANT ABILITY AND FITNESS FOR A ARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE ONE-YEAR DURATION OF THIS WRITTEN LIMITED WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Page / Handset Locator Send a signal from the base to handset, Press PAGE button on base and a series of rings will sound from handset. To locate the handset (It is away from the base) , press the PAGE button, the in supercharge LED will light for about 5 second indicating the page message is sent, A series of rings will sound for approximately 80 seconds, Return the handset to the base or press any button to cancel the page.
TROUBLESHOOTING . «+ +e levee eee IEEE antennae if you experience difficulty operating your cordless phone, try the suggestions below. if the trouble persists, call the Southwestern Bell Freedom Phone Retail Sales Toll Free Help Line of 1-800-366-0937, Monday Friday 8:30am~ 9:00pm EST, Saturday 8:30am 12:30pm EST. hitch £5 om phone The unit will not operate/ no d “tone: « Make sure TALK BUTTON LED ist. + Make sure AC adapter is plugged anti base unit and wall outlet.
INSTALLATION / \ CAUTION _ Never install a telephone during a lightning storm. 3 Never install a telephone in a wet location. 3, Never touch insulated telephone wires or terminals. 1. Use caution when installing a telephone line. Modular Jack Telephone Line Cord AC Adapter Jack 120 Volt Outlet /Telephone Jack 1. This phone requires a modular phone jack (R11) and a standard 120voit. outlet. 2. Plug phone directly into outlet. 3.
INSTALLATION . Antennas Adjust base antenna to upright position, Set Tone/Pulse Switch Set switch (back of base} to correct dialing mode TONE or PULSE, Please check with local pane company if uncertain of type of service. Ringer On/Off Bet switch (back of base) to ON or OFF. Finger switch must be ON for handset to Uncompromising calls Base Ante Receiver Volume Control Set switch (Left side of handset) to NORM Mid or HIGH.