Installation Guide

Wall Mounted Stainless Pot Racks
Models PR-40903 and PR-40904
Page 1
Concept Housewares, A Division of PR Housewares, LLC
www.prhousewares.com Email: [e-mail]
Photo A - Fully Assembled
Photo B - Pan Hooks
Photo C - Wall screws, plastic
anchors and plastic key
Assembly:
To install, you will need the following:
- Pencil and tape measure
- Phillips head screw driver and or a standard or at head
screwdriver
- Hammer
- Electric drill and 5/16 drill bit
Parts:
- Main unit (See Photo – A)
- Pan hooks, PR-41208 and PR-41205 (See Photo –B)
- Package of wall screws, plastic anchors and plastic key (See
Photo – C)
Please consult with your local hardware store if you have
any questions or concerns about the construction of your
walls or ceilings. ey can assist you in selecting the proper
hardware and procedures. e generic hardware provided
will work for most drywall applications. NOTE: these units
are handmade, slight variations can exist, always measure
twice before drilling.
Mounting Directions:
Assemble rack with all supports, then with rough frame
work constructed use as a guide for installation. Measure
carefully where you want to mount the rack on the wall use
a pencil to mark where the screws attach to the wall.
Remove the unit and drill holes using a 5/16” drill bit. When
/ if possible mount to a wall stud. Supplied anchors have a
pull rating of 20 lbs. or more each and a shear rating of 50
lbs. each.
Insert the anchors into the drilled holes. ey may need to be
tapped in gently with a hammer. Use the supplied key to expand the
anchor behind drywall. (See Photos B to F on next page for proper
and improper anchor install). Use
supplied screws to attach.