User's Manual

ManualsBrandsConexant Systems ManualsElectronics5GHz Low Power Cardbus WLAN Card

Table Of Contents

Section xx: Regulatory notes
IEEE802.11 frequency assignments
- USA-FCC (Federal Communications Commission) statement
  - FCC Interference Statement
    - FCC Guidelines for Human Exposure

ISL37704C Indigo Cardbus manual (preliminary)

Page1of3

Section xx: Regulatory notes

IEEE802.11 frequency assignments

UNII

band

channel

Frequency FCC

USA

ETSI

MKK

Japan

Singa-

pore

Tai-

wan

34 5170 X

36 5180 X X X

38 5190 X

40 5200 X X X

42 5210 X

44 5220 X X X

46 5230 X

5150

5250

48 5240 X X X

52 5260 X X X X

56 5280 X X X X

60 5300 X X X X

5250

5350

64 5320 X X X X

149 5745 X X X

153 5765 X X X

157 5785 X X X

5725

5850

161 5805 X X X

Table xx: IEEE802.11a channels

Caution: Within 5.15 to 5.25 MHz bands, UNII devices are restricted to indoor operations to reduce

any potential harmfull interference to co-channel Mobile Satelite Systems (MSS) operations.

This Indigo device is shipped with FCC-compliant firmware. In order to ensure regulatory-compliant

channel usage in a particular country, special geographic-specific firmware is available for customer

production assemblies which restricts channel usage. Examples include ETSI-compliant firmware, MKK

-compliant firmware etc. Since the end user does not have the ability to alter this firmware, regulatory

compliance is ensured.

Agency and Regulatory Body Approvals

This Indigo device complies with the standards as shown in table below:

country Approval specification notes

USA FCC part 15, sections 15.107, 15.109, 15.207,

15.209, 15.407

Tested at accredited laboratories

and filed for FCC certification.

European Union EN 301 893 V1.1.1 (2001-01)

ETSI EN 301 489-1 V1.3.1 (2001-07)

ETSI EN 301 489-17 V1.1.1 (2000-09)

EN60950 incl A1, A2, A3, A4

Tested at accredited laboratories

and Notified according to article

6.4 of the RTTE directive

Japan ARIB STD T71 v.1.0, 14 december 2000 Tested at TELEC laboratories

and filed for MPT Japan

certification.

Table xx: Compliance specifications

USA-FCC (Federal Communications Commission) statement

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. this device must accept any interference, including interference that may cause

undesired operation of this device.

Summary of content (3 pages)

PAGE 1
ISL37704C Indigo Cardbus manual (preliminary) Section xx: Regulatory notes IEEE802.11 frequency assignments UNII band 1 RF Frequency channel 34 5170 36 5180 5150 38 5190 5250 40 5200 42 5210 44 5220 46 5230 48 5240 2 52 5260 56 5280 5250 60 5300 5350 64 5320 3 149 5745 153 5765 5725 157 5785 5850 161 5805 Table xx: IEEE802.11a channels FCC USA ETSI EU X X MKK Japan X Singapore Taiwan X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X Caution: Within 5.
PAGE 2
ISL37704C Indigo Cardbus manual (preliminary) FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy.
PAGE 3
ISL37704C Indigo Cardbus manual (preliminary) Standard Description and Explanation and services; Part 1 V1.2.1 (2000-08) Part 1: Common technical requirements Part 17 V1.1.1 (2000-09) Part 17: Specific conditions for Wideband data and HIPERLAN equipment ETSI RF specification Broadband Radio Access Networks (BRAN), HIPERLAN Type 2 EN 301 893 Harmonised EN covering essential requirements of article 3.2 of V1.1.