Call transfer You can make 2 calls connect each other, and hang up While on calls 1. Press <(Select) 2. 3. 4(Move) to Call transfer Press <(Select) Multi-party (Conference) F You can make Multi-party in one connection and have up to 5 calls in it. Only one Multi-party is available at a time.
Making a Multi-party While on 2 calls, one connection is on hold 1. Press <(Select) 2. 4(Move) to Conference call 3. Press <(Select) Add more calls You can have up to 5 calls in a Multi-party. While on a Conference 1. Press @(Hold) The Conference is on hold 2. Make another call OR Answer an incoming call 3. Press <(Select) 4. 5. 4(Move) to Conference call Press <(Select) Splitting a call You can split a call from a Multi-party and make it another connection. While on a Multi-party 1. Press <(Select) 2.
Ending a call in a Multi-party You can end a call individually. While on a Multi-party 1. Press <(Select) 2. 4(Move) to Hang up 3. Press <(Select) 4. 4(Move) to a required phone number 5. Press <(Select) Ending a Multi-party You can end a Multi-party connection. While on a Multi-party 1. Press D(End) 2. All calls are disconnected DTMF Tones DTMF (Dual Tone Multi-Frequency) Tones can be sent during a conversation. These are often used to access voice mail, paging and computerised home banking.
Text Entry You can use alphanumeric characters to enter text.
T9® Text Input Using this mode of text entry dramatically reduces the number of key presses required: Press a key once for any letter you require on that key. The desired letter may not be displayed. Continue pressing other keys until the end of a word is reached; then check that the word has been typed correctly before continuing on to the next word. If the combination of letters typed has produced a word which is not the one you require, press 4 repeatedly until the correct word is displayed.
Exploring the Menus Exploring the Menus 29
My Phone You can customize the phone with this My Phone menu which has various setting options for different events and environments. Profiles You can switch in 4 different ways, each with a distinct combination settings of Ring Volume, Ring Type, Message Tone, Slide Open Tone, Slide Close Tone, Keypad Tone, Warning Tone, Alerting Method.
Sounds You can select each sound from various preinstalled selection or downloaded melodies. Volume You can controll volume of the tone. From Sounds menu 1. Press <(Select) Volume 2. The phone will start to ring 3. 0(Control) the volume 4. 1 or 7 Volume up 3 or 5 Volume down Press <(OK) Ringtone You can select a sound of ringtone from various preinstalled selection or downloaded melodies. From Sounds menu 1. 4(Move) to Ringtone 2. Press <(Select) 3. 4. 5. 6.
Message tone You can select a sound of ringtone from various preinstalled selection or downloaded melodies. From Sounds menu 1. 4(Move) to Message tone 2. Press <(Select) 3. 4(Move) to Preinstalled or User data 4. Press <(Select) 5. 4(Move) to a required sound and sample sound will be played 6. Press <(OK) Slide open tone You can set outcoming ringtone Off or select melody from various preinstalled selection or downloaded melodies. From Sounds menu 1. 4(Move) to Slide open tone 2. Press <(Select) 3. 4.
Key tone The key tone is the sound you hear when you press a key. From Sounds menu 1. 4(Move) to Key tone 2. Press <(Select) 3. 4(Move) to On or Off 4. Press <(Select) Warning tone Warning tone informs you of low battery. From Sounds menu 1. 4(Move) to Warning tone 2. Press <(Select) 3. 4(Move) to On or Off 4. Press <(Select) Alerts You can set the phone how the Alerts informs you. From Sounds menu 1. 4(Move) to Alerts 2. Press <(Select) 3. 4(Move) to On or Off 4.
Display Wallpaper You can change the Wallpaper of the idle screen. From Display menu 1. 4(Move) to Wallpaper 2. Press <(Select) 3. 4. 5. 6. 4(Move) to a required folder Press <(Select) 4(Move) to a required Wallpaper Press <(Select) Colour themes You can change the Colour themes which affect the colour of the cursor and text. From Display menu 1. 4(Move) to Colour themes 2. Press <(Select) 3. 4.
Operator notice F Operator notice is the feature which remind you how to operate selected feature after you left the display idle few minites. From Display Menu 1. 4(Move) to Operator notice 2. Press <(Select) 3. 4(Move) to On or Off 4. Press <(OK) Backlight time You can set the time length of the backlight 3 different length. From Display Menu 1. 4(Move) to Backlight time 2. Press <(Select) 3. 4.
Slide settings You can set some actions with opening or closing the phone body. Key guard You can set the Key guard on or off when closing the phone body. From Slide settings menu 1. <(Select) Key guard 2. 4(Move) to On or Off 3. Press <(OK) Active slide Set the Active slide on or off. From Slide settings menu 1. 4(Move) to Active slide 2. 3. 4. <(Select) 4(Move) to On or Off Press <(OK) Open action You can select the action with opening the phone body. From Slide settings menu 1.
Language You can change the display language of the phone. If you select Automatic, the network will select a proper language (F). From My Phone menu 1. 4(Move) to Language 2. 3. 4. <(Select) 4(Move) to a required language or Automatic Press <(OK) Auto answer When you connect the Personal Handsfree earpiece, you can set the Auto answer on and answer a call automatically. From Phone Menu 1. 4(Move) to Auto answer 2. 3. 4.
Menu view You can change the method of menu displaying. From Phone Menu 1. 4(Move) to Menu view 2. Press <(Select) 3. 4(Move) to a required method 4. Press <(OK) 9 launcher mode In this mode, you can see whole 1st level of the main menu. In Main menu 1. 0(Move) to a required menu 2. Press <(Select) OR # - , are available Scroll launcher In this mode, you can roll up/down the menu with 4 and press < to select a required menu, or you can use # - , to select.
Phone settings You can customize the each phone settings. From Phone Menu 1. 4(Move) to Phone settings 2. Press <(Select) 3. 4(Move) to a required settings 4. Press <(Select) Call service From Phone settings 1. 4(Move) to Call service 2. Press <(Select) 3. 4(Move) to a required setting 4. Press<(Select) Show my number You can select how display your ID. From Call service menu 1. Press <(Select) 2. 3. 4(Move) to a required method Press <(OK) Connections You can see the total of the transfferd data.
Service charges You can control the cost of calls with setting the limit on the cost of calls and charge unit of the call time. From Call services 1. 4(Move) to Service charges 2. Press <(Select) 3.
Calls You can check the call status. From Call services 1. 4(Move) to Calls 2. Price <(Select) 3. 4. 4(Move) to a required status Price <(Select) Active line You can a select line to activate. From Calls menu 1. Press <(Select) 2. 3. 4(Move) to Line 1 or Line 2 Press <(Select) Withhold ID You can check how your call ID is sent. From Calls menu 1. 4(Move) to Withhold ID 2. Press <(Select) 3. Your sent ID is shown Caller’s ID You can check how caller’s ID is received. From Calls menu 1.
Call waiting You can activate Call waiting and see the status. From Calls menu 1. 4(Move) to Call waiting 2. Press <(Select) 3. 4. 4(Move) to On, Off or Status Press <(Select) All calls You can see the total of the duration time. From Calls menu 1. 4(Move) to All calls 2. Press <(Select) Available to Reset the total Last calls From Calls menu 1. 4(Move) to Last call 2. Press <(Select) Call diverts You can divert calls and set the condition by type of the calls. Cancel all No calls will be diverted.
Data calls Data calls will be diverted. From Call diverts 1. 4(Move) to Data calls 2. Press <(Select) 3. 4(Move) to Status, On or Off When you select On, enter the phone number to divert 4. Press <(Select) Fax calls Fax calls will be diverted. From Call diverts 1. 4(Move) to Fax calls 2. Press <(Select) 3. 4(Move) to Status, On or Off When you select On, enter the phone number to divert 4. Press <(Select) Voice calls You can select from the 4 types of Voice calls. From Call diverts 1.
Security You can put a limit to protect your phone, SIM, calls, information and datas. You must enable the PIN before changing the code. Fixed dial E You can put a limit your outgoing calls except a certain set of numbers saved in FDN, which is located in your SIM. When Fixed dial is enabled, only FDN is available to dial, and any attempt to call any other number will fail. (see Fixed dial number on page xx) From Security menu 1. Press <(Select) 2. Enter SIM PIN2 code with # - , 3. Press <(OK) 4. 5.
PIN You can protect your SIM against unauthorised use. If you enable the PIN, every time the phone is switched on, you will be prompted to enter the PIN code. Enable PIN to change the PIN code and enter PIN to unable. From Security code 1. 4(Move) to PIN 2. Press <(Select) 3. 4(Move) to Change or Status Press <(Select) 4. Changing PIN code 1. Enter old PIN code with # - , 2. Press <(OK) 3. Enter new PIN code with # - , 4. Press <(OK) Changing the Status 1. 4(Move) to On or Off 2. Press <(Select) 3.
Change password You can change the password. Cancel all You can cancel all the Call bar settings. Bar data You can bar Data calls and select the type from Off, International calls except home, International calls or All calls. Bar voice You can bar Voice calls and select the type from Incoming calls and/or Outgoing calls. Phone lock You can lock your phone and will be prompted to enter your unlock code when you switch on the phone with a different SIM inserted.
Network You can select a network that is available in your current location. From Phone settings menu 1. 4(Move) to Network 2. Press <(Select) 3. 4(Move) to Search mode or New network 4. Press <(Select) Search mode You can select an available network by Manual or Automatic. New network You can find new network from the list. Defaults You can make all personal settings return to the factory default settings. From My Phone menu 1. 4(Move) to Defaults 2. Press <(Select) 3.
Contacts You can store phone numbers in two locations, such as SIM Contacts list and the phone Contacts list. Note: See Text Entry on page xx, for information of entering text. Contacts list You can browse SIM and the phone Contacts list individually, or both Contacts lists a time. Viewing the Contacts list From Contacts menu 1. <(Select) 2.