Data Sheet

ManualsBrandsComnet ManualsElectronics100Mbps Media Converter w/2 Contact Closures

FEATURES

› 10/100 Mbps Ethernet

• 10/100 BASE-T/TX electrical port

• 100 BASE-FX optical port

› Two Bi-Directional Contacts

› Electrical port supports Auto-Negotiation for 10 Mbps or 100

Mbps, full duplex or half duplex data.

› Optical port supports 100 Mbps full duplex data

› Automatic MDI/MDI-X crossover

› Distances up to 80 km with optional SFPs for fiber type,

distance and connector (ordered separately)

› Designed to meet full compliance with the environmental

requirements (ambient operating temperature, mechanical

shock, vibration, humidity with condensation, high-line/low-

line voltage conditions and transient voltage protection) of

NEMA TS-1/TS-2 and the Caltrans Specification for Traffic

Signal Control Equipment.

› Voltage transient protection on all power and signal input/

output lines provides unconditional protection

from power surges and other voltage transient events.

› No in-field optical adjustments required

› LED Indicators

› IEEE 802.3 compliant

› Lifetime Warranty

APPLICATIONS

› Access Control Systems

› Building and Environmental Control Systems

› Tamper Switch

› 10/100 Mbps Ethernet Media Converter

› High Speed Computer Links

› Dry contacts

The ComNet

™

CNFE2MC2C[/M] Ethernet media converter is designed to transmit and

receive 10/100 Mbps data and two bi-directional contact closures over multimode or

single mode optical fiber using sold-separately SFP* modules to select distance and

connector type. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps

Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps

Ethernet rate. These media converters are environmentally hardened to operate in

extreme temperatures. The CNFE2MC2C/M small package size is ideal for locations

where space is at a premium. Packaged in the exclusive ComNet ComFit housing, the full

size CNFE2MC2C may be rack-mounted, or may be DIN-rail mounted by the addition of

ComNet model DINBKT1 adaptor plate.

CNFE2MC2C[/M]

10/100Mbps Ethernet Electrical to Optical

Media Converter with Contact Closures

* SFP = Small Form-Factor Pluggable Module

HARDENEDINCLUDED CONVERTER

LIFETIME WARRANTY WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427

Summary of content (2 pages)

PAGE 1
0/100Mbps Ethernet Electrical to Optical Media Converter with Contact Closures CNFE2MC2C[/M] INCLUDED HARDENED 2 CONVERTER The ComNet™ CNFE2MC2C[/M] Ethernet media converter is designed to transmit and receive 10/100 Mbps data and two bi-directional contact closures over multimode or single mode optical fiber using sold-separately SFP* modules to select distance and connector type. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments.
PAGE 2
10/100Mbps Ethernet Electrical to Optical Media Converter with Contact Closures CNFE2MC2C[/M] SPECIFICATIONS Data Power Data Interface: Ethernet Data Rate: 10/100 Mbps IEEE 802.