User's Guide

Asset GPS Tracker
User Guide
(Version 1.3)
To ensure quickly and correctly use, please read
this manual carefully before using. Any changes
to the product appearance, color or accessories
are without notice.
1.Overview
1.1 Main Functions
·GPS + LBS + WIFI positioning
·Intelligent power saving
·IPX5 waterproof grade
·Tamper alert
·Strong magnet installation
·Fast charging
·10000mAh battery
·Listen-in
1.2 Specifications
Frequency
Location accuracy
Monitoring range
Working voltage/ current
Battery
Working hour
LED
Operating temperature
Dimension
Weight
GSM 850/900/1800/1900MHz
<10 meters
≤5 meters
3.7V/ 60mA
10000mAh/3.7V industrial grade
lithium polymer battery
30 days (drive for 2 hours a day)
Red: work status
-20℃— +70℃
108(L) x 61(W) x 30(H) mm
285g
2.Appearance
2.1 Appearance
Notch
MIC
GSM
status indicator
SIM card
Cover remove
detection switch
Anti-tamper
button
Battery indicator
Power
2.2 Standard Accessories
Device
Bracket
User guide
Charger
Charge cable
1
1
1
1
1
2.3 GSM Indicator
Status
Flicker quickly ( every 0.3
seconds)
Flicker slowly ( 0.1s on;
2s off)
Always ON
Meaning
GSM initialization/ No GSM signal/
No SIM card
Login platform
Calling
GSM indicator is off after the device power on for 3 minutes.
If device power on, shortly press the power button to activate
LED, which will be off in 60 seconds.
3. SIM card
SIM card should have access to GPRS and SMS.
Remove the cover, switch to OFF and insert the SIM card.
Notch
Battery switch is on OFF
position
SIM card:Insert SIM
card
4. Installation
With strong magnet, the device has easy installation and can
absorb on any magnetic item. Attached 3M foam tape and
bracket help fix the device on non-magnetic items.
3M sticker
Stand
5. Operation
Power on: Press power button for 3 seconds ( battery switch is in
ON position)
Power off: Press power button for 3 seconds
5.1 Power ON/OFF
Set SOS number via APP, GPS tracking platform or SMS (SMS
only valid in tracking mode)
1.SMS command to add SOS number:
SOS,A, number 1, number 2, number 3#
E.g. SOS,A,1351234xxxx, 1371234xxxx,1301234xxxx#
2.SMS command to delete SOS number:
SOS,D,number sequence 1, number sequence 2, number
sequence 3#
E.g. SOS,D,1,2,3#
3.Query current SOS number:SOS#
5.2 SOS Number
(1)Tracking mode (default): GSM is always ON and location data
uploaded in set time interval. Time interval can be set on APP or
designated platform.
5.3 Working Mode
“2” means ultra-standby mode.
“T1” means the start time of sleeping period. Format:
HH:MM.
“T2” means the sleep time interval, range 1-72(hours).
Default: 24 hours.
Note: SMS command takes effect after device wakes up.
E.g.MODE,2,12:00,8# (Meaning: Device starts to fall asleep at
12:00, and wakes up every 8 hours)
The anti-tamper button will pop out and alert will be sent if the
device is disassembled.
In standby mode, alert message will be uploaded and tracking
mode will be activated for 20 minutes if device dis-assembly is
detected. After 20 minutes, device enters into ultra-long standby
mode. Dis-assembly alert can be turned off by command: cancel#
5.4 Tamper Alert
Cover detection button pops out and alert will be sent when
device cover is dismantled.
In standby mode, alert message will be uploaded and tracking
mode will be activated for 20 minutes if cover dismantlement is
detected. After 20 minutes, device enters into ultra-long standby
mode. Dis-assembly alert can be turned off by command: cancel#
5.5 Cover Remove Alert
When battery is low, the device will activate low battery alarm.
5.6 Low Battery Alert
6.2 Download APP
Please download and install the APP in designated website,
APP store or Google Play store.
7. Warning
Battery specified by manufacturer is recommended.
Maintenance or service arising from any other accessories
is not guaranteed.
Manufacturer assumes no responsibility for any damage caused
by non-original accessories.
Do not bend or open the battery.
Do not immerse or burn the battery.
Device dis-assembly is strongly forbidden.
Nonprofessionals’ operation may cause device damage.
Troubleshooting
If you are having trouble with your device, try these
troubleshooting procedures before contacting a service
professional.
Unable to
boot
Power switch is off Switch to ON
No battery
No SIM card
charge
Insert SIM card
Unable to
connect to
the network
SIM card inserted
incorrectly
Check SIM card
Dirty things exist
above the SIM card
Clean SIM card
Invalid SIM card Contact network
supplier
Not in GSM service
area
Move to service area
Poor signal Move to area with
strong signal
Fail to locate SIM has no access to
GPRS
Contact network
supplier to get GPRS
service
Always reply “Address
inquiry failed”
Contact supplier
Warranty instructions and service
.
4. Repair or replacement under the terms of this warranty does
not provide right to extension or renewal of the warranty period.
5. The warranty is not applicable to cases other than defects in
material, design and workmanship.
Maintenance Record
Date
Serviced by
Product Model
IMEI Number
Fault
Descriptions
Comments
Push and loosen
the button will
trigger tamper alert
Notice: In this mode, all command will NOT be executed until
the device wakes up at preset time interval. If you want to
compel the device to wake up and receive command, you can a.
By trigger the tamper alert button at the back; b. By unplug the
battery and plug it in again.
SMS command format:
MODE,2,T1,T2#
SMS command format:
MODE,1,T1,T2#
1 means tracking mode
T1: upload interval of GPS data in moving status,
unit: second, 10-3600s; default: 10s
T2:upload interval of GPS data in static status
unit: second, 180-86400s; default: 3600s
(2) Ultra-long standby mode: device wakes up and uploads
location data in a fixed time.
USB
Battery
switch
5.7 Vibration alarm
The vibration alarm only works in mode 1 (tracking mode). To
activate this function, please send 111 first to the SOS number and
the device will be in arming status. To turn on the vibration alarm,
please send command SENALM, ON#
SMS command for device disarming: 000
5.8 Geo-fence alarm
5.9 Voice monitoring
The geo-fence alarm only works in mode 1 (tracking mode). When
the vehicle enter/exit the preset geo-fence area, the device will
send alarm to the SOS numbers when the geo-fence function is
ON.
Use preset SOS number to send command MONITOR# to the
device. Device would automatically call you back in a second. Pick
up and monitor the voice inside the vehicle.
BOOTALM,OFF#
Turn off the power on alarm.
5.10 Power on alarm
Alarm will be sent when the device starts. SMS command:
BOOTALM,A,M#
A=ON/OFF；default：ON
M=0～3；alarming way，0 : GPRS，1 : SMS+GPRS；M=2
GPRS+SMS+ calling; M=3 GPRS+calling; default：0；
5.11 Power off alarm
Alarm will be sent when the device power off. SMS command:
PWROFFALM,X,M#
X=ON/OFF；default：ON
M=0～1；alarming way，0 : GPRS，1 : SMS+GPRS； default：
0；
5.12 Power off restriction
When power off restriction command is sent by SOS numbers,
the device can’t power off by pressing the power button.
PWRLIMIT,X#
X=ON/OFF；ON：means allow to power off，OFF：means
power off forbidden;
PWRLIMIT#
Check ON/OFF status.
2. Our obligations are limited to repair of the defect or replacement
the defective part or at its discretion replacement of the product
itself.
3. Warranty repairs must be carried out by our
Authorized Service
Centre. Warranty cover will be void, even if a repair has been
attempted by any unauthorized service centre.
Problems
Causes Solutions
The signal waves are
unable to transmit
when use the GPS
tracker in the places
that have poor signal
reception, such as: tall
building around or
basement.
Using the GPS tracker
in the places that have
good signal condition.
Poor signal
1.The warranty is valid only when the warranty card is properly
completed, and upon presentation of the proof of purchase
consisting of original invoice indicating the date of purchase,
model and serial No.of the product. We reserve the right to refuse
warranty if this information has been removed or changed after
the original purchase of the product from the dealer。
6. Platform & APP
6.1 Login service platform
Please login the designated service platform to set and operate
the device.
FCC ID:X7IAT4
Product can't talk, can't transmit
data over usb.