User's Manual

1/6
User Manual Statements RKE232E1
Date: Nov. 19
th
, 2020
Technical information
Model: RKE232E1
Frequency Band: Channel 1: 433.47 MHz
Channel 2: 434.37 MHz
Channel 3: 433.92 MHz
Output Power: < 10 dBm
Manufacturer: Continental Advanced Antenna GmbH
Address: Römerring 1, 31137 Hildesheim, Germany
Phone: [phone]
Safety and Recommendations
Each device is individually tested and factory set.
WARNING: The Module is designed for in-car use only. It MUST be well integrated into the
automotive environment (Tambient min. -40 °C to max. +105 °C) and needs to be
installed by the OEM (car-manufacturer) or in case of replacement by a professional
garage.
WARNING: The product is maintenance-free and needs no adjustment of the end user.
You must not remove the device from the car nor use it as intended. Any modification
of the device will cause the cease of the device`s operating license.
WARNING: The fuse used in the vehicle for electrical protection of the control unit
must comply with MBN 10430 (2011-11) and an amperage of 7,5 amperes!
WARNING: The insolation of the used conductors with a cross-sectional area of 0,5 mm
2
or greater must comply with IEC 60332-1-2 and IEC 60332-1-3.
The insolation of the used conductors with a cross-sectional area of less
than 0,5 mm
2
, must comply with IEC 60332-2-2.
Changes or modifications not expressly approved by Continental Advanced Antenna GmbH could void the
authority to operate this equipment.
Interior