Preliminary OEM installation manual Intersil ISL37704M Indigo MiniPCI 5GHz WLAN Card OEM installation Manual Version 0.
Preliminary OEM installation manual Table of Contents 0-INTRODUCTION.................................................................................................... 3 1-OEM INSTALLATION PROCEDURE ................................................................ 3 1.1 HOST PC NOTEBOOK.......................................................................................... 3 1.2 INSTALLING THE MINIPCI CARD INTO THE HOST PC NOTEBOOK .................... 3 1.3 INSTALLING THE SOFTWARE DRIVERS..............
Preliminary OEM installation manual 0-Introduction The Intersil ISL37704M WLAN MiniPCI Card is a complete wireless high speed Network Interface Card (NIC) utilizing the Intersil PRISM® 5 chip set. It provides a complete PRISM 5 reference design evaluation platform of hardware and software to system providers or integrators requiring wireless data communications capability and is ideal for integration into computer platforms. It supports the IEEE 802.
Preliminary OEM installation manual d-the Intersil WLAN icon will appear in system tray on the bottom right of the screen (see yellow arrow in fig. 01) fig, 01: Intersil WLAN icon e-double click the Intersil WLAN icon to open the WLAN settings, the following window will appear (see fig.
Preliminary OEM installation manual f-click on configuration tab and select which type of network is required (access point or Peer-to-peer mode), see fig. 03. fig, 03: WLAN network type setting window g-select what TX rate is required (default setting is fully automatic) see fig. 04.
Preliminary OEM installation manual h-select what encryption type is required, 64 or 128 bit WEP (default setting is disabled) see fig. 05. fig, 05: WLAN encryption rate setting window i-click on the status tab to see the connection status (fig.06).
Preliminary OEM installation manual j-click on the about tab to see the software drivers versions and MAC address (fig.07). fig, 07: WLAN driver and MAC addres information 1.4 Wireless LAN installation guide lines and Authorization for use Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product.
Preliminary OEM installation manual 1.5 IEEE 802.11 frequency assignments This Indigo device is shipped with FCC-compliant firmware. In order to ensure regulatory-compliant channel usage in a particular country, special geographic-specific firmware is available for customer production assemblies which restricts channel usage. Examples include ETSI-compliant firmware, Japan -compliant firmware etc. Since the end user does not have the ability to alter this firmware, regulatory compliance is ensured.
Preliminary OEM installation manual 2-Regulatory information 2.1 FCC Information to User This product does not contain any user serviceable components and is to be used with approved antennas only. Any product changes or modifications will invalidate all applicable regulatory certifications and approvals 2.2 Agency and Regulatory Body Approvals This Indigo device complies with the standards as shown in table below: country USA European Union Japan Approval specification FCC part 15, sections 15.107, 15.
Preliminary OEM installation manual 2.5 Export restrictions: This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce export license. 2.6 FCC Guidelines for Human Exposure SAR (Specific Absorption Rate) for this device was measured in accordance with FCC OET Bulletin 65 (Supplement C) and guidelines established in IEEE C95.1-1991.
Preliminary OEM installation manual 3-Technical Specifications Radio Technology Operating Frequency Modulation Schemes Data Rate Media Access Protocol Transmitter RF Output Power Antenna Type Operating Voltage Interface Device driver Support FCC ID: OSZ37704M IEEE 802.11a (OFDM) 5150MHz – 5350 MHz DQPSK, DBPSK, CCK, 16 QAM, 64 QAM Support for 54, 48, 36, 24, 18, 12, 9, and 6 Mbps data rates CSMA/CA with ACK 5150-5250 MHz: < 17.0 dBm EIRP (typical) including antenna gain 5250-5350 MHz: < 20.