User Guide ThinkPad 8
Note: Before using this information and the product it supports, be sure to read and understand the following: • Safety, Warranty, and Setup Guide • Regulatory Notice • “Important safety and handling information” on page iii • Appendix D “Notices” on page 65 The latest Safety, Warranty, and Setup Guide and the Regulatory Notice are available on the Lenovo Support Web site at http://www.lenovo.com/UserManual. First Edition (January 2014) © Copyright Lenovo 2014.
Contents Read this first . . . . . . . . . . . . . Important safety and handling information . . . . . iii Chapter 5. Recovery overview . . . . 31 iii Refreshing your tablet . . . . . . . . . . . . Resetting your tablet to the factory default settings . . . . . . . . . . . . . . . . . Using the advanced startup options . . . . . . Recovering your operating system if Windows 8.1 fails to start . . . . . . . . . . . . . . . . Creating and using recovery media . . . . . . 31 Chapter 1.
Federal Communication Commission Interference Statement. . . . . . . . . . Industry Canada statement . . . . . . . . European Union - Compliance to the Electromagnetic Compatibility Directive . . . German Class B compliance statement . . . Korea Class B compliance statement . . . . Japanese VCCI Class B statement . . . . . Japan compliance statement for products which connect to the power mains with rated current less than or equal to 20 A per phase . Lenovo product service information for Taiwan . . . . .
Read this first Be sure to follow the important tips given here to get the most use and enjoyment out of the tablet. Failure to do so might lead to discomfort or injury, or cause the tablet to fail. Important safety and handling information To avoid personal injury, property damage, or accidental damage to your ThinkPad® 8 (hereafter called the tablet), read all of the information in this section before using it. For detailed operating instructions, refer to the ThinkPad 8 User Guide (this publication).
Charging method Tablet on (display on) Tablet off or in screen lock mode (display off) ThinkPad 8 AC Adapter Supported, but the battery will be charged slowly Supported (fastest charging method) ThinkPad Tablet DC Charger Supported, but the battery will be charged slowly Supported USB connection between the micro USB 3.0 connector on the tablet and a USB connector on a personal computer or other devices that comply with the USB 2.0/3.
Take care when using your tablet in a motor vehicle or on a bicycle: Always prioritize your safety and the safety of others.Follow the law. Local laws and regulations might govern how you can use mobile electronic devices, such as your tablet, while you drive a motor vehicle or ride a bicycle.
vi User Guide
Chapter 1. Product overview This chapter provides an overview of the tablet, including the locations of connectors and controls, tablet features, accessories, specifications, operating environment, and preinstalled Lenovo programs. Tablet layout This topic introduces the tablet hardware features to give you the basic information you will need to start using the tablet. Front view and side view Figure 1.
1 Power button Press the power button to turn on the tablet. To turn off the tablet, swipe in from the right edge of the screen to display the charms. Then tap Settings ➙ Power ➙ Shut down. If the tablet stops responding and you cannot turn it off, press and hold the power button for four seconds or more. If the tablet still is not responding, remove the ac power adapter and use the emergency-reset hole to reset the tablet.
6 Micro HDMITM connector Your tablet has a micro High-Definition Multimedia Interface (HDMI) connector, which is a digital audio and video interface that can connect a compatible digital audio device or video display such as a high-definition television (HDTV). For more information, see “Using HDMI devices” on page 17. 7 Micro SD card reader Open the micro SD card reader cover to access the micro secure digital (SD) card reader.
Back-side view Note: Your tablet might look slightly different from the following illustration. Figure 2. Back-side view 1 Rear-facing camera with a flash 3 Speakers 2 System-status indicator 1 Rear-facing camera with a flash Your tablet has an 8-megapixel rear-facing camera with a flash. You can use the camera to take pictures and create videos. For more information, see “Using the cameras” on page 15.
Accessories Figure 3. Accessories • ThinkPad 8 AC Adapter and the USB 3.0-type dc cord: Use the ac power adapter together with the supplied USB 3.0-type dc cord to provide ac power to your tablet and charge the battery. • ThinkPad 8 Quickshot Cover: The ThinkPad 8 Quickshot Cover (hereafter called the cover) can be attached to the tablet magnetically.
Connectors • One micro USB 3.0 connector • One micro HDMI connector • One combo audio connector Card slot or card reader • Micro-SIM-card slot • Micro SD card reader Wireless features • Bluetooth 4.0 (on some models) • Wireless LAN (802.11a/g/n) • Wireless WAN (on some models) • Global Positioning System (GPS) satellite receiver (on models with wireless WAN) Specifications Size • Width: 224.3 mm (8.83 inches) • Depth: 132 mm (5.20 inches) • Height: 8.8 mm (0.35 inch) Battery • 20.
Lenovo programs Your tablet comes with Lenovo programs to help you work more easily and securely. To access Lenovo programs, swipe in from the right edge of the screen to display the charms. Then tap the Search charm to search for the desired program. The following table provides a brief introduction to some Lenovo programs that might be preinstalled on your tablet. Note: Preinstalled Lenovo programs vary by geographic locations and are subject to change.
8 User Guide
Chapter 2. Using your tablet This chapter provides instructions on how to use some basic applications and many of your tablet’s features. Initial setup instructions To use the tablet the first time after you take it out of the box, ensure that you follow the instructions below: 1. Use the supplied USB 3.0-type dc cord and ac power adapter to connect the tablet to an electrical outlet. 2. Press the power button to turn on the tablet. 3. Follow the instructions on the screen to complete the initial setup.
Tasks Touch gestures To zoom out Move two fingers closer together. To zoom in Move two fingers farther apart. To rotate an item Put two or more fingers on an item, and then rotate your fingers (supported only on some models). To open a menu with multiple options Tap and hold. To display the charms that contain system commands, such as Start, Settings, Search, Share, and Devices Swipe in from the right edge. To cycle through and switch to open applications Swipe in from the left edge.
Tasks Touch gestures To view the recently used applications or select an active application from the list Swipe in and out on the left edge. To view all applications on the Start screen • Swipe up to the top edge. • Tap the downward arrow ( ) located near the bottom-left corner of the Start screen. To customize tiles on the Start screen, or uninstall an application • Swipe in from the top or bottom edge, tap Customize, and then tap the desired icon. • Press and hold the desired icon.
Tips on using the multi-touch screen • The multi-touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any metallic object on the screen, which might damage the touch panel or cause it to malfunction. • Do not use fingernails, gloved fingers, or inanimate objects for input on the screen. • Regularly calibrate the accuracy of the finger input to avoid a discrepancy. Tips on cleaning the multi-touch screen • Turn off the tablet before cleaning the multi-touch screen.
2. Tap Properties. The Taskbar and Navigation properties window is displayed. 3. On the Navigation tab, locate the Start screen section, and then do one of the following: • To set the desktop as your default startup screen, select When I sign in or close all apps on a screen, go to the desktop instead of Start so a check is visible. • To set the Start screen as your default startup screen, remove the check from the When I sign in or close all apps on a screen, go to the desktop instead of Start checkbox. 4.
Put the tablet into sleep mode or wake up the tablet If the cover is open and the tablet is on, the tablet, by default, enters sleep mode automatically after you close the cover. If the cover is closed and the tablet is in sleep mode, the tablet, by default, wakes up from sleep mode when you open the cover. You also can change the settings so that by closing the cover you can shut down the tablet, put the tablet into hibernation mode, or do nothing.
Launch the camera When you use the tablet with the cover open to an angle of 360 degrees, you can flip over the magnetic tab of the cover as shown to launch the camera automatically. By default, this function is enabled. If you want to disable this function, do the following: 1. From the Start screen, tap Lenovo Settings ➙ Camera. 2. Follow the instructions on the screen to disable it. Serve as a stand for the tablet The cover can serve as a stand for the tablet as shown.
2. In the View section, select Front-facing camera or Rear-facing camera from the Select a camera drop-down list box to switch the cameras. You also can use the camera with other applications that provide features such as photographing, video capturing, and video conferencing. To download other applications, tap Lenovo App Store or Windows Store from the Start screen. Then follow the instructions on the screen. Using the micro SD card reader Your tablet has a micro SD card reader.
3. Insert the card into the micro SD card reader. The card might stop before it is completely installed into the card reader. Ensure that you insert the card firmly until you hear a click. Removing a micro SD card To remove a micro SD card, do the following: 1. Open the card reader cover. 2. Push the micro SD card inward a little until you hear a click 1 . Then, release it. The micro SD card pops out. 3. Gently slide the card out of the card reader 2 .
2. Tap the Devices charm. 3. Tap Project ➙ Second screen. 4. Tap to select a presentation scheme. Using synchronization solutions By using synchronization solutions, you can easily synchronize settings between your tablet and other personal computer. Synchronizing settings by using the Windows synchronization solution To access Windows synchronization solution, do the following: 1. Swipe in from the right edge of the screen to display the charms. 2. Tap Settings ➙ Change PC settings. 3.
3. Disconnect the ac power adapter from your tablet when the battery power is full, or leave the ac power adapter connected to operate from ac power.
1. Swipe in from the right edge of the screen to display the charms. 2. Tap Settings ➙ Power ➙ Sleep. • Turn off your tablet if you are not going to use it for a while. To turn off your tablet, do the following: 1. Swipe in from the right edge of the screen to display the charms. 2. Tap Settings ➙ Power ➙ Shut down. Checking the battery status Get the approximate status of your battery at any time by checking the desktop battery-status icon in the Windows notification area.
Chapter 3. Wireless networks and devices Your tablet can connect to a variety of networks and devices, including mobile networks (3G or 4G), Wi-Fi data networks, and Bluetooth devices. Note: Some tablet models can connect to both mobile networks (3G or 4G) and Wi-Fi networks, while others can connect to Wi-Fi networks only. If your tablet supports Wi-Fi connection only, the information related to mobile networks does not apply to your tablet.
3. Hold the micro SIM card with the metal contacts facing down, and then insert it firmly into the micro-SIM-card slot as shown until you hear a click. 4. Close the micro-SIM-card slot cover and turn on your tablet. To remove the micro SIM card, do the following: 1. Turn off the tablet. 2. Open the micro-SIM-card slot cover.
3. Push the micro SIM card inward until you hear a click 1 . The micro SIM card ejects. Gently slide the micro SIM card out of the slot 2 . 4. Close the micro-SIM-card slot cover. Determining which mobile network you are using If you have connected to a network, you can check the network name to see which mobile network you are using. To check the network name, do one of the following: • Swipe in from the right edge of the screen to display the charms. Then tap the Settings charm.
4. Tap the ID of the network you want to connect. 5. Follow the instructions on the screen to connect to the Wi-Fi network. To view security, address, and other information about the Wi-Fi network you are connected, do the following: 1. Swipe in from the right edge of the screen to display the charms. 2. Tap Settings ➙ Change PC settings. 3. In the navigation panel, tap Network ➙ Connections. 4. In the Wi-Fi section, tap the network name to view the information.
1. Swipe in from the right edge of the screen to display the charms. 2. Tap the Settings charm. 3. Tap the network icon. A list of available networks is displayed. 4. In the Mobile broadband section, slide to the right to turn it on. 5. Tap the network name. A menu is displayed. 6. Tap Connect. When you are connected to the mobile network, set the active mobile network as metered connection to reduce the amount of data you send and receive.
3. In the navigation panel, tap PC and devices ➙ Bluetooth. 4. Slide to the right to turn it on. The tablet will search for Bluetooth devices. 5. When the Bluetooth device you want to pair is found, tap the ID of the Bluetooth device. 6. Tap Pair. Unpairing a Bluetooth device To unpair a Bluetooth device, do the following: 1. Swipe in from the right edge of the screen to display the charms. 2. Tap Settings ➙ Change PC settings. 3. In the navigation panel, tap PC and devices ➙ Bluetooth. 4.
Chapter 4. Security This chapter provides information about how to protect the information stored on your tablet. Using passwords You can help prevent your tablet from unauthorized use by using passwords. Once you set a password, a prompt is displayed on the screen each time you turn on the tablet. Enter your password at the prompt. You cannot use the tablet unless you type the correct password.
b. In the Enter New Password field, enter a new supervisor password. c. In the Confirm New Password field, reenter the new supervisor password and tap OK. d. In the Changes have been saved window, tap OK. • To remove a password, do the following: a. Tap Enter. A window opens. In the Enter Current Password field, enter the current supervisor password. b. Leave the Enter New Password and Confirm New Password fields blank. Tap OK. c. In the Changes have been saved window, tap OK.
6. Set the items that you want to set. 7. Save configuration changes and exit. Using firewalls If your system is preinstalled with a firewall program, it protects against computer Internet security threats, unauthorized access, intrusions, and Internet attacks. It also protects your privacy. For more information about how to use the firewall program, refer to the online help that comes with the program.
30 User Guide
Chapter 5. Recovery overview This section provides information about the recovery solutions. A Windows recovery image is preinstalled in the recovery partition on your tablet. The Windows recovery image enables you to refresh your tablet, or reset your tablet to the factory default settings. You can create recovery media as backups or replacement for the Windows recovery image. With the recovery media, you can troubleshoot and fix the problems on your tablet even if you cannot start the operating system.
Using the advanced startup options With the advanced startup options, you can change the firmware settings of the tablet, change the startup settings of the Windows operating system, start the tablet from an external device, or restore the Windows operating system from a system image. To use the advanced startup options, do the following: 1. Swipe in from the right edge of the screen to display the charms. 2. Tap Settings ➙ Change PC settings. 3. In the navigation panel, tap Update and recovery ➙ Recovery.
Important: If you clear the Copy the recovery partition from the PC to the recovery drive. option, you will create recovery media without the recovery partition content. You still can start the tablet from the recovery media, but you might be unable to recover your tablet if the recovery partition on your tablet is damaged. 6. Connect a proper USB drive, then tap Next. 7. Tap Create in the Recovery Drive window. The creation of the recovery media starts. 8.
34 User Guide
Chapter 6. Advanced configuration If you need to update your system UEFI BIOS, install new device drivers, this information will help you handle your tablet with proper care and keep it in top working shape. • “Installing device drivers” on page 35 • “ThinkPad Tablet Setup” on page 35 • “Using system management” on page 36 Installing device drivers The device drivers are available at http://www.lenovo.com/ThinkPadDrivers. Choose your tablet product name to view all the device drivers for your tablet.
On each menu, tap the default value to show selectable options and tap a desired option to select it. You can follow the instructions on the screen to configure settings. After you change the settings, tap Restart, and then tap your desired option to restart the tablet. Notes: • Some items are displayed on the menu only if the tablet supports the corresponding features. • The default configurations are already optimized for you. Incorrect change of the configurations might cause unexpected results.
Note: Remote Program Load (RPL) cannot be used with your tablet. Asset ID EEPROM The Asset ID EEPROM contains information about the system, including its configuration and the serial numbers of key components. It also includes a number of blank fields in which you can record information about the end users in your network. Setting management feature Your network administrator can remotely update the system programs on your tablet from a management console.
38 User Guide
Chapter 7. You and your tablet This chapter provides the accessibility information about your tablet, and instructions on traveling with the tablet and maintaining the tablet. Comfort and accessibility Read this topic to learn how to use your tablet more comfortably and how to use the accessibility features. Using your tablet more comfortably With the help of all the conveniences and powerful features of your tablet, you can carry your tablet all day long for work or entertainment at many places.
Getting updates from Lenovo Your tablet is preinstalled with System Update. This program enables you to keep the Lenovo software on your tablet up-to-date by downloading and installing software updates. To start System Update, do the following: 1. Swipe in from the right edge of the screen to display the charms. 2. Tap the Search charm to search for System Update. 3. Tap System Update. 4. Follow the instructions on the screen.
If you are traveling to another country or region, you might want to consider these items: • A ThinkPad 8 AC Adapter for the country to which you are traveling • A micro SIM card for the local mobile services in that country or region Other items you might want to consider: • ThinkPad headphones • Additional storage devices or flash media cards • A ThinkPad Tablet DC Charger if you are traveling by automobile Care and maintenance Handle your tablet with care so that you can enjoy this product for a long ti
42 User Guide
Chapter 8. Troubleshooting problems This chapter describes on what to do if you experience a problem with your tablet. Diagnosing problems If you experience problems with your tablet, use the Lenovo Solution Center program as a starting point for solving them. The Lenovo Solution Center program enables you to troubleshoot and resolve tablet problems.
If the problem persists, contact Lenovo for technical support. Battery problem • Problem: The battery does not charge correctly. Suggested solution: Check if the ac power adapter is connected correctly. If the connection is good but the battery still does not charge, contact Lenovo to replace with a new battery. System problem • Problem: Unable to turn the tablet on. Suggested solution: Connect your tablet to an ac power outlet to see if the problem is caused by a drained battery.
Error messages Message: 0183: Bad CRC of Security Settings in EFI Variable. Enter ThinkPad Tablet Setup. Solution: Checksum of the Security settings in the EFI Variable is not correct. Enter ThinkPad Tablet Setup to check Security settings, and restart the system. If you still have a problem, have the tablet serviced. Message: 0187: EAIA data access error Solution: The access to EEPROM is failed. Have the tablet serviced. Message: 0188: Invalid RFID Serialization Information Area.
2. Tap More power options ➙ Balanced. • Problem: When I turn on the tablet, nothing is displayed on the screen and the tablet does not beep while starting up. Note: If you are not sure whether you heard any beeps, turn off the tablet by pressing and holding the power button for four seconds or more. Turn it on and listen again. Solution: Ensure that: – The tablet is connected to the ac power adapter by the supplied USB cable and the ac power adapter is plugged into a working electrical outlet.
Chapter 9. Getting support This chapter provides information about getting help and support from Lenovo. Lenovo technical support After you buy a ThinkPad 8, register your tablet with Lenovo. Using the registered information, Lenovo can contact you in case of a recall or other severe problems. After you register your tablet with Lenovo, you will receive quicker service when you call Lenovo for help. In addition, some locations offer extended privileges and services to registered users.
Locating the machine type and model (MTM) number and the system serial number When calling for technical assistance, you are requested to provide the MTM number and the system serial number of your tablet. To get the MTM number and the serial number, check the MTM label shown as below: Figure 4.
For more information about these services, go to: http://www.lenovo.com/essentials Chapter 9.
50 User Guide
Appendix A. Regulatory information This appendix provides regulatory information. Wireless related information Wireless interoperability The M.2 wireless LAN card is designed to be interoperable with any wireless LAN product that is based on Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK), and/or Orthogonal Frequency Division Multiplexing (OFDM) radio technology, and is compliant to: • The 802.11b/g Standard, 802.11a/b/g or 802.11n draft 2.
Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safety standards and recommendations, Lenovo believes they are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Locating wireless regulatory notices For more information about the wireless regulatory notices, refer to the Regulatory Notice shipped with the tablet. If the tablet is shipped without the Regulatory Notice, you can find it on the Web site at: http://www.lenovo.com/UserManual Export classification notice This product is subject to the United States Export Administration Regulations (EAR) and has an Export Classification Control Number (ECCN) of 5A992.c.
FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter, except tested built-in radios. The County Code Selection feature is disabled for products marketed in the US/ Canada. Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.
Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von Betriebsmitteln Dieses Produkt entspricht dem „Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln“ EMVG (früher „Gesetz über die elektromagnetische Verträglichkeit von Geräten“). Dies ist die Umsetzung der EU-Richtlinie 2004/108/EG (früher 89/336/EWG) in der Bundesrepublik Deutschland. Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische Verträglichkeit von Betriebsmitteln, EMVG vom 20.
Модели, относящиеся к настоящей серии (семейству) продуктов и впервые выпущенные в обращение после 14 февраля 2013 года, сертифицированы в единой системе сертификации Таможенного Союза на соответствие требованиям применимых Технических Регламентов и маркируются знаком EAC. Appendix A.
58 User Guide
Appendix B. Environmental, recycling, and disposal information Lenovo recycling statement Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information on recycling Lenovo products, go to: http://www.lenovo.
If you use a Lenovo notebook computer at home and need to dispose of a battery pack, you must comply with local ordinances and regulations. You also can refer to the instructions at http://www.lenovo.com/jp/ja/environment/recycle/battery/.
Battery recycling information for Taiwan Battery recycling information for the United States and Canada Battery recycling information for the European Union Notice: This mark applies only to countries within the European Union (EU). Batteries or packaging for batteries are labeled in accordance with European Directive 2006/66/EC concerning batteries and accumulators and waste batteries and accumulators.
China recycling information for Waste Electrical and Electronic Equipment (WEEE) 62 User Guide
Appendix C. Restriction of Hazardous Substances Directive (RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”). For more information about Lenovo progress on RoHS, go to: http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.
Ukraine RoHS India RoHS RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.
Appendix D. Notices Lenovo might not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service might be used.
Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo ThinkPad ThinkVantage UltraConnect Microsoft and Windows are trademarks of the Microsoft group of companies. Intel and Intel Atom are trademarks of Intel Corporation in the U. S. and/or other countries. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries.
