PM10 Portable ECG Monitor Contec Medical Systems Co., Ltd.
Contents Foreword ............................................................................................................................................ II Chapter 1 Notice ................................................................................................................................. 1 1.1 Generic notice ....................................................................................................................... 1 1.2 Measurement notice .....................................
Foreword Thank you very much for purchasing the PM10 Portable ECG Monitor. This user manual introduces detail product information about its character, requirement, structure, performance, specification, appropriate methods of transportation, installation, usage, operation, repair, maintenance and storage, and safety measures of how to protect the operator and product. Please read details in the following chapters.
Chapter 1 Notice 1.1 Generic notice 1) Do not use the device in locations subject to high temperatures or humidity. Use in the temperature within 5 to 40˚C and humidity within 25% to 80%RH. 2) Do not wash the device with water. 3) Do not use or store the device in the following ambient conditions: Near fires or open flames Locations exposed to strong vibration Locations exposed to strong electromagnetic fields 4) Do not disinfect the device in autoclave or gas sterilizer.
2) 3) This equipment needs to be installed and put into service in accordance with the information provided in the ACCOMPANYING DOCUMENTS. Wireless communications equipment can affect ME EQUIPMENT and should be kept at least a distance d away from the equipment. The distance d is calculated by the MANUFACTURER from the 800 MHz to 2,5 GHz column of Table 5 or Table 6 of IEC 60601-1-2:2007. Chapter 2 Introduction The portable ECG monitor is designed for family and individual users.
Chapter 3 Primary Technical Orders 3.1 Normal work environment 1) Operation environment Temperature: +5℃~+40℃ Relative humidity: 25%~80% Atmospheric pressure:70kPa~106kPa Power supply: built-in rechargeable lithium battery, voltage: 3.7V 2) Transportation and storage environment Temperature: -40℃~+55℃ Relative humidity: ≤95% Atmospheric pressure:50kPa~106kPa 3.
Chapter 4 Operation Directions 4.1 How to use There are several measurement methods as shown in the following pictures. 4.2 Menu operations 1) Start-up Long press the on/off key for 2 seconds, you will hear a beep sound and see the screen lighting. The device will keep level off when not measuring. 2) Start measurement After start-up, the device will enter into pre-sample interface. Please use the correct measurement method as guided, the ECG waveform will displayed on the screen, as shown in Figure 4.
Figure 4.1 Pre-sample Interface When the waveform becomes stable, the device will start formal sampling automatically, the color of waveform turns to green, sample time countdown on the bottom right corner begins until finished one time sample. See Figure 4.2: Figure 4.2 Formal Sample Interface The device will enter into case review interface after completed sampling. Case review interface displays the sampling start time, heart rate and diagnosis.
When the device enters into case review interface, it will display the latest sampled case. Click the button to review other cases information. The device can store 99 pieces of cases at most. If reaches to the limit, new stored case will cover the original case, the one that stored at the earliest, piece by piece. The device will automatically turn to sampling interface to continue if the user holding the electrode at both ends again when the device is under the case review interface.
Chapter 5 Trouble Shooting and Solution If the device has a problem account, please look up the following sheet for solutions first, if not included in the following issues and you can not solve either, please contact with the customer service. Problem Cause Solution Start-up failure after long press the on/off key The batteries are worn out. Please recharge the batteries. Automatically shut down in using process The batteries are worn out. Please recharge the batteries. Your skin is dry.
6.3 Transportation and storage 1) The device transportation adopts general transportation means or follows the contract requirements. Avoid violent shock, vibration, rain and snow splash during the process of transportation. 2) Store the packaged device in an environment with temperature -40℃~+55℃, relative humidity no more than 95%, atmospheric pressure 500hPa~1060hPa, no corrosion gas and well-ventilated room.
FCC WARNING This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includinginterference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.