User's Instructions

ManualsBrandsConnectedYard ManualsElectronicspH/ORP/temperature monitor that communicates seamlessly with cloud services to support user managed pool maintenance. All components of water quality management are monitored for the user. WiFi/BLE bridge is the primary interface to deliver data from

ACTIVE/85522894.1

IMPORTANT SAFETY INFORMATION/USER INSTRUCTIONS FOR

● pHin SMART MONITOR, Model No. CY-PM1510-A1, SKU HPM1510

● pHin SMART MONITOR, Model No. CY-PM1910-A1, SKU HPM1910

● pHin WIRELESS BRIDGE, Model No. CY-WB1500-A1, SKU HWB1500

● pHin WIRELESS BRIDGE, Model No. CY-WB1900-A1, SKU HWB1900

(each, a “pHin Device” and collectively “pHin Devices”)

DOWNLOAD THE pHin MOBILE APP AT www.phin.co/apps TO ACTIVATE AND USE

YOUR PHIN DEVICES.

pHin SMART MONITOR SAFETY INFORMATION

IT IS YOUR RESPONSIBILITY TO FAMILIARIZE YOURSELF WITH THE USER

MANUAL, WARNINGS AND ANY DOCUMENTATION PROVIDED TO YOU BY pHin

PRIOR TO EACH USE AND TO USE THE pHin SMART MONITOR PROPERLY,

INCLUDING AS FOLLOWS:

● To prevent fire or electric shock hazard, DO NOT use flammable substances or any type

of spray to clean the inside or outside of the pHin Smart Monitor. To clean simply wipe

the pHin Smart Monitor with a soft cloth.

● Do not expose the pHin Smart Monitor to temperatures below freezing.

● The pHin Smart Monitor may contain small parts and be otherwise hazardous to children.

The pHin Smart Monitor is not a toy - please keep out of reach of children and do not allow

them to play with it.

● Never tamper with, alter or attempt to repair the pHin Smart Monitor.

● CAUTION: Product contains a Lithium Coin Cell battery. Battery is not user

replaceable. RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN

INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE

MANUFACTURER’S INSTRUCTIONS

● If the pHin Smart Monitor malfunctions or fails to perform as expected, please contact us

at support@phin.co.

FCC ID: 2AHYC-CYPM1510

The pHin Smart Monitor has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. The pHin

Summary of content (9 pages)

PAGE 1
IMPORTANT SAFETY INFORMATION/USER INSTRUCTIONS FOR ● pHin SMART MONITOR, Model No. CY-PM1510-A1, SKU HPM1510 ● pHin SMART MONITOR, Model No. CY-PM1910-A1, SKU HPM1910 ● pHin WIRELESS BRIDGE, Model No. CY-WB1500-A1, SKU HWB1500 ● pHin WIRELESS BRIDGE, Model No. CY-WB1900-A1, SKU HWB1900 (each, a “pHin Device” and collectively “pHin Devices”) DOWNLOAD THE pHin MOBILE APP AT www.phin.co/apps TO ACTIVATE AND USE YOUR PHIN DEVICES.
PAGE 2
Smart Monitor generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
PAGE 3
pHin WIRELESS BRIDGE SAFETY INFORMATION IT IS YOUR RESPONSIBILITY TO FAMILIARIZE YOURSELF WITH THE USER MANUAL, WARNINGS AND ANY DOCUMENTATION PROVIDED TO YOU BY pHin PRIOR TO EACH USE AND TO USE THE WIRELESS BRIDGE PROPERLY, INCLUDING AS FOLLOWS: ● To prevent fire or electric shock hazard, keep away from rain or moisture. The Bridge must not be exposed to dripping or splashing. ● Never use any liquid (including water) or cleaning fluid or similar chemicals on or near the Bridge.
PAGE 4
Wireless Bridge Status Indicators When plugged into an outlet with power, there are three LED lights on the front of the bridge that will communicate bridge status. Top LED blinks once, about 10-12 seconds after the boot process is complete. ● Middle LED is normally on. If it is blinking, that suggests the device has been physically reset (by pin), and needs to be set up again. ● Bottom LED suggests the device is powered. It is almost always on. The moment the unit is plugged in, it will come on.
PAGE 5
• Contact support@phin.co for assistance. IC ID: 2878D-CYWB1500 This pHin Wireless Bridge complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
PAGE 6
sole and exclusive obligation to you, at its option will be to either (1) repair the defective pHin Device at no charge using new parts or parts that are equivalent to new in performance and reliability should the hardware revision allow for such repair, (2) replace the defective pHin Device.
PAGE 7
PARTICULAR PURPOSE. IF WE CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, pHin ALSO LIMITS THE DURATION OF ANY APPLICABLE IMPLIED WARRANTIES OR CONDITIONS TO THE DURATION OF THIS LIMITED WARRANTY AND TO REPAIR OR REPLACEMENT SERVICE. pHin MAKES NO WARRANTY THAT (I) THE pHin DEVICES WILL MEET YOUR REQUIREMENTS, (II) THE pHin DEVICES’ OPERATION WILL BE UNINTERRUPTED, TIMELY, SECURE, OR ERROR-FREE, OR (III) THE QUALITY OF THE pHin DEVICES WILL MEET YOUR EXPECTATIONS.
PAGE 8
RELEASE AND INDEMNITY You hereby agree to hold harmless and indemnify and defend pHin and its officers, directors, employees and agents from and against any and all liabilities, losses, damages, demands, claims, suits, actions, judgments, causes of action, assessments, costs and expenses, including, without limitation, interests, penalties, attorneys' fees, any and all expenses incurred in investigating, preparing and defending against any litigation, commenced or threatened, or any claim whatsoever, and an
PAGE 9
ConnectedYard Inc. A Hayward Industries Company 1841 Zanker Rd.