X100̲OI̲English̲AAA.book Page 37 Friday, August 6, 2004 3:11 PM Shortcut key You can assign two selected functions to the Right soft key and activate them by a Short press (press once) or a Long press (press and hold). From My Phone menu 1. 4 move to Shortcut key 2. Press <(Select) 3. 4 move to Short press or Long press 4. Press <(Select) 5. 4 move to the required function 6.
X100̲OI̲English̲AAA.book Page 38 Friday, August 6, 2004 3:11 PM Phone settings You can customise each phone setting. From My Phone menu 1. 4 move to Phone settings 2. Press <(Select) 3. 4 move to the required settings 4. Press <(Select) Call services From Phone settings menu 1. 4 move to Call services 2. Press <(Select) 3. 4 move to the required setting 4. Press<(Select) Calls F You can check the call status. From Call services menu 1. 4 move to Calls 2. Press <(Select) 3.
X100̲OI̲English̲AAA.book Page 39 Friday, August 6, 2004 3:11 PM Service charges E You can control the cost of calls by setting the limit on the cost of calls and charge units of call time. From Call services menu 1. 4 move to Service charges 2. Press <(Select) 3. 4 move to the required item to set 4. The current setting is displayed. You need to enter the PIN2 code to edit the Max cost and Price unit. Cost left Check the cost left.
X100̲OI̲English̲AAA.book Page 40 Friday, August 6, 2004 3:11 PM Call diverts You can divert calls by setting the condition according to the type of calls. From Phone settings menu 1. 4 move to Call diverts 2. Press <(Select) 3. 4 move to the required type of calls or Cancel all 4. Press <(Select) When you select Voice calls, 4 move to the required type and press <(Select) 5. 4 move to Status, On or Off 6. Press <(Select) When you select On, enter the phone number to divert.
X100̲OI̲English̲AAA.book Page 41 Friday, August 6, 2004 3:11 PM Security You can limit access to protect your phone, SIM, calls, information and data. You must enable the PIN before changing the code. Phone lock You can lock your phone, and you will be prompted to enter your unlock code when you switch on the phone with a different SIM inserted. From Security menu 1. Press <(Select) 2. 4 move to Status or Change code Note: You are advised to write down your unlock code for yourself.
X100̲OI̲English̲AAA.book Page 42 Friday, August 6, 2004 3:11 PM Changing the Unlock code From Phone lock menu 1. 4 move to Change code 2. Press <(Select) 3. Enter old unlock code 4. Press <(OK) 5. Enter new unlock code 6. Press <(OK) 7. Enter new unlock code to verify 8. Press <(OK) Call bar You can bar certain outgoing and/or incoming calls using a password supplied by your service provider. When updating/checking the Call bar status, the phone must be registered to a network. From Security menu 1.
X100̲OI̲English̲AAA.book Page 43 Friday, August 6, 2004 3:11 PM PIN You can protect your SIM against unauthorised use. Once you enable the PIN, you will be prompted to enter the PIN code each time you switch on the phone. You must enable the PIN before changing the PIN code, and you must enter the PIN code to unable the PIN. From Security menu 1. 4 move to PIN 2. Press <(Select) 3. 4 move to Status or Change 4.
X100̲OI̲English̲AAA.book Page 44 Friday, August 6, 2004 3:11 PM Fixed dial E The Fixed dial feature allows you to limit your outgoing calls to a certain set of numbers saved in FDN (Fixed Dial Numbers), which is located in your SIM. When this function is on, only FDN can be dialled, and any attempt to call other numbers will fail. From Security menu 1. 4 move to Fixed dial 2. Press <(Select) 3. Enter SIM PIN2 code with # - , 4. Press <(OK) 5. 4 move to On or Off 6.
X100̲OI̲English̲AAA.book Page 45 Friday, August 6, 2004 3:11 PM Contacts Contacts list page 46 Viewing the Contacts list ................................. 46 Viewing the entries in the Contacts list............ 46 Editing the Contacts list................................... 47 Making a call using the Contacts list ............... 47 Sending messages from the Contacts list ....... 48 Deleting an entry from the Contacts list .......... 48 Copying an entry to the other Contacts list .....
X100̲OI̲English̲AAA.book Page 46 Friday, August 6, 2004 3:11 PM Contacts list You can browse the SIM Contacts list and the Phone Contacts list individually, or both Contacts list together. Viewing the Contacts list From Contacts menu 1. Press <(Select) 2. 4 move to the required entry OR Press the numeric key which contains the first letter of the required name Located in Phone Contacts list Located in SIM Contacts list Viewing the entries in the Contacts list From Contacts list menu 1.
X100̲OI̲English̲AAA.book Page 47 Friday, August 6, 2004 3:11 PM Editing the Contacts list From Contacts list menu 1. 4 move to the required entry OR Press the numeric key which contains the first letter of the required name 2. Press <(Menu) 3. 4 move to Edit 4. Press <(Select) 5. 4 move to the required item 6. Press <(Edit) 7. Edit an entry item 8. Press <(OK) 9. Press A(Save) Note: SIM Contacts list can contain only Name, Tel number 1 and Location No.
X100̲OI̲English̲AAA.book Page 48 Friday, August 6, 2004 3:11 PM Sending messages from the Contacts list You can send messages via the Contacts list (see “Messages” on page 73). From Contacts list menu 1. 4 move to the required entry OR Press the numeric key which contains the first letter of the required name 2. Press <(Menu) 3. 4 move to Create MMS or Create SMS/EMS 4. Press <(Select) 5. 4 move to the required item 6. Press <(Select) 7.
X100̲OI̲English̲AAA.book Page 49 Friday, August 6, 2004 3:11 PM Create SIM Contacts list: You can store Name, Tel number and Location No. Phone Contacts list: You can store Name, 3 Tel numbers, 2 E-mail addresses, Ringtone type, Group, Hot key dial, Photo, Note and Location No. Creating a new entry From Contacts menu 1. 4 move to Create 2. Press <(Select) 3. 4 move to SIM or Phone 4. Press <(Select) 5. 4 move to the required item 6. Press <(Edit) 7. Edit the entry item 8. Press <(OK) 9.
X100̲OI̲English̲AAA.book Page 50 Friday, August 6, 2004 3:11 PM From Contacts list menu 1. 4 move to [New entry] 2. Press <(Select) 3. 4 move to SIM or Phone 4. Press <(Select) 5. 4 move to the required item 6. Press <(Edit) 7. Edit the entry item 8. Press <(OK) 9.
X100̲OI̲English̲AAA.book Page 51 Friday, August 6, 2004 3:11 PM Groups You can categorise the phone Contacts entries into 10 groups. You can name, select a particular ringtone, and insert a photo as an icon for each group to identify incoming calls. This function is available with Phone Contacts list only. Viewing the Group From Contacts menu 1. 4 move to Groups 2. Press <(Select) 3. 4 move to the required group 4. Press <(Menu) 5. 4 move to View 6.
X100̲OI̲English̲AAA.book Page 52 Friday, August 6, 2004 3:11 PM Memory status Memory status shows how many locations are available in each Contacts list. You can copy entries of the SIM Contacts list to the Phone Contacts list and vice versa. From Contacts menu 1. 4 move to Memory status 2. Press <(Select) 3. 2 bars indicating Contacts list memory status are displayed (in use location(s) / maximum locations) Copying all entries to the other Contacts list While displaying the Memory status 1.
X100̲OI̲English̲AAA.book Page 53 Friday, August 6, 2004 3:11 PM My numbers You can store and view your information such as your names and phone numbers in your SIM. Viewing My numbers From Contacts menu 1. 4 move to My numbers 2. Press <(Select) 3. 4 move to Line 1 or Line 2 4. Press <(Menu) 5. 4 move to View 6. Press <(Select) To edit the entry press <(Edit) Editing My numbers From My numbers menu 1. 4 move to Line 1 or Line 2 2. Press <(Menu) 3. 4 move to Edit 4. Press <(Select) 5.
X100̲OI̲English̲AAA.book Page 54 Friday, August 6, 2004 3:11 PM Voicemail You can store the phone number to your Voicemail and make a call to check if you have Voicemail. Viewing Voicemail From Contacts menu 1. 4 move to Voicemail 2. Press <(Select) 3. Press <(Menu) 4. 4 move to View 5. Press <(Select) To edit the entry press <(Edit) Editing Voicemail From Voicemail menu 1. Press <(Menu) 2. 4 move to Edit 3. Press <(Select) 4. 4 move to Name or Tel number 1 5. Press <(Edit) 6.
X100̲OI̲English̲AAA.book Page 55 Friday, August 6, 2004 3:11 PM Hot key dial You can quickly dial the numbers which are assigned to each numeric key $ - , (see “Hot key dial” on page 17). This function is available with Phone Contacts list only. Assigning Hot keys While editing the Contacts list entry 1. 4 move to 2. Press <(Edit) 3. Enter the required number $ - , 4.
X100̲OI̲English̲AAA.book Page 56 Friday, August 6, 2004 3:11 PM Games Games page 56 Playing a game ............................................... 56 Viewing Help for a game................................. 56 Wall Breaker.................................................... 57 Move Box ........................................................ 58 Games There are two preinstalled games in you phone. Playing a game From Games menu 1. 4 move to the required game 2. Press <(Select) 3.
X100̲OI̲English̲AAA.book Page 57 Friday, August 6, 2004 3:11 PM Wall Breaker Move a board to deflect a ball towards rows of various coloured bricks. Some of the bricks release power up items, such as board extension, ball reduce, gun and more. But be careful: there are some items that works in the opposite way. The next level is achieved by removing all the bricks.
X100̲OI̲English̲AAA.book Page 58 Friday, August 6, 2004 3:11 PM Move Box Arrange all the boxes into designated places. You can only push the boxes and only one at a time. So be careful not to push them into corners.
X100̲OI̲English̲AAA.book Page 59 Friday, August 6, 2004 3:11 PM Browser Starting the Browser page 59 Navigating contents......................................... 59 Using the Browser........................................... 60 Bookmarks page 61 Managing Bookmarks in Browser ................... 61 Managing off-line Bookmarks.......................... 62 Settings page 64 Editing GPRS Connection............................... 65 Editing CSD Connection .................................
X100̲OI̲English̲AAA.book Page 60 Friday, August 6, 2004 3:11 PM Using the Browser While browsing the homepage 1. Press A(Menu) or C(Send) 2. 4 move to Browser Menu To exit the browser, select Done OR Press D(Power/End) or @( ). 3. Press <( ) Menu 60 Description Back Return to the previous page. Go To URL Enter URL and jump to the homepage. Home Jump to the homepage which is pre-defined in the browser settings. Inbox Store, view or delete WAP push messages from the network.
X100̲OI̲English̲AAA.book Page 61 Friday, August 6, 2004 3:11 PM Bookmarks Once you store your favourite page or a frequently accessed page as a bookmark, you can jump to the page quickly. This eliminates the need to enter the URL every time. You also can assign hot keys to jump to particular pages. There are 2 types of bookmarks, one is in Browser and the other is off-line Bookmarks. Managing Bookmarks in Browser You can add a bookmark by entering the URL. From Browser Menu in Browser 1.
X100̲OI̲English̲AAA.book Page 62 Friday, August 6, 2004 3:11 PM Managing Bookmarks in Browser While viewing Bookmarks 1. 4 move to the required bookmark 2. Press A(Menu) 3. 4 move to the required function 4.
X100̲OI̲English̲AAA.book Page 63 Friday, August 6, 2004 3:11 PM Managing Bookmarks in off-line Bookmarks From Browser menu 1. 4 move to Bookmarks 2. Press <(Select) 3. 4 move to the required bookmark 4. Press <(Menu) 5. 4 move to the required function 6. Press <(Select) The following functions are available: Select Jump to the selected bookmark site. Edit Edit the Title and URL. Delete Delete the bookmark. Delete all Delete all bookmarks.
X100̲OI̲English̲AAA.book Page 64 Friday, August 6, 2004 3:11 PM Settings Before accessing the Internet services, you need to set up a subscription with your network operator or Internet Service Provider (ISP) to enable the relevant configuration information. If you have any trouble with your network settings, please contact your network service provider. Note: Modifying default settings may cause failure of the Browser. See “Personal Settings” on page 106, for your details. From Browser menu 1.
X100̲OI̲English̲AAA.book Page 65 Friday, August 6, 2004 3:11 PM Editing GPRS Connection From Connection menu 1. 4 move to GPRS 2. Press <(Select) 3. Press <(Select) to Edit • Login name, Password, GPRS APN, Authentication Editing CSD Connection From Connection menu 1. 4 move to CSD 2. Press <(Select) 3.
X100̲OI̲English̲AAA.book Page 66 Friday, August 6, 2004 3:11 PM Camera Camera Appearance page 66 Key functions................................................... 67 Status icons ..................................................... 68 Preview mode page 68 Launching the Camera Preview mode ............ 68 Operating the Camera..................................... 69 Options ............................................................
X100̲OI̲English̲AAA.
X100̲OI̲English̲AAA.book Page 68 Friday, August 6, 2004 3:11 PM Status icons Image size Quality Close up mode Brightness Zoom (only Wallpaper size) Twilight mode Preview mode Launching the Camera Preview mode • In idle screen, press @( • From main menu, press < Camera ) (if Camera is selected as Shortcut key) Note: The quality of display images may vary depending on the object or environment. Note: Displayed images may distort when shooting moving objects especially in a fast moving environment.
X100̲OI̲English̲AAA.book Page 69 Friday, August 6, 2004 3:11 PM Operating the Camera Brightness In Preview mode 3 brightness up 7 brightness down Zoom In Preview mode 1 zoom in 5 zoom out Taking a picture In Preview mode Press <(Shutter) to take a picture Note: See “Image size” below for changing the size of images Options In Preview mode 1. Press A( ) The option menu is displayed 2. 4 move to the required function 3. Press <(Select) Image size From options menu 1. Press <(Select) 2.
X100̲OI̲English̲AAA.book Page 70 Friday, August 6, 2004 3:11 PM Close up mode Close up mode can be used to take pictures at a close range. From options menu 1. 4 move to Close up mode 2. Press <(Select) 3. 4 move to On or Off 4. Press <(Select) Twilight mode Twilight mode can be used to take pictures in low light conditions. From options menu 1. 4 move to Twilight mode 2. Press <(Select) 3. 4 move to On or Off 4. Press <(Select) Quality You can choose the image quality of your picture.
X100̲OI̲English̲AAA.book Page 71 Friday, August 6, 2004 3:11 PM Self timer Self timer automatically takes a picture after a 10 second delay. After pressing the shutter, a series of ringtone will begin. The picture will be taken when you hear the shutter sound. From options menu 1. 4 move to Self timer 2. Press <(Select) 3. 4 move to On or Off 4. Press <(Select) Shutter sound You can change the sound of the shutter. From options menu 1. 4 move to Shutter sound 2. Press <(Select) 3.
X100̲OI̲English̲AAA.book Page 72 Friday, August 6, 2004 3:11 PM Capture mode When you press the shutter, all images are saved in My Pictures (see “My Media” on page 85). You can confirm and control the image before you save it. In Capture mode 1. Press <( ) 2. 4 move to the required function 3.
X100̲OI̲English̲AAA.book Page 73 Friday, August 6, 2004 3:11 PM Messages Settings page 73 Create page 77 Inbox and Outbox page 78 Chat SMS page 79 User messages page 79 Cell Broadcast page 80 MMS settings ...................................................74 SMS/EMS settings...........................................75 Receiving messages........................................76 Receiving Cell Broadcast messages ...............80 Reading Cell Broadcast messages..................
X100̲OI̲English̲AAA.book Page 74 Friday, August 6, 2004 3:11 PM MMS settings Server list You can configure up to 5 server profiles. From Settings menu 1. Press <(Select) 2. Press <(Select) 3. 4 move to the required network 4. Press <(Select) 5. 4 move to Activate or Edit 6. Press <(Select) To activate the selected network, select Activate. To edit the network settings, select Edit. 7. 4 move to the required setting 8.
X100̲OI̲English̲AAA.book Page 75 Friday, August 6, 2004 3:11 PM Other settings for MMS Signature You can set a signature to add to your message. Reply text You can select On or Off to add the reply text to the messages. Receive setting You can select, accept or reject anonymous messages. Auto reception You can select On, Off or Interactive. Mail settings Validity period: Set the duration that your message is stored at the message centre. Select Maximum or Manual.
X100̲OI̲English̲AAA.book Page 76 Friday, August 6, 2004 3:11 PM Receiving messages When one or more messages arrive, New Message(s)! dialogue and the message indicator ( ) will appear in the screen together with a message tone (see “Message tone” on page 32). Note: Please be sure to keep enough free memory for new messages. When the phone memory is full, ( ) will be displayed in the upper left of the display. Delete unnecessary messages from the Inbox or Outbox.