USER MANUAL ZIPK8WN2 (N8JWN&O2WK1N) 1
USER MANUAL Contents Chapter 1 Safety Instructions...........................................................................4 Chapter 2 Product Overview ............................................................................6 2.1 Rear Panel .................................................................................................6 2.2 Remote Control (For Reference Only)........................................................7 Chapter 3 WIRELESS NVR Common Operations ...........................
USER MANUAL 5.1.5 Alarm ..................................................................................................28 5.1.6 Video Cover .......................................................................................30 5.2 Record......................................................................................................31 5.2.1 Record ...............................................................................................31 5.2.2 Record Schedule................................
USER MANUAL 6.1.2 Event Search, Playback & Backup .....................................................68 6.1.3 Sub-periods Playback ........................................................................71 6.1.4 Picture Search & View........................................................................72 6.1.5 Picture Preview Control ......................................................................73 Chapter 7 Remote Access via Web Client .....................................................74 7.
USER MANUAL Chapter 1 Safety Instructions Please carefully read the following safety instructions so as to avoid personal injuries and prevent the equipment and other connected devices from being damaged. 1. Power sources (note: please use the power supply attached or included in the box) Never operate the equipment by using an unspecified power supply. 2.
USER MANUAL both sides and the rear) during operation. Install or put the equipment in a place with good ventilation. 10. The included power adapter can only be used for 1 WIRELESS NVR unit. Do not try to connect more equipment, or your WIRELESS NVR may restart repeatedly because of insufficient power. 11. Prevent the equipment from water splash or drip. Do not place objects containing water, such as a flower vase, on the equipment. 12.
Chapter 2 Product Overview 2.1 Rear Panel # Physical interface Connection 1 Ground connection A terminal to connect a separate ground cable. * Make sure to add a ground cable in order to use the equipment safely. 2 Antenna Receive signals from wireless cameras. 3 HDMI Connect with HDMI display devices such as a PC monitor. 4 WAN:(RJ45) Network port Connect with WAN via an Ethernet cable.
USER MANUAL 2.2 Remote Control (For Reference Only) 1 2 3 4 5 6 7 8 9 9 10 11 14 16 Table 2-1 12 13 15 No.
USER MANUAL Chapter 3 WIRELESS NVR Common Operations 3.1 Using the Supplied Mouse Left Button of Mouse Right Button of Mouse Click once to choose an item in the menus and confirm your selection. Click once to open the pop-up menu on the Live View screen and to exit from the menus. Click once upon a channel on Live Viewing screen to open Camera Quick Toolbar Double-click on the channel on the exit from the menus. Live Viewing screen to view the channel in full screen mode.
USER MANUAL 3.3 Password When you run the WIRELESS NVR for the first time, you are required to set your own password immediately to protect your privacy. Please be sure to note your username and password and save them in a secure place. Language: Choose an OSD language Device ID: Input the device ID in the parentheses. Default ID is 000000. View more about Device ID at 5.6.1 General. New Admin name: To set your own administrator name. New Admin Password: To set your own password.
USER MANUAL Click Apply to confirm your settings and you’ll then go to the login interface. Draw an unlock pattern or Enter your user name & password to Login the WIRELESS NVR system. NOTE: If you forget your password, you will be unable to login the system, please contact your reseller to reset the password.
USER MANUAL Chapter 4 WIRELESS NVR Start up 4.1 Startup Wizard Startup Wizard will help to configure the system and get the WIRELESS NVR working quickly. 4.1.
USER MANUAL 4.1.2 Network Configuration If you connect to a router that allows the use of DHCP, please check the DHCP box. The router will automatically assign all the network parameters for your WIRELESS NVR. Below are the parameters to complete if the network does not use DHCP: IP Address: The IP address identifies the WIRELESS NVR on the network. It consists of four groups of numbers between 0 to 255, separated by periods. For example, “192.168.1.100”.
USER MANUAL Port Web Port: This is the port that you will use to log in remotely to the WIRELESS NVR (e.g. using the Web Client). If the default port 80 is already taken by other applications, please change it. Client Port: This is the port that the WIRELESS NVR will use to send information (e.g. using the mobile app). If the default port 9000 is already taken by other applications, please change it.
USER MANUAL Time Format: Choose time format between 24Hour and 12Hour. Time Zone: Set the correct time zone. NTP NTP stands for Network Time Protocol. This feature allows you to synchronize the date and time automatically on the WIRELESS NVR over the Internet. For this to work, the WIRELESS NVR needs to be connected to the Internet. Check the “NTP” box, and select the NTP server. DST DST stands for Daylight Savings Time.
USER MANUAL 4.1.4 Disk If a HDD is installed in the WIRELESS NVR for the first time, it must be formatted. Select the HDD and then click Format HDD button to format the HDD. Overwrite: Use this option to overwrite the old recordings on the HDD when the HDD is full. For example, if you choose the option 7 days then only the last 7 days recordings are kept on the HDD. To prevent overwriting any old recordings, select Disable.
USER MANUAL 4.1.5 Resolution Choose an output resolution to match your monitor. The WIRELESS NVR supports adjusting the output resolution automatically to match the best resolution of your monitor when the system is starting up. 4.1.6 Mobile If your WIRELESS NVR comes with a P2P ID, you can scan the QR code with your mobile app to view the WIRELESS NVR remotely.
USER MANUAL 4.1.7 Summary You can check the system summary information you had set in the start wizard and finish the wizard. Check “Don't show this window next time" if you don’t want to display the Start Wizard the next time the system reboots. Click Finish to save & exit.
USER MANUAL 4.2 Live View Screen Status Icons Status Icons Camera Quick Toolbar Pop-up Menu Bar System Date & Time Task Menu Bar Status Icons This indicates that the WIRELESS NVR is currently recording. This icon appears when the camera has detected motion. Click to enter pairing.
USER MANUAL 4.2.1 Camera Quick Toolbar In live view, click the left button of your mouse on a connected camera to display the Camera’s Quick Toolbar. Click to manually record the channel immediately. If manual recording is in process, the icon will be red. Click one more time to stop manual record. Click to save a snapshot of the current camera image. Manual Capture must be enabled to use this feature. For details on enabling Manual Capture, see 5.2.3.1 Capture.
USER MANUAL This icon will appear if the network is disconnected. To start or stop Manual Record . To view system information, and network state. 4.2.3 Start Menu With the start menu, you can switch user, search & playback, enter system setup menu, lock & unlock the screen, shut down, reboot & logout the system. To switch user. To enable multi-user, please view on 5.6.3 Multi-user. Search & Playback. View more on Chapter 6 Search, Playback & Backup NVR System Setup.
USER MANUAL Click the Shutdown button from Start Menu, and the select the further action. Click the OK button, and the system will require you to input the Admin password to authenticate. If you choose to Logout of the system, the live view screen will disappear. You will need to login to the system for further operations.
USER MANUAL 5. Chapter 5 WIRELESS NVR System Setup You are able to configure the WIRELESS NVR for Channel, Record, Alarm, Network, Device & System from Start Menu Setup.
USER MANUAL 5.1 Channel In this section, you are allowed to configure the wireless cameras, live view display, manage Wireless cameras, motion setup, and Video Cover. 5.1.1 Channel Region: NA/UK/MKK depending on the region. Wireless Band selection: Auto or Manual optional. Auto is recommended. Wireless Channel: Wireless Channel. Camera version: Camera firmware Version. Pair: Click the channel button to do pairing.
USER MANUAL 5.1.2. Live To configure camera parameters. Channel: Display channel number. icon into the setup page.
USER MANUAL Choose a channel to configure Give a name to the camera Date format to display for the Wireless camera Time format to display for the Wireless camera Display signal strength Adjust the Hue value for the image color Adjust the Bright value for the image color Adjust the Contrast value for the image color Adjust the Saturation value for the image color Click Default to load default settings, click Apply to save settings, click right buttons of your mouse to exit.
USER MANUAL 5.1.3 Motion This menu allows you to configure motion parameters. When motion has been detected by one or more cameras, your WIRELESS NVR will alert you to a potential threat at your home. It does this by sending you an email alert with an attached image from the camera to use as a reference (if this option is enabled) and/or sending push notifications via the mobile app. Setup: Click icon into the setup page. Switch: Enable or disable motion detection.
USER MANUAL 5.1.4 PIR Setup: Click icon into the setup page. Switch: Enable or disable motion detection. Sensitivity: Set the sensitivity level. Level 1 is the lowest sensitivity level while level 8 is the highest sensitivity level. 27 Motion Detection Area: The whole screen is marked for motion detection (red blocks) as default.
USER MANUAL 5.1.5 Alarm Click Alarm button to configure the motion detection alarm function: Channel: Display channel number. Buzzer: The WIRELESS NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration in seconds when the motion is detected. icon and choose which channel(s) you want to record when the motion Record: Click detection is triggered. Post Recording: You can set how long after an event occurs that the WIRELESS NVR will continue to record.
