Technical Specs

Adaptor Transmitter TL-4015A

Description:

TL-4015A adaptor transmitter is an accessory to the TL-4015 that can send the

messages of TL-4015 to the TL-4016P.

Installation:

- Turn off the power of the TL-4015 before installation;

- Insert the 3.5mm plug of the device into the BPTX interface of the TL-4015;

- Pass the supplied M3 screw through the mounting hole, tighten the screw and fix it

on the TL-4015;

- After the installation is complete, you can turn on the TL-4015 power supply.

Operation:

When the TL-4015 is alerting, it will trigger the TL-4015A to send the alarm content

periodically. When sending, the LED will flash and the TL-4016P will receive the alarm

message.

Technical Specifications

Input Voltage: 12VDC

Maximum Rating: 30mA

Operating Frequency: 433.92 MHz

Operational Temperature: 0°C – 60°C

Humidity: 5% – 95%

Antenna

3.5mm Plug

Mounting hole

LED

PAGE 1
Adaptor Transmitter TL-4015A Description: TL-4015A adaptor transmitter is an accessory to the TL-4015 that can send the messages of TL-4015 to the TL-4016P. Antenna Mounting hole LED 3.5mm Plug Installation: - Turn off the power of the TL-4015 before installation; - Insert the 3.
PAGE 2
FCC Statement FCC ID：2AROFTL-4015A Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.