Contents Safety Guidlines Important safety instructions Safety· compliance Warnings Warranty Information At a glance ZX800 Features Radio Operation Weather Band DVD/CD/MP3/MP4 Operation Short Range Wireless Syncing Placing a Call - zxaoo Placing a Call - Remote Remote Control Guide System Setup Lanugage Audio Viudeo Speaker Digital Troubleshooting Remote Memorization Wiring Diagram Accessories ZX800 Specifications FCC Compliance 2 2 3 4 6 10 13 14 17 18 19 20 25 26 27 28 29 30 31 32 WARNING- To reduce t
WARRANTY ONE (1) YEAR LIMITED WARRANTY The Manufacture warrants to :the original·retail purchas.er of this This warranty extends.only:to the original.· purchaser of the unit and is not transferable. Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation on incide tal or consequential damages, so the above limitation of exclusions may not apply to you.
CD/MP3/MP4/DVD Disc Player Compatible with·standard size.CD,-MP3~, MP4 and DV.D discs {4.75" or 12cm). The ZX800 is designed to read standard CD, MP3, MP4, DVD, DVD+R, DVD-R Disc. Because of variations in recording methods some discs may not play on this unit. This unit will play region 1 DVD's {USA and Canada). USB I SO Card This unit allows users to play files stored on both USB and SD cards including MP3 music, MP4 short video clips and JPEG photo files.
Short Range Wireless Link This·unit contains ShortRange. Wrretessc~wirefess technology enabling secure, wireless connections between portable and fixed devices. This unit, when enabled can place and receive cellular phone calls through the zxaoos keypad and built in microphone. The ZX800 Short Range Wireless link also enables handheld control of streaming music from·users wireless device play list.
ZX800 FEATURES ® ® ', ~.. - '' ',, (r' ' ,· "' ,Iii\, ·~\!.
CD Q) VIDEO SETUP POWER Turns the power on and.off. Press for OVD setup menu. Menu navigation screens wiU appear on Video Monitor. CD o-9 ® Radio Mode: Use for preset stations (frequencies), 27 FM stations and 18 AM stations available. Disc Mode: Selects different tracks on CD and different chapters on DVD. Phone: When paired with a Short Range Wireless enabled cell phone the number keys become a touch tone keypad allowing you to dial phone calls from the zxaoo IR Infrared remote sensor.
ZX800 FEATURES @ SPEAKERS A-B- C Turnssound~onoroff @ CD/MP3/MP4/DVD Disc loading slot lnsert a disc to play. Compatible with standard size· CD, . MP3, MP4and DVD discs {4.75"or 12cm). The GT-31s designed to read standard CD, MP3, MP4, DVD, DVD+R, DVD-R Disc. Because of variations in recording methods some discs may not play on this unit. This unit will play region 1DVD's (USA and Canada). @ PREVIOUS I NEXT Double Arrows Radio Mode: Press these buttons for station seek. @ F. FWD in corresponding.
@ PLAY I PAUSE Press to ptaydisc or-pause playback otdisc_ @ JTAGport Used for firmware upgrades by authorized Genesis Technologies technicians only. @ AU1 Port Audio Input from MP3 or iPod player. This is a 3.5 MM input. ZXSOO DISPLAY SCREEN ~~f=-®...::.oo::;_'___==:l lCD CFJ'[ L: _ I@ CD CD ® jl~ L::::.J _j '"---------' (D STEREO @ SD Card slot Reads media stored on SO cards. The ZX800 supports SO cards with up to 8GB capacity. The SO card must be formatted to be FAT,or FAT32.
RADIO OPERATION CD FM1 I Frequency Indicator 89.9 CH 1 CD Preset Numeral Indicator I CD Band Indicator POWER Turns the power on and off. Press for power "On or Off' ~/FMIWB Radio Reception Mode ) Activate radio Press to access the radio, press to activate desired band: AM1, AM2, FM1, FM2, FM3 or WB (Weather Band Chanel1-7) ( AM/FMIWB) Manual Tuning Select Band Select Band, Select singl~· arrQ\Yed button to move the chanels downorup.
Auto s·ea.rch~ Tuning· Push to auto search for an available station at a higher or lower frequency. When this function is selected the unit will stay at the selected station untill another function is selected. Manual Frequency Presets CAM/FMIWB) FRWO F·FWD Select Band Auto Search Down Auto Search Up ( AM/FMIWB j Select Band, Select desired frequency, Hold desired numeral for 3 seconds. Frequency is set. Repeat to change. Frequency can be preset for AM1, AM2, FM1, FM2, FM3.
RADIO OPERATION Auto Best Station Memory ( A.M/FMIWB - While in FM1 if you press the FAST FWD button the radio will start scanning from low to high frequencies.,or FAST RWD button the radio will start scanning from high to low frequencies. Each strong station found will be stored in a preset button until all27 FM presets are full. You can also do this with the AM band. There are 18 presets available for the AM band.
WEATHER BAND Weather Band Reception Press the AM/FMIWB button to select the Weather BancJ. Once the unit is set on the Weather Band function, it will automatically search for an available station among the 7 preset US Weather Bureau frequencies. When the signal is not strong enough to receive the last weather band station, the unit will continue to search for another weather band station. The user can also manually select a weather band station by pressing any of the 1-7 preset number frequencies.
DVD/CD/MP3/MP4 OPERATION CD Chapter on DVD I Tack on CD-MP3 I I 01-02-05:15 I I CD Title of DVD I I CD Elapsed Time on DVD-CD-MP3 LOAD load a Disc There are several ways to select and load a disc in the ZXBOO. If you have left a disc in the unit you will have to press MODE on the front panel until LOAD shows on the display. If you are using the remote, press the DISC button. Either of these options will start the disc playing.
PLAY I PAUSE Normally, when the unit accepts a disc with no Playback Control, the unit will play the disc from the beginning. When a Playback Control exists, the user needs to push the PLAY button to start to play the disc. If the user pushes this button again, the unit will pause the disc. To release Pause, push this button again, and play will continue. Stop When the unit is playing, push the STOP button to stop playing the disc.
DVD/CD/MP3/MP4 OPERATION Previous I Next Pushing.the Previousbutton, the unit wiBplay,tflediscfrom·the beginning of the previous track. Pushing the Next button, the unit will play the disc from the beginning of the next track. Video Setup Press the VIDEO SETUP button on the unit when the unit is in the Disc player mode. The screen will display the system setting menu. Navigate the Menu pages by using remote NAVIGATION buttons.
SHORT RANGE WIRELESS PAIRING Pairing_theZXSOO,with-a-Short,Range-Wireless:devicePress the "PHONE MUSIC" button to enter setup With the ZX800 powered on Press the button marked "PHONE MUSIC" to enter Short Range Wireless setup. The ZX800 screen will report "NO LINK" until a Short Range Wireless device is successfully paired with the zxaoo. The ZX800 will send a password request to the Short Range Wireless device that reads ~~nter a numeric PassKey for Conkey is (0000). Enter the 4 nl.oc:k.tf'l:e\Stlotf·Rang
PLACING A CALL - GT3.0 ( MODE ) OR Placing a call with the ZX800 Using:_ the:Ra-dio:: b.u ttons Press the To place a call using the ZXBOO wrrh a paired Short Range "MODE" button Wireless enabled cell phone first enable the ZXBOO Short Range or press the Wireless mode by pressing the "MODE" button or by pressing the "PHONE MUSIC" "PHONE MUSIC" button above the SO slot until "BT" and "LINK button OK" appears on the ZXBOO display. Using the ZXBOO keypad dial the desired phone number.
PLACING A CALL - REMOTE Placing a call with the ZX800 Using the Remote buttons To place a call using the ZX800 with a paired Short Range Wireless enabled cell phone first enable the remote by pressing the remote button marked "ZXBOO". Next, enable the zxaoo Short Range Wireless mode by pressing the remote button marked "INPUT" until "BT" and "LINK OK" appear on the zxaoo display. Using the remote numeric;,keys dial the desired phone number then press the remote~uuon m.arked "NEXT" to initiate the call.
REMOTE CONTROL Guide CD Eject When the unit is in Disc Ptay,mode,.pushing the_"EJECT" button will eject the disc. When the unit ejects a disc and the disc is not removed after 1 minute, the unit will automatically reload the disc. CD Disc Press to select Disc mode when a disc is already in the unit. CD USB I SD Press to select USB or SO. To view, navigate and select between music and video/photo media the TV or MonHor must be on and set to AV mode. Use NAVIGATION buttons to navigate on screen menu.
0 CD ability. The learning procedure is explaind in Remote Memorizing,. page.26~27. CLOCK TO change clock settings press and hold ClOCK/Band l
REMOTE CONTROL Guide @ ENTER Use to~ finalize selection~ A, B, and C. Press it again to resume the previous sound levels. Pressing-the BC button for5 seconds returns the. system to default settings. @SETUP Press the "SETUP" button to activate the System Setup on screen display Video Monitor menu . Use the NAVIGATION buttons to navigate the OSD menu options. @SLOW Slows on-screen action in DVD. Press to select from 7 different levels of Slow. DVD Mode: Press "SLOW" button to enable 2X Slow Advance mode.
@ INPUT Press to select AUt, AU2,AV1- orAV2:andBT. @ Radio This function selects the Radio. @PROGRAM CDNCD: You can set the program order to play, by following the steps below. Press "PROGRAM" button and the LCD displays programming POO:OO. You can set the program order to play them by using (0-1 00+) number button, and then press "PLAY/PAUSE" to play. Note: (1) Program does notfunction in playing MP3. {2) CD -Only.. Allows you tore..
REMOTE CONTROL Guide @ PLAY I PAUSE Press:"P,LAY/PAUSE" button to suspend.the playback of CD, MP3, MP4, VCD and DVO media. Press it again to return to normal playback mode. ® PREVIOUS I NEXT Radio Mode: Press to select higher or lower stations. Disc Mode: Press to select previous or Next track or chapter. Pushing the Previous button, the unit will play the disc from the beginning of the previous track. Pushing the Next button, the unit will play the disc from the beginning of the next track.
SYSTEM SETUP Press the ·sETUP" button to activate the System Setup on screen display Video Monitor Only menu . Use the NAVIGATION buttons to navigate the following OSD menu options.
LANGUAGE SETUP 26
AUDIO SETUP 27
VIDEO SETUP 28
SPEAKER SETUP ...
DIGITAL SETUP 30
TROUBLESHOOTING No Power • Check and make sure whether theJuse· is blown~ replace fuse with proper value if' necessary~ Disc error appears. • The disc may. be .damaged or dirty~ Clean cfrsc and~ retry. Some errors occur in the LCD or no function when pressing the button. • Turn off the unit and restart the unit again. Use Factory Default Restart. When there is no color on video. • Turn off the unit and restart the unit again. Use Factory Default Restart. Poor radio reception or static.
REMOTE MEMORIZATION The remote is preset to work with the ZX800 when the "ZX800" button is_pressed first The remote is also capable of learning "TV", "Cable" and "Satellite" functions using the following instructions. To Learn TV Functions do the following: 1. Point the top of ZX800 remote 2 to 3 inches from the top of the TV remote. 2. Press and hold the "TV" button on the ZX800 remote for 3 It is advised that you read steps 1, 2 and 3 before attempting to program functions.
3. Program TV's POWER button. While the ''EJECT" button is lit press the ZXSOO"POWERB button and the ·redJightwillstow flash. While this light is slow flashing, quickly press the POWER button on the TV remote. If the red light quickly flashes three times and then continues steady you have succeeded. To memorize and to exit learning mode press "TV" on the zxaoo remote. To verify press the "TV" button on the zxaoo remote and then press the "POWER" button. The TV's power should come on.
WIRING DIAGRAM [[)]::It [[)])I [[)]::It [[)]::It FM I AM Radio Antenna .-11 --------llllll..LJ IR - Infrared Reciever Input AV2 Audio I Video Input· VIdeo In VIdeo Output 1 AV2 Audio I Video Input • Left VIdeo Output 2 AV2 Audio I Video Input • Right __ ....__ Low Level Aodlo Output • Left Low Level Aodlo Output • Right [ [ ) ] ) AU2 Audio Input • Left [[)]::It VIdeo Output 3 lllf'1ll---, __...__.~ AV1 Audio I Video Input • VIdeo In _____ AV1 Audio l VIdeo Input - Left ...
A: 1. .----......., 2. 3. .----......., 4. 5. 6. 7. .----......., 8. 9. 10. C: White/Black- Left Front{-) White - Left Front {. } Yellow/Black- Right Front{-) Yellow- Right Front {• ) Green/Black- Left Rear{-} Green - Left Rear ( ) Gray/Black- Right Rear(-) Gray - Right Rear ( ) Brown/Black- Center(-) Brown - Center ( ·) 1. Dark Blue /Black- SUB 1 {-) - - · 2. 3. 4. 5. 6.
ACCESSORIES onyX Wall Plate onyX reciever installiation 1. Press the top of the spring loaded onyX wall plate cradel to release the cradel from the wall plate. 2. Insert the onyX reciever into the cradel. 3. Press and push the top of the onyX reciever Into the wall plate to finish the installiatlon.
ZX800 SPECIFICATIONS FCC COMPLIANCE Overall Dimensions 8-3/6" (W} x 11• (H) x 6" (D) Mounting Dimensions 6-314" (W)x. ~t!2':"(H} x 51l {0) Net Weight 61bs (3.35Kg) Voltage 12V DC Negative Ground (11.0V- 15.0V allowable) Maximum Current Consumption 1OA Total Continuous Power Output 200W Load Impedance 4C (4-8C allowable) Total harmonic distortion-plus-noise Typical 0.05% Maximum 0.
CONCERTONE zxsoo