User's Manual

ManualsBrandsCompupal Group ManualsAudio EquipmentBluetooth Light Speaker

Bluetooth Light Speaker Quick Start Guide

Introduction

This Bluetooth Light Speaker is a perfect combination of LED lamp and Bluetooth Speaker. It

can be controlled by iOS or Android system with application installed. You will be surprised to

match it well with your desk lamp. Enjoy it!

The Package Contents

1x Bluetooth Light Speaker

1x Quick Start Guide

Caution

1. Please read and follow all instructions before operating this product.

2. Heed all warnings on the product and in the operation instructions.

3. Please cut power off before install or uninstall the product.

4. When LED lamp on, suggest not touch the product surface in case being burned.

5. Suggest not use metal lampshade in case the wireless signal suffers from

attenuation.

6. With LED lamp on, if not plan to listen music, suggest to turn Bluetooth off by

pressing Bluetooth power button on application interface. It can save power, extend

Bluetooth lifetime and reduce interference to lamp from Bluetooth.

7. With LED lamp on and brightness not reaching 100%, there maybe some slight

background noise which is normal.

8. External dimmer does not work for the product. You can adjust lamp brightness by

using application on iOS or Android system.

9. Do not open the product to avoid electronic shock. Repair has to be performed by a

qualified technician.

10. Cut power off if not to use the product for a long period of time.

11. The product has a wireless transmission distance up to 33ft, but wireless

performance may be affected in different operating environment.

12. Keep the product out of extreme heat and humidity. Do not install it near heaters,

stoves or any other source of heat.

13. Do not use the product during lightning storms. Turn the power off to prevent damage

to the product due to lightning and power-line surges.

14. Please do not stare at the light source for a long time to protect your eyes.

15. If cleaning is required, use a soft dry cloth. Before cleaning, unplug the device from

the electrical source.

Product Installation

1. Take the Bluetooth Light Speaker and Quick start guide out of your package.

2. Before installing the Light Speaker into your lamp system, make sure the power is off.

3. Screw Light Speaker into E26 socket.

4. Turn the power on, white LED will be lit and speaker will enter Bluetooth pairing status with

indication LED blinking fast in blue.

Summary of content (5 pages)

PAGE 1
Bluetooth Light Speaker Quick Start Guide Introduction This Bluetooth Light Speaker is a perfect combination of LED lamp and Bluetooth Speaker. It can be controlled by iOS or Android system with application installed. You will be surprised to match it well with your desk lamp. Enjoy it! The Package Contents 1x Bluetooth Light Speaker 1x Quick Start Guide Caution 1. Please read and follow all instructions before operating this product. 2. Heed all warnings on the product and in the operation instructions. 3.
PAGE 2
Bluetooth connection to enter control interface 1. Download “LS10BT APP” from Apple app store or Android application market and install it on your mobile phone with Android system 4.3 or higher version (or with iOS system 7.0 or higher version) 2. Touch “LS10BT APP” icon on your mobile phone to go to below interface. Notification 1. Touch “Bluetooth search” to rename your Bluetooth Light speaker. For example: “Light APP” 2.
PAGE 3
Bluetooth connection for audio 1. Make sure Bluetooth Speaker is at pairing status (indication LED blinking fast in blue and you can lower white LED brightness by phone control interface to check indication LED status better) 2. Make sure Bluetooth device (smart phone, pad etc) has open Bluetooth. 3. Enter Bluetooth interface to search for new device and select “MG-LBTS01APP” for paring. During pairing, some Bluetooth devices require to enter password. Just type four zeros “0000”. 4.
PAGE 4
FCC ID: Z5YMG-LBTS01APP Trouble shooting See below for solutions to common problems. If you have more questions to your Bluetooth Light Speaker, you may contact with local distributor for assistance. Symptom Solution Bluetooth indication LED not on Please make sure your Bluetooth Light Speaker has been powered on. Try to short press audio Bluetooth power button on phone control interface. Speaker does not produce sound Please make sure your Bluetooth Light Speaker has been powered on.
PAGE 5
Sound distortion WAV and MID files are often poor quality. Therefore distortion and noise are easily noticed with powered speakers. Check the volume level and decrease if necessary. “LS10BT APP” application can not run well on Please make sure phone has iOS system 7.0 phone or higher version (or with Android system 4.3 or higher version). Some functions on control interface may not be supported on some smart phones.