pot Si EM ENS Automotive Systems AT SE 8C1 CACAO Operating Manual/Functional Description for Siemens Child seat Presence and Orientation Detection/ Passenger Presence Detection (CHIROPODY) FCC ID: KR55WK4291 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PLOD Technical Description I. Technical description CPD The Child Seat Presence and Occupant Detection (CPD) is a transponder principle based sensing device that provides information on the passenger and child seat presence in order to adapt the airbag deployment in regard to the occupant situation.
V. Process To detect an infant seat, a carrier field in the 130kHz band is transmitted via the transmitting antenna. The respective receiving antennae on the left and right side of the passenger seat are scanned sequentially for the response of the resonators in the child seat, by variation of the carrier frequency the optimum response of each resonator is determined.
sh #R4281 Vil. Mechanical Either Action Pins ™ or soldered pins are used for both the connection between interface electronics and the conductors of the PPD sensor mat as well as for the connection between interface electronics and transmitting/receiving antennae.