Data Sheet

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
FEATURES
› 7 10/100BASE-T(X) Ports
3 Gigabit combo ports
› Designed to meet full compliance
with the environmental requirements
(ambient operating temperature,
mechanical shock, vibration, humidity
with condensation, high-line/low-
line voltage conditions and transient
voltage protection) of NEMA TS-1/
TS-2 and the Caltrans Specification for
Traffic Signal Control Equipment.
› Operating Temperature:
-40˚ C to +75˚ C. Functional to +85˚ C.
› Compatible and fully functional when
used in a Moxa® Turbo ring topology
› SNMP v1/v2c/v3, RMON & IEEE
802.1Q VLAN for secure network
management
› Redundant DC inputs for uninterrupted
operation in the event of a loss of power
› HTTPS/SSH protocol for enhanced
network security
› DDM (Digital Diagnostic Monitoring)
remotely ascertains the status of
the operating voltage, current, and
operating temperature of the SFP
modules
› RMON for traffic monitoring
› Supports LLDP (Link Layer Discovery
Protocol)
› Multiple Notifications for warning of
unexpected events, including relay
fault alarm
› Port lock to prevent access from
unauthorized MAC address
› Windows utility, eConsole, supports
centralized management, and is web-
based configurable, or by Telnet and
console (CLI) ports
› Rigid aluminum housing design
provides for DIN-Rail or wall mounting
› Lifetime Warranty
APPLICATIONS
› ITS Traffic Signalization & Surveillance/
Incident Detection Networks
› Industrial and Factory Automation
› Integrated IP-Video and Data
Transmission Networks
SOFTWARE FEATURES
› STP/RSTP/MSTP (IEEE 802.1D/w/s)
› C-Ring Redundant Ring: Recovery time
<10ms, with over 250 switches within
the ring
› TOS/Diffserv Supported
› Quality of Service (802.1p) for Real-
Time Traffic
› VLAN (802.1Q) with VLAN Tagging
and GVRP Supported
› IGMP v2/v3 Snooping for Multicast
Filtering
› IP-Based Bandwidth Management
› SNTP for synchronizing of clocks over
network
› PTP Client (Precision Time Protocol)
clock synchronization
› Port Configuration, Status, Statistics,
Monitoring & Security
› DHCP Server / Client support
› SFP DDM Monitoring support
The ComNet CNGE3FE7MS3 Managed Ethernet Switch provides robust transmission
of seven (7) 10/100BASE-T(X) and three (3) 10/100/1000T(X) or 100/1000FX combo
ports, of gigabit Ethernet data. It is available for use with either conventional CAT-5e
copper or optical transmission media. The 7 electrical ports support the 10/100Mbps
Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features
are provided for simplicity and ease of installation. Three ports are 10/100/1000
configurable for copper or fiber media for use with multimode or single mode optical
fiber, selected by optional SFP* modules. These network managed layer 2 switches
are optically (100/1000BASE-FX) and electrically compatible with any IEEE 802.3
compliant Ethernet devices. The CNGE3FE7MS3 incorporates LED indicators for
monitoring the operating status of the managed switch and network. These units are
DIN-rail or wall mountable.
CNGE3FE7MS3
Environmentally Hardened Managed Ethernet Switch with
(7) 10/100TX + (3) configurable 10/100/1000TX / 100/1000FX Ports
73FLEXIBILITY
INCLUDEDDIN RAIL -40˚ TO
+
75˚ C
* Small Form-Factor Pluggable Module. Sold separately.