OEM installation manual Intersil ISL39000M IEEE 802.11a/g MiniPCI WLAN Card OEM installation Manual Version 0.
OEM installation manual Table of Contents 0-INTRODUCTION ....................................................................................................3 1-OEM INSTALLATION PROCEDURE.................................................................3 1.0 HOST PC NOTEBOOK ..........................................................................................3 1.1 INSTALLING THE MINIPCI CARD INTO THE HOST PC NOTEBOOK ....................3 1.2 INSTALLING THE SOFTWARE DRIVERS ...........................
OEM installation manual 0-Introduction The Intersil ISL39000M WLAN NIC is a complete wireless high speed Network Interface Card (NIC). It conforms to the IEEE 802.11g and IEEE 802.11a protocol and operates in the 2.45 GHz and 51505350MHz frequency bands. It provides a complete reference design evaluation platform of hardware and software to system providers or integrators requiring wireless data communications capability and is ideal for integration into computer platforms.
OEM installation manual fig, 01: Intersil WLAN icon e-double click the Intersil WLAN icon to open the WLAN settings, the following window will appear (see fig.02) fig, 02: Intersil WLAN settings window f-click on configuration tab and select which type of network is required (access point or Peer-to-peer mode), see fig. 03.
OEM installation manual g-select what TX rate is required (default setting is fully automatic) see fig. 04. fig, 04: WLAN tx rate setting window h-select what encryption type is required, 64 or 128 bit WEP (default setting is disabled) see fig. 05.
OEM installation manual i-click on the status tab to see the connection status (fig.06). fig, 06: WLAN network status j-click on the about tab to see the software drivers versions and MAC address (fig.07).
OEM installation manual 1.3 Wireless LAN installation guide lines and Authorization for use Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications made to this device that are not expressly approved by Intersil may void the user’s authority to operate the equipment.
OEM installation manual 2.4 FCC Radio Frequency Interference statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
OEM installation manual FCC ID: OSZ39000M Page 9 of 12
OEM installation manual FCC ID: OSZ39000M Page 10 of 12
OEM installation manual 2.7 Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. 2.8 Europe - EU Declaration of Conformity This device complies with the essential requirements and other relevant provisions of the European R&TTE Directive 1999/5/EC.
OEM installation manual 3-Technical Specifications Radio Technology Operating Frequency Modulation Schemes RF Channel Availability Data Rate Media Access Protocol Transmitter RF Output Power Antenna Type Operating Voltage Interface Formfactor Device driver Support FCC ID: OSZ39000M IEEE 802.11g and IEEE 802.11a (DSSS and OFDM) 2400-2497MHz ISM band and 5150-5350 MHz UNII band DQPSK, DBPSK, CCK, 16 QAM, 64 QAM 2.
