User Manual Product Model: SKC-2S Comper Chuangxiang(Beijing)Technology Co., Ltd Please read the manual before use to ensure proper use and safe and reliable operation of the product.
Table of contents Product Introduction ....................................................................................................................... 1 Get to know your Comper SkinEnergy ............................................................................. 1 Intended use .............................................................................................................................. 1 Package Contents .............................................................................
Product Introduction Get to know your Comper SkinEnergy Comper SkinEnergy is a multi-functional smart facial toning device intended for cosmetic use. The technology combines LED light therapy, MENS (microcurrent treatments), HEAT therapy and vibration massage functions that results better antiaging and face-lifting performance due to their high-efficiency collaboration. Within adjustable mode and intensity, this device is capable of providing complete facial care in personalized comfort.
The infrared and green light: Emits energy in the near-IR spectrum and green light for temporarily promoting relaxation of muscle tissue; and to temporarily increase local blood circulation where heat is indicated. Package Contents Upon opening the Comper SkinEnergy package, you will find the following: ● Comper SkinEnergy Device ● Charging Cable ● User Manual ● Quick Guide ● Storage Bag Safety Warning Contraindications ● DO NOT USE if you have a history of epilepsy or seizures.
lesion — consult your doctor. ● DO NOT USE if you have open sores or wounds. ● DO NOT USE if you have prone to rosacea. ● DO NOT USE if you have problematic or sensitive skin. ● DO NOT USE if you are pregnant. ● DO NOT USE on infants and children under the age of 18, and keep device and attachments out of the reach of children. ● DO NOT USE on persons incapable of expressing their thoughts or intentions. ● DO NOT USE if you have metal braces.
wound can't be operated as well except of LED which boots the wound to heal faster. ● The safety of technologies about heat, microcurrent and LED using for pregnant or postpartum woman have not been proven. ● There may be a perception of flashing lights during the use of your Comper SkinEnergy, resulting from the stimulation of your optic nerve. If you notice this condition constantly without the use of your Comper SkinEnergy, consult your doctor.
Do not attempt to modify, open or repair your Comper SkinEnergy device. You may expose yourself to dangerous electrical components and may cause serious harm to yourself. Avoid contact between the electrodes and metal surfaces, as it may result in a failure of the device and injury. Do not use the device on pets as it may result in an injury.
Mode Indicator Each time you press the Power/Mode button, the treatment mode will be switched in the following order. Note: The vibration function is on in each mode by default, you can turn off or turn on the vibration function by long pressing button. Level Indicator Short press button to adjust the HEAT and EMS levels and select the intensity level which you feel the most comfortable. LED and MASS (vibration) intensity level cannot be selected.
turned from yellow to green color, indicating a full charge. Charging Time Charge time Operating time Approx. 4 hours Approx. 3.5 hours The time indicated above is when the device is charged at an ambient temperature of around 25℃. Charging time and operating time may vary depending on the operating Mode, operating level, and/or operating environment. Actual charging time will differ depending upon the remaining battery and the charging environment.
Specifications Product Name SkinEnergy Model SKC-2S Operating Temperature: 10℃~35℃ environment Humidity: 10%~90% Transportation and Temperature: -10℃~55℃ storage conditions Humidity: 10%~90% Power supply DC 5V Dimensions H102 x W56 x D28mm/ H4.02 x W2.02”x D1.10” Weight 0.115kg/0.254lbs Battery Capacity 2800mAh, output voltage 3.7v, Protecting rating IP22 Applied part Type BF 1. Classification according to the type of protection against electric shock: Internally powered equipment; 2.
* To protect your skin, a temperature sensor is embedded in the treatment tip of the Comper SkinEnergy. This sensor ensures the skin’s surface will not exceed 42 ℃/ 107.6℉. Accessories HA Essence (not included) Rub the HA Essence on the electrodes of SkinEnergy before starting the treatments. This product can offer your skin with sufficient water and help the SkinEnergy achieve better effect. How to use Before using SkinEnergy 1.
2. Long press the ON/OFF button to turn on the SkinEnergy. if the light is yellow, it indicates that your device needs charging, please charge your device before use. Battery Indicator Light Color Device Status The battery is enough and the The green light is always on During Use device can work properly. The color changes to yellow or alternates between yellow The battery is low. and green. The device will shut down The yellow light is flashing after 8s. During Charging • The light stays yellow.
Caution Please do not use the MENS (micro-current treatments) function for the upper eye area. The stimulation of MENS may feel different depending upon the condition of your skin and types of cosmetics used together. Do not look directly into the LED light when using the device. Treatment Steps 1. Remove all jewelry. 2. Remove makeup and gently clean your face. 3. Rub the HA Essence (or analogous hyaluronic acid product, but Comper is not responsible for any possible problems.
add more in following process. 4. Longa press the ON/OFF button to turn on the device, then press and release ON/OFF button to start your skincare process. 5. Keep continuous movement covering your treatment areas which are illustrated at "Treatment area" section above. Make sure the treatment surface is in good contact with your skin.
6. The function indicators will indicate the automatic function alteration during the operation, while you can also manually skip the function to the next one by pressing the Power/Mode button. 7. “HEAT”and “MENS”have three different intensity levels. Adjust the intensity level to your comfort by pressing the Button on the right side of your device. 8.
10. After the treatment, condition your skin as necessary. Maintenance and Storage Cleaning procedure 1. Turn off the device by pressing the ON/OFF button. 2. Allow cooling down of its Treatment Surface. 3. Use a damp soft, lint-free cloth and water or rubbing alcohol to clean the device, please do not use alcohol to clean the electrodes. 4. Wipe the device with a dry cotton fabric or dry it in the air after cleaning. Caution Do not immerse the device into water.
Do not discard Comper SkinEnergy with the normal household waste. Dispose of it at an official recycling collection point. Please call your local recycling depot for locations and proper recycling instructions. Troubleshooting Do not attempt to open or repair your Comper SkinEnergy. You may exposure yourself to dangerous electrical components and cause serious harm to yourself. It will also void the warranty. Problem Possible Cause Solution My SkinEnergy does not start.
quickly. My SkinEnergy doesn’t charge. The The outlet in your home Try a different outlet. isn’t working. treatment sensation greatly changed. You accidentally released Check the setting of the intensity the Intensity Level button level indicator on the front of the too quickly. device, change the level if necessary.
of Comper SkinEnergy. Therefore during use, the product should be kept away from electromagnetic interference resources, such as radio station and microwave ovens, etc.; See details of guidance and manufacturer's statement in the subsequent “Guidance and Manufacturer's Statement”.
Table 2: Electromagnetic immunity 1 Guidance and manufacturer's statement - Electromagnetic immunity Comper SkinEnergy is intended for use in the electromagnetic environment as specified below.
(50/60 Hz) magnetic field shall be at the level characteristic of a typical location in a typical commercial or hospital environment. IEC61000-4-8 Note: UT is the a.c. mains voltage prior to application of the test voltage. Table 3: Electromagnetic immunity 2 Guidance and manufacturer's statement - Electromagnetic immunity Comper SkinEnergy is intended for use in the electromagnetic environment as specified below.
d The recommended separation distance in m b. Field strengths from fixed RF transmitters, as determined by an electromagnetic site survey c, should be less than the compliance level in each frequency range d. Interference may occur in the vicinity of equipment marked with the following symbols. Note 1: At 80 MHz and 800 MHz, the formula used for higher frequency range applies. Note 2: These guidances may not apply in all situations.
Maximum rated output power of transmitter/W Separation distance according to the frequency of transmitter/m 150 kHz~80 MHz 80 MHz~800 MHz d = 1.2 P d = 1.2 P 800 MHz~2.5 GHz d = 2.3 P 0.01 Not applicable 0.12 0.23 0.1 Not applicable 0.38 0.73 1 Not applicable 1.2 2.3 10 Not applicable 3.8 7.
-Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure statement.