User's Manual

ManualsBrandsCompex Systems ManualsComputers & AccessoriesWIRELESS-A/N 23DBM NETWORK MINI PCI ADAPTER WITH ESD

Table Of Contents

Features

•

Atheros XSPAN family chipset

•

5GHz IEEE 802.11n compliant and backward compatible with 802.11a

•

5GHz Single-band MIMO 2x2 spatial multiplexing technique

•

Maximum 20.0dBm output (per chain)/23.0dBm aggregate for 5.7G

Maximum 23.5dBm output (per chain)/26.5dBm aggregate for 5.8G.

•

Built-in ESD Protection with ESD/EMP Immunity Threshold: 15KeV

①

•

Supports up to 300Mbps physical data rates

•

Delivers 10 times the throughput and nearly twice the range of legacy 802.11a network

•

Transmission Power Control (IEEE 802.11h TPC)

•

Dynamic Frequency Selection (DFS)

•

Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard)

•

2 x MMCX or 2 x U.FL Antenna Connectors

②

2 x 2 802.11N MIMO mini-PCI Modules

Radio module

WLM200N5-23 ESD MINIPCI

Single-Band 5GHz 802.11n MIMO 2 x 2 miniPCI

Summary of content (5 pages)

PAGE 1
Radio module 2 x 2 802.11N MIMO mini-PCI Modules WLM200N5-23 ESD MINIPCI Single-Band 5GHz 802.11n MIMO 2 x 2 miniPCI Features • • • • Atheros XSPAN family chipset 5GHz IEEE 802.11n compliant and backward compatible with 802.11a 5GHz Single-band MIMO 2x2 spatial multiplexing technique Maximum 20.0dBm output (per chain)/23.0dBm aggregate for 5.7G Maximum 23.5dBm output (per chain)/26.5dBm aggregate for 5.8G.
PAGE 2
Technical Specifications Chipset Host Interface Operating Voltage Atheros AR9220 PCI Interface v2.3 (Type III-A Mini PCI form factor) 3.3 VDC Power Consumption 11a Cont. Tx @6M 11na Cont. Tx@HT20 MCS0 11na Cont. Tx@HT40 MCS0 11a Cont. Rx Standby Antenna Connector 2 x MMCX or 2 x U.FL IEEE 802.11a : Data Rate IEEE 802.11n : Frequency Range IEEE 802.11a/n: Modulation Techniques Radio & EMC Certification RoHS Compliance Temperature Range Humidity Dimension 3.5W 3W 3W 0.9W 0.
PAGE 3
Compliance Information FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID.
PAGE 4
(4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. (5) Outdoor Operations in the 5.15~5.25GHz band is prohibited. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product.
PAGE 5
WLM SERIES MINIPCI b / g (2.4GHz) MODEL a / b / g (2.