User's Manual

Supplemental User’s Manual
INTEGRATION INSTRUCTIONS per FCC KDB 996369 D03, Section 2.0
2.2 List of applicable FCC rules
The module has been certified for use under FCC Part 15.249 only
2.3 Summarize the specific operational use conditions
The host device must be tested for spurious emissions due to the module’s lack of its own shielding.
2.4 Limited module procedures
The host device must be tested for spurious emissions due to the module’s lack of its own shielding.
2.5 Trace antenna designs
Antenna is integrated into module and the module should be used with no other antennas
2.6 RF exposure considerations
Device is inherently compliant with RF exposure requirements since it meets 15.249 requirements
2.7 Antennas
Antenna is integrated into module and the module should be used with no other antennas
2.8 Label and compliance information
Module contains its own label
2.9 Information on test modes and additional testing requirements
None required.
2.10 Additional testing, Part 15 Subpart B disclaimer
This module has been tested and certified to comply with FCC Part 15C requirements. The host
device to which it is installed may require additional testing to show compliance with FCC Part 15B
requirements.