IEEE802.11a/b/g Wireless LAN MiniPCI Module FX-DS540-MPCI6 User’s Manual (Installation Manual) CONTEC CO., LTD.
Chapter 1: General Description This document contains the specifications pertinent to the wireless LAN module (FX-DS540-MPCI6), which comply with IEEE802.11a, IEEE802.11b and IEEE802.11g. FX-DS540-MPCI6 is used attaching in the wireless LAN access point. Features 2.4GHz Wireless LAN module ・ IEEE802.11b and IEEE802.11g compatible ・ BPSK, QPSK, CCK, and DSSS modulation schemes supported Data rates 1, 2, 5.
Chapter 2: Characteristics Table1 : Mechanical Characteristics Dimensions 31.3 x 59.6 x 2.4 (mm) Weight 10g 59.6 25.5 (mm) Figure1 : FX-DS540-MPCI6 Table2 : Electrical Characteristics Nomial : 3.3V Supply voltage Vcc Extreme : 3.3V +/- 10% Strage temperature Humidity -20 to 80 deg.C 10 to 90%(no-condensing) Operating Temperature Humidity 0 to 70 deg.C 10 to 90%(no-condensing) Regulatory Domain 0x13 Supported Channel *1 IEEE802.11b/g : 1-11ch (2412-2462MHz) IEEE802.
Chapter 3: Setup FX-DS540-MPCI6 is used attaching in the wireless LAN access point. The wireless LAN access point is restricted only to CONTEC products. As an example, the case where it attaches in FX-DS540-STB-NR52-U is introduced. Attach a coaxial cable and fix. (2 places) Coaxial cable : U.FL-2LP-04N1-A-(80) (HIROSE) Fix with a screw lock.
Chapter 4: Notes When FX-DS540-MPCI6 is installed in the wireless LAN access point, the following remarks are to be considered: 1. FX-DS540-MPCI6 is designated its own FCC ID Number: PQRDS540-MPCI6AP; therefore, the FCC ID Number should be appeared on the label on the exterior of the wireless LAN access point unless it is visible from outside. Such label on the exterior should include a statement, either “Contains Wireless LAN Module FCC ID: PQRDS540-MPCI6AP” or “Contains FCC ID: PQRDS540-MPCI6AP”. 2.