Construction Tools PC AB MDS system manual 2019-01-07
Page 1 of 3 Document ID TITLE SCDOC-74-6 MDS system manual AUTHOR DOCUMENT RESPONSIBLE Henrik Sihm Construction Tools PC AB VERSION DATE V0.4 2019-01-07 APPROVED BY 1 OVERVIEW MDS system measures distance between its nodes, which consists of three parts; one MDS-anchor mounted inside a remote control called MC11-OPS and two MDS-tags placed in the front and rear in a moving machine to which distance is measured. MDS is an acronym for Machine Distance Sensor.
Page 2 of 2 Document ID TITLE SCDOC-74-6 MDS system manual AUTHOR DOCUMENT RESPONSIBLE Henrik Sihm Construction Tools PC AB VERSION DATE V0.4 2019-01-07 APPROVED BY Figure 2: Principle diagram. Control of machine is transmitted via Bluetooth from remote control of machine. The MDS system is paired at the same time as the Bluetooth is paired. All processing and validation of distance data from MDS is done by ECU inside the moving machine.
Page 3 of 3 Document ID TITLE SCDOC-74-6 MDS system manual AUTHOR DOCUMENT RESPONSIBLE Henrik Sihm Construction Tools PC AB VERSION DATE V0.4 2019-01-07 APPROVED BY NOTE: Changes or modifications made to this equipment not expressly approved by Construction Tools PC AB may void the FCC authorization to operate this equipment. NOTE: This device complies with Part 15 of the FCC Rules and with Industry Canada licenceexempt RSS standard(s).
