USER’S GUIDE Nu2000R One -Way FM Remote USER’S GUIDE Nu2000R StaubElectronics, Ltd. www.NUSTART.
TABLE OF CONTENTS - Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4 - Remote : Nu2000R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4 - Remote Button Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5 - Remote Learn Routine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information Remote Button Functions Please take these safety precautions i nto consideration under the following conditions : 1. Servicing the vehicle When servicing your automobile (i.e. changing the oi l, washing your car) , the NUSTART systemshould be in Valet Mode. There is a safety shutdown switch under the hood that deacti vates the remote star ter function if the hood is open.
Step1: Activate Valet/ Programming mode by manually turning the ignition on and off five times (between Acc and On) with the key within a 7 second period. The parking lights will flash once with successful completion of this step. Step2 : Within a 7 second period after cycling the ignition for the 5 th time, Press the button for a 1/2 sec. The parking lights will flash once to confirm that the transmitter has been programmed. You can continue programming additional remotes.
Continuation Mode : (Stop and Go feature) While your vehicle is running with your key, press the button for 2 seconds, you are now in the continuation mode. Your engine will continue running for the preset time even if you take your key out of the ignition. You can now lock/arm the vehicle if you wish to. Example : For a quick stop when you don’t want to restart the vehicle.
Ifthe Anti-Jacking option has been programmed (askyour dealerifyou would like to have this option)and the Ignition-Kill has beeninstalled , the Panic Mode works as Anti-Jacking ifthe keyis in the ignition. IfAnti-Jacking mode is activated while key is in the ignition, a) the siren will go off for 1.5 minutes, and b) the Ignition-Kill will be activated after the first 30 seconds. This is to give a 30 second warning to the hijacker, then to disconnect the ignition to stop the vehicle.
In this m ode, if the emergency brake has been engaged, the engine willconti nue to r un after the key has been taken out of the i gni tion. It will run until two minutes after the emer gency brake has been set. To utilize this m ode, the emergency brake sensing wire has to be connected to the emer gency brake wire of the vehicle. Consult the authorized dealer for this mode. Thi soption is i dealfor turbo charged vehicles because it allows the turbo to cool down after operati on.
Staub Electronics Ltd. is not RESPONSIBLE OR LIABLE FOR ANY DAMAGES WHATSOEVER,INCLUDING BUT NOT LIMITED TO, ANY CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of NUSTART. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE.
