COMPROD COMMUNICATIONS LTD. Customer Instruction Manual Model #BDA-896940 900 MHz BIDIRECTIONAL AMPLIFIER Technical manual 2015, Comprod Communications LTD. 88 Industriel Blvd Boucherville, QC, J4B 2X2 Phone 1.800.641.1454 • Fax 1.800.641.4616 3405 N. Benzing Road Orchard Park, NY, USA 14127 Phone 1.800.603.1454 • Fax 1.800.554.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L IMPORTANT: The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Subpart B – Unintentional Radiators. Final product must comply with unintentional radiators before declaring compliance of their final product to Part 15 of the FCC Rules and Industry Canada ICES-003.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L Based on the philosophy of Anytime, Anywhere, and Anyplace, the 896-940 MHz amplifier module is designed for ease of use to be adaptable to various needs in the field. Recently developed technologies are applied. With the use of modern integrated circuits and RF components, the Comprod design ensures constant performance and a reliable amplifier unit.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L Block Diagram Details - The 900 MHz Amplifier module contains a (Low Noise Amplifier) LNA designed to detect a very weak signal. This stage is bypassed if the signal level at the input is higher than -20dBm - The LNA is followed by an Automatic Gain Control (AGC).
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R AGC ATT Clk,Data,En Donor Antenna (Base) MGC ATT 10,20,.. T E C H N I C A L M A N U A L MGC ATT 1,2,3,.. LNA DAS Service Antenna (Mobile) HPA Det Sub B’d Card Power Supply (PSU) DC AC Det Down Link Path Monitoring & Control Unit LED Alarms MGC USB (Optional) RS 232 DPLX DPLX Det UP Link Path LNA HPA 1,2,3,.. MGC ATT 10,20, Clk,Data,En ..
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L Monitoring and Control The monitoring and control function is possible by connecting the BDA through a serial RS232 connector. A Serial to USB cable is available under request. The software designed for this purpose is provided (ver 1.02). This software should be installed on a computer with Windows, XP,Vista,7, 8 or 10 versions. When you run the software you will see the screen shown below.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L 4) Downlink / Uplink AGC Attenuation. Automatic attenuation delivered by the AGC to maintain the output level constant. When this value shows “0” it is because the input power is lower than -53 dBm. If it is zero in the Downlink path the AGC alarm will turn red. 5) DC voltage / current monitor. It shows the DC voltage and current to the RF unit. 6) System temp. Shows the current system temperature. 4.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L Unpacking 1) If the shipping box is damaged, do not open it, take a picture and contact the freight carrier for a claim. 2) If the shipping box is not damaged, the 900 MHz BDA should be unpacked soon after delivery and carefully inspected for possible shipping damage.
0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L BDA INSTALLATION DO NOT APPLY A.C. POWER TO THE BDA UNTIL CABLES ARE CONNECTED TO BOTH PORTS OF THE BDA AND THE ANTENNAS. 1. Mount the BDA on the wall with the RF connectors pointing DOWN. Using appropriate screws and anchors, attach the BDA to the wall at the four mounting holes on the side flanges. 2.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L LabelingInstruction Figure 4: 900 MHz Bidirectional Amplifier 10 M A N U A L
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L Figure 5: Label position on the BDA The amplifier unit has its FCC/IC, warning and Signal Booster Class B labels on the front cover, as shown in the above picture. These labels must not be removed.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L If the amplifier unit is installed in a host device where this label is not visible, then the host device should have a visible label with the following text: BDA896940: Contains FCC ID: WDM-BDA896940 Model: BDA896940 IC: 7755A-BDA896940 HVIN: BDA896940 FVIN: BDA RF GUI V1.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L Figure 6:Additional Labels on the BDA.
9 0 0 M H Z B I D I R E C T I O N A L A M P L I F I E R T E C H N I C A L M A N U A L Warnings and Notices WARNING: Changes or modifications not expressly approved by Comprod Communications could void the user’s authority to operate the equipment WARNING: To satisfy RF exposure requirement FCC: The RF exposure safe separation distance is 20cm IC: The RF exposure safe separation distance is 20cm Notice: This equipment has been tested and found to comply with the limits for a Class A digital device, pu