Owner manual

Installation Guide
Digital Video EDID Emulator / HDMI Compliant 3D
TMDS-EDID
TM
DIP Switch for Default Resolution
The TMDS-EDID provides 8 different default video resolution combinations which can be freely
selected by shifting the HDMI EDID DIP Switch.
The description of each resolution combination is listed in the Selection Table below :
ON
OFF
SW1 EDID Clone Enable
EDID Clone Disable
Switch
None
SW1
Selection SW2
ON
OFF
ON
OFF
ON
OFF
ON
OFF
SW3
OFF
OFF
ON
ON
OFF
OFF
ON
ON
SW4
OFF
ON
ON
ON
ON
OFF
OFF
OFF
1080P, 1080i, 720P, 480P
2
1
4
3
6
5
8
7
Resolution
1 2
3
4
1080i, 720P, 480P, 480i
720P, 480P, 480i, 576P
480P, 480i, 576P, 576i
480i, 576P, 576i, 240P
576P, 576i, 240P
576i, 240P
240P
Installation
1 2
3
To use default EDID information ( Green light means ” Default ” )
Connect HDMI cable between
system and HDMI port
Connect HDMI cable from
display to HDMI port
Connect the optional DC 5V/2A
power adaptor or USB cable (B
connector) to supply DC power.
(While the green light is on. )
4
1 2
3
Press the DDC button
(The light will flash 3 times when
a display is initially cloned. When
the light changes from green to
solid orange, the clone has
succeeded.)
4
To use cloned EDID information ( Orange light means ” Cloned ” )
Connect HDMI cable between
system and HDMI port
Connect HDMI cable from
display to HDMI port
Special note :
In the majority of cases, the emulator should be used in "clone"
mode to provide optimal display settings for the display being
used. In the event that this is not possible (the display does not
provide DDC/EDID information, or it is otherwise not possible),
the emulator should be used in default mode. The EDID
information used in default mode is not for optimal viewing, but
rather to still provide a stable operating environment.
Connect the optional DC 5V/2A
power adaptor or USB cable (B
connector) to supply DC power
Select one default resolution
combination, then press
RESET button
TM
USB A
DDC
DISPLAY
Digital Video EDID Em ulator
HDMI Compliant 3D
1 2
3
4
ON
SYSTEM USB B
5V DC i n
Digital Video EDID Em ulator
HDMI Compliant 3D
RES ET
EDI D
SET TING
TM
Unit View
Power input regulated
DC 5V 2000 mA
System
EDID setting
Reset
USB B
DDC indicator
* Green = Default EDID
* Orange = Cloned EDID
DDC button
USB A
Display
Note :
Default EDID information is not optimal for the
particular display being used. It is a generic
configuration with standard resolutions that
might function with a variety of displays.
Features & Benefits
HDCP compatible
HD resolution and refresh rate emulation
Standard EDID data
Full EDID Cloning
Default & clone selectable
LED indication
Easy and compact design for installation and operation
Display side booster capability

Summary of content (2 pages)