User's Manual

ManualsBrandsCompex Systems ManualsComputers & AccessoriesWIRELESS-AG NETWORK MINI-PCI ADAPTER

Quick Install Guide

Compex

Wireless-AG

Mini PCI Adapter

WLM54AG

Version 1.1

1. Introduction

This mini PCI adapter, Compex WLM54AG contains a dual-mode

single chip MAC/BB/Radio for IEEE 802.11a, 11g and 11b Wireless

LAN. It can support high-speed data transmission of up to 54Mbps in

the 2.4GHz and 5GHz frequency bands based on 802.11b/g and

802.11a mode respectively.

Based on the latest industry standard Wi-Fi Certified IEEE

802.11a/b/g specification, the Compex WLM54AG offers maximum

channel speeds of up to 54 Mbps. It supports key security features

like Wi-Fi Protected Access (WPA), WPA2, WEP and 802.1x.

You can find this adapter that is seated inside the wireless products

such as the WPE54AG. WLM54AG can be removed from or inserted

onto the PCBA of the WPE54AG.

2. Package Content

Compex WPE54AG retail package contains the following items:

• 1 x Compex WPE54AG

• 1 x External Power Adapter

• 1 x 3dBi SMA Antenna

• 1 x Base Stand

• 1 x RJ45 MDIX cross-over Ethernet cable

• 1 x Quick Install Guide with Warranty Registration Form

• 1 x Product CD (including Quick Install Guide, User’s Manual,

Firmware Recovery Tool & Utilities)

3. Hardware Installation

1. Connect one end of the RJ45 crossover Ethernet cable to your

PC and another end to the Ethernet port of your Compex

WPE54AG.

2. Next, attach the power adapter supplied in the packaging to the

power point.

3. Connect the power plug onto the socket on your Compex

WPE54AG.

4. Power ON your Compex WPE54AG and your PC. Notice that

the LAN Link/ACT and Power LEDs have lighted up. This

indicates that the connection has established successfully

between your Compex WPE54AG and your PC.

NETPASSAGE

Power Point

RJ45

Ethernet cable

Compex

WPE54AG

Summary of content (4 pages)

PAGE 1
NETPASSAGE 1. Quick Install Guide Introduction Compex Wireless-AG Mini PCI Adapter WLM54AG This mini PCI adapter, Compex WLM54AG contains a dual-mode single chip MAC/BB/Radio for IEEE 802.11a, 11g and 11b Wireless LAN. It can support high-speed data transmission of up to 54Mbps in the 2.4GHz and 5GHz frequency bands based on 802.11b/g and 802.11a mode respectively. Version 1.1 Based on the latest industry standard Wi-Fi Certified IEEE 802.
PAGE 2
4. Access to Web-based Interface Now, your Compex WPE54AG acts as a DHCP Server which can assign IP address to your PC/clients. Compex has developed a powerful uConfig utility which provides you hassle-free access to the web-based configuration page. To do so, simply 6. WLAN Basic Setup for Compex WPE54AG 1. Insert your Product CD into your CD-ROM drive. Go to Utilities section and select uConfig to run the program. 1. 2. The following screen shot will appear.
PAGE 3
4. Select the radio buttons for Obtain an IP address automatically and Obtain DNS server address automatically. Click OK button to update the changes. Next, you may set up Windows XP’s Wireless Network Connection as follows: 5. 6. Right click on Wireless Network Connection corresponding to the Wireless Ethernet Adapter you wish to connect to your Compex WPE54AG, and click on Properties. Go to Wireless Networks tab and click on Add.. button. 7.
PAGE 4
8. Panel Views and Descriptions Disclaimer: Compex, Inc. provides this guide without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and fitness for a particular purpose. Compex, Inc. may make improvements and/or changes to the product and/or specifications of the product described in this guide, without prior notice. Compex, Inc will not be liable for any technical inaccuracies or typographical errors found in this guide.