Data Sheet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
ComNet product 1 DIN Rail,
DIN Rail 1 standard electronic rack
adapting kit
Description
The ComNet series of DIN-Rail mount adaptor plate kits are ideal for
mounting ComNet modules to a standard 35mm DIN-Rail mounting channel.
A special adaptor plate assembly is also available for mounting DIN-Rail
mountable managed Ethernet switches or other equipment within a standard
19-inch (48.3cm) equipment cabinet.
DIN-Rail mounting is widely used within the industrial control and ITS
markets for mounting electronic and electrical hardware within an equipment
cabinet, and it affords significant ease of installation, greater mounting
density, and neatness/good housekeeping within spaces having limited area.
For those applications where it is desired to mount ComNet shelf-mount
products on an existing DIN-Rail, two (2) different standard DIN-Rail adaptor
plates are offered:
DINBKT1: DIN-Rail Adaptor Plate, with mounting hardware kit. This plate
is to be selected when DIN-Rail mounting any ComFit-sized
module; or any other ComNet module having the following outline
dimensions:
3.73 × 3.937 × 1.062 in (9.47 × 9.99 × 2.7 cm), or 2.508 × 3.30
× 1.062 in (6.37 × 8.38 × 2.7 cm). The outline dimensions of
ComFit modules are 6.1 × 5.3 × 1.1 in (15.49 × 13.46 × 2.79 cm).
DINBKT2: DIN-Rail Adaptor Plate, with mounting hardware kit. This plate is
to be selected when DIN-Rail mounting any ComNet module with
the following outline dimensions: 3.73 × 3.937 × 1.062 in (9.47 ×
9.99 × 2.7 cm).
The ComNet module is simply affixed onto the appropriate DIN-Rail adaptor
plate with the mounting hardware provided with each plate. The aluminum
plate is fabricated with several sets of no. 6-32 PEM nut fasteners that allow
the module to be mounted on the plate in either the vertical or horizontal
axis, providing considerable flexibility in module mounting and installation.
The complete assembly is then clipped directly onto any standard 35mm
DIN-Rail. Two (2) no. 6-32 × 3/8" machine screws are included as part of
this kit for mounting one module onto the adaptor plate.
For those applications where it is desired to mount a DIN-Rail mountable
Ethernet switch or other equipment within a standard 19-inch equipment
cabinet, ComNet model DINBKT3 adaptor plate kit is available. This ruggedly
built unit, fabricated of 16-gauge powder-coated steel, occupies only 6.75
in (17.1 cm) of rack height, and provides 17.5 in (44.5 cm) of usable module
mounting space on its integral 35mm DIN-Rail channel. A maximum of 50 lbs
(22.7 kg) of DIN-Rail mountable equipment can be supported.
Features
- Allows ComNet products to be adapted to DIN-Rail
installation
- DINBKT3 allows DIN-Rail mount products to be mounted
within any standard 19-inch electronics rack
DINBKT1 / DINBKT2 / DINBKT3
Applications
- Industrial control/factory automation, SCADA, and
HVAC equipment cabinets
- Intelligent Transportation Systems (ITS) controller
field cabinets