Citrix SD-WAN 110-WiFi-SE Quick Start Guide Citrix SD-WAN Quick Start Guide: 110 WiFi Standard Edition (SE) 1
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Copyright and Trademark Notice Copyright © 2018 Citrix Systems, Inc. All rights reserved. NO PART OF THIS DOCUMENT MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS OR USED TO MAKE DERIVATIVE WORK (SUCH AS TRANSLATION, TRANSFORMATION, OR ADAPTATION) WITHOUT THE EXPRESS WRITTEN PERMISSION OF CITRIX SYSTEMS, INC.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Contents Contents ........................................................................................................................................................ 3 Quick installation and configuration ............................................................................................................. 4 Before you begin ................................................................................................................................
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Quick installation and configuration Review the following information before proceeding with installation of the SDWAN 110-WiFi-SE appliance. Before you begin Verify that the following components and accessories are included: Citrix SD-WAN 110-WiFi-SE appliance. Accessory contents: • • • • Power adapter - 1 Power cable - 1 Rubber feet ( Desktop mount) – 4 Wall mount screws - 2 Optionally, you can also purchase the rack mount shelf.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Citrix SD-WAN 110-WiFi-SE The Citrix SD-WAN 110-WiFi-SE platform is a branch side appliance that can be deployed in micro and small branch offices/Remote sites/ retail stores, and temporary worksites. It is a single box in branch solution that helps to reduce hardware foot print and eases branch deployment. The Citrix SD-WAN 110-WiFi-SE appliance is a desktop form factor appliance.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Figure 2. Citrix SD-WAN 110-WiFi-SE back panel Note: Port 1/1 is the default LAN port and port 1/2 is the default WAN port. Port 1/3 is disabled. The default LAN IP is 192.168.0.1. The WAN port is configured as a DHCP client. Port Label Type Description 1/1, 1/2 and 1/3 1/4 USB Serial Power Traffic Management port 2 USB ports RS-232 serial Power button Network traffic Use standard mgmt. port description USB ports An RS232 serial console port.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide 7
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Appliance physical installation procedure and precautions • Horizontal or vertical mount • • Install the equipment near an electrical outlet for easy access. Place equipment in a rack with sufficient airflow for safe operation. • For a closed or multiple-unit rack assembly, the ambient operating temperature of the rack environment might be greater than the ambient temperature of the room.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Ensure that the power supply cords include grounding plugs and are plugged into grounded electrical outlets. Ensure that the power source can handle the appliance's maximum power consumption rating with no danger of an overload. A reliable ground must be maintained at all times. Therefore, the rack should be grounded.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Rack mount the appliance 1. Fix the shelf to the rack with the provided screws. 2. Install the chassis. Place the appliance screw slots on the positioning screws on the shelf and slide it, to lock it into position. 3. Install the chassis fix bracket to hold the appliance in position. Place the chassis fix bracket on the slot and fix it with a screw.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide 4. Install the power adapter. Place the power adapter on the adapter slot. 5. Install the adapter fix bracket to hold the power adapter in position. Place the adapter fix bracket on the slot and fix it with a screw.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Connect the power cable to one of the inlet receptacles on the back of the appliance, and connect the other end of the power cable to a power outlet. Connecting the appliance to the network Connect the interfaces on the appliance to the network ports on the appropriate switches by using Ethernet/fiber optic cables. Note: Citrix SD-WAN 11.1 supports day-0 provisioning and day-n management of the appliance through both management and data ports.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide To configure the management IP address for a hardware SD-WAN appliance, do the following: Note You must repeat the following process for each hardware appliance you want to add to your network. 1. If you are configuring a hardware SD-WAN appliance, physically connect the appliance to a PC. • If you have not already done so, connect one end of an Ethernet cable to the Management Port on the appliance, and the other end to the default Ethernet port on the PC.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide This opens the SD-WAN management web interface login screen on the connected appliance. 6. Enter the administrator user name and password, and click Login. After you have logged into the management web interface, the Dashboard page appears. • Default administrator user name: admin • Default administrator password: password Note: From Citrix SD-WAN 11.0.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide System specifications The following table summarizes hardware specifications for the Citrix SD-WAN 110-WiFiSE platform edition. Specifications Regulatory model number Memory Non-Volatile Storage WiFi LAN Ports USB 2.0 Power supplies External power supply ratings Appliance ratings 110-WiFi-SE SD-WAN 110-WiFi 4GB 32GB Dual band 2.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Frequency bands (GHz) Channel width: 20 MHz Channel width: 40 MHz Channel width: 80 MHz Maximum output power Max simultaneous SSID’s 2412 MHz, 2417 MHz, 2422 MHz, 2427 MHz, 2432 MHz, 2437 MHz, 2442 MHz, 2447 MHz, 2452 MHz, 2457 MHz, 2462 MHz 5180 MHz, 5200 MHz, 5220 MHz, 5240 MHz, 5745 MHz, 5765 MHz, 5785 MHz, 5805 MHz, 5825 MHz 5190 MHz, 5230 MHz, 5755 MHz, 5795 MHz 5210 MHz, 5775 MHz 27.70 dBm for 2412 ~ 2462 MHz 21.71 dBm for 5180 ~ 5240 MHz 24.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Compliance Responsible Party – U.S. Contact Information: Citrix Systems, Inc. 4988 Great America Parkway Santa Clara, CA 95054 USA compliance.prime@citrix.com This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: 1. l'appareil ne doit pas produire de brouillage, et 2.
Citrix SD-WAN 110-WiFi-SE Quick Start Guide Additional information For information about other Citrix SD-WAN platform editions, see Citrix SD-WAN Platforms. To contact Citrix Support, call 1-800-4-CITRIX (1-800-424-8749), or log on to My Citrix at http://www.citrix.com. You will be asked for your hardware serial number as part of the support process. Detailed instructions for contacting support can be found at: https://www.citrix.com/contact/technical-support.html.