User's Manual

ManualsBrandsComponents Specialties ManualsElectronicsWireless Network Video Recorder

USER MANUAL

5.6.2.1 LIVE-OUT

Choose

LIVE-OUT

from the Video Output drop-down menu.

SEQ Mode

: Select how many video channels you would like to display when your WIRELESS

NVR is in sequence mode.

SEQ Dwell Time:

Enter in seconds the maximum length of time you would like to display a video

channel in sequence mode before displaying the next video channel (300 seconds is the

maximum).

Output Resolution

: Select a display resolution that is suitable for your TV. 1920 x 1080 will suit

most TVs. If your WIRELESS NVR supports 4K output resolution, you can select either 2K (2560 x

1440) or 4K (3840 x 2160) to take advantage of the higher resolution that your 4K TV provides.

Scale and Offset

: The WIRELESS NVR supports to adjust the size & position of the display

screen to match your monitor or TV. Click

Setup

button to adjust.

Click once or hold the left button of your mouse on the arrow to adjust the size and position, or you

can scroll the wheel of the mouse to adjust. Click the right button of your mouse to exit, and click

Apply

to save your modifications.

Cursor Hidden Delay

: Click the drop-down menu to select the time your WIRELESS NVR will

hide the mouse cursor when idle. You can also disable this by selecting “OFF” (password

protection will be temporarily disabled).

Cursor Acceleration

: To adjust the speed to move the mouse cursor.

Transparency

: Click and hold the slider left or right to change how transparent the Menu Bar and

Main Menu will appear on-screen. Adjust accordingly.

Scale: To adjust the size of the displayed

screen by scale.

X Offset: To move the displayed screen to left

or right.

Y Offset: To move the displayed screen to up or

down.

Summary of content (18 pages)

PAGE 1
USER MANUAL 5.6.2.1 LIVE-OUT Choose LIVE-OUT from the Video Output drop-down menu. SEQ Mode: Select how many video channels you would like to display when your WIRELESS NVR is in sequence mode. SEQ Dwell Time: Enter in seconds the maximum length of time you would like to display a video channel in sequence mode before displaying the next video channel (300 seconds is the maximum). Output Resolution: Select a display resolution that is suitable for your TV. 1920 x 1080 will suit most TVs.
PAGE 2
USER MANUAL 5.6.3 Multi-user This menu allows you to configure the user name, password and user permission. The system supports the following account types: ADMIN — System Administrator: The administrator has full control of the system, and can change both administrator and user passwords and enable/disable password protection. USER — Normal User: Users only have access to live viewing, search, playback, and other functions.
PAGE 3
USER MANUAL Password Enable: It’s strongly recommended to enable the password to protect your privacy. If you want to disable the password protection, please ensure your WIRELESS NVR is placed in a secure place. 5.6.3.
PAGE 4
USER MANUAL 1. Select one of the user accounts that is currently disabled, click the User Edit icon 2. 3. 4. 5. 6. 7. Select Enable from the drop-down next to User Enable. Click the field next to User Name to change the user name for the account. Select Enable from the drop-down next to Password Enable. Click the field next to Password to enter the desired password. Click the field next to Confirm to reenter the password. Click Save. You will be required to input your Admin password to authenticate.
PAGE 5
USER MANUAL 5.6.3.3 Setting User Permissions The administrator account is the only account that has full control of all system functions. You can enable or disable access to certain menus and functions of each user account. 1. Click the edit icon under Permission tab.
PAGE 6
USER MANUAL 2. Check the boxes next to any system menus or capabilities you would like the user to access. Click All to check all boxes. Click Clear to check none of the boxes. 3. Click Save to save your modifications. 5.6.4 Maintenance In this section, you will be able to search & view the system log, load default settings, upgrade the system, export & import system parameters and manager system auto reboot.
PAGE 7
USER MANUAL 5.6.4.1 Log The system log shows you important system events, such as motion alarms and system warnings. You can easily create a backup file of the system log for a set time period to a USB flash drive. Log Searching and Backing Up: 1. Click the field next to Start Date & Start Time to choose the starting date & time for your search from the on-screen calendar. 2. Click the field next to End Date & End Time to choose the end date & time for your search from the on-screen calendar. 3.
PAGE 8
USER MANUAL 5.6.4.2 Load Default Reset the WIRELESS NVR settings to its out-of-box state. You can choose to reset all settings at once, or just settings on specific menus. Restoring default settings will not delete recordings and snapshots saved to the hard drive. Check the items you want restore, or check Select All to choose all items. Click Apply to load default settings of your chosen items. 5.6.4.
PAGE 9
USER MANUAL 1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the WIRELESS NVR’s USB port. 2. Click Select File button to choose the firmware file in your USB flash drive, then Click OK. 3. Click Upgrade button to start system upgrade. The system upgrade will last around 5-10 minutes, please do NOT power off the WIRELESS NVR or remove the USB from WIRELESS NVR during firmware upgrade. 5.6.4.
PAGE 10
USER MANUAL 5.6.4.5 Auto Reboot This menu allows the system to auto reboot the WIRELESS NVR regularly. It is recommended to leave this function enabled, as it maintains the operational integrity of your WIRELESS NVR. Auto Reboot: Check to enable. Time: You can set the WIRELESS NVR to reboot by day, week or month.
PAGE 11
USER MANUAL 5.6.5 IP Camera Maintain This menu allows you to upgrade the IP camera’s firmware and restore default settings of IP camera. 5.6.5.1 Upgrade IP Camera 1. Choose one of the IP cameras on which you want to upgrade firmware. 2. Click Select File select the update file from your USB flash drive, then click OK. 3. Click IPC Upgrade button to start upgrading. You will be required to input the Admin password to authenticate.
PAGE 12
USER MANUAL 5.6.5.2 Load Default Settings for IP Camera 1. Choose the IP cameras you want to restore. 2. Click Load Default to restore settings. You will be required to input the Admin password to authenticate. 5.6.6 System Information This menu allows you to view the system information, channel information, record information & network status. 5.6.6.1 Information View system information such as device ID, device model name, IP address, MAC address, firmware version and more.
PAGE 13
USER MANUAL If your WIRELESS NVR supports P2P function, you will find the P2P ID & P2P QR code in the information page. You can scan this QR code with a mobile app to remotely view the WIRELESS NVR. 5.6.6.2 Network State View network information.
PAGE 14
USER MANUAL Chapter 6 Search, Playback & Backup The Search function gives you the ability to search for and play previously recorded videos as well as snapshots that are stored on your WIRELESS NVR’s hard drive. You have the choice of playing video that matches your recording schedule, manual recordings or motion events only. The Backup function gives you the ability to save important events (both video and snapshots) to a USB flash drive. 6.
PAGE 15
USER MANUAL 5. Video Playback Controls: to control the video playback. Enlarge the video playback to full screen Rewind, x2, x4, x8 and x16 Slow Play, 1/2, 1/4 and 1/8, 1/16 speed Play Pause Play frame by frame. Click once to play a frame of the video Stop Fast Forward, x2, x4, x8 and x16 Digital Zoom: Click to zoom in then click-and-drag on a camera image during playback to zoom in on the selected area. Right-click to return to regular playback. Video Clip.
PAGE 16
USER MANUAL 8. Different types of recording shown in different colors: Continuous Recording in Green; Motion Recording in Yellow; PIR Recording in Purple; Alarm Recording in Orange 6.1.1 Search & Play Video in General This menu gives an option to search & play recordings for a selected date. 1. 2. 3. 4. 5. 6. Select a date to search for video recordings from the calendar. Choose a search type. Check channels you would like to search, or check Channel to search all connected channels.
PAGE 17
USER MANUAL 8. If you want to quickly save a section of video during playing back to a USB flash drive, use the Video Clip backup function. 6.1.1.1 Video Clip Backup 1. Insert your USB flash drive to the WIRELESS NVR. 2. Start a video recording playback. 3. Click icon. 4. Check the channel(s) you want to make a video clip backup of. 5. Move the mouse cursor to the timeline where you want to start the video clip. 6.
PAGE 18
USER MANUAL 9. Next, The backup drive menu appears. Navigate to the folder you want to save the backup files in. 10. Click OK to begin. The progress bar at the bottom of the window shows you the progress of the backup.