Data Sheet

Features
- 10/100 Mbps Ethernet
• 10/100 BASE-T/TX electrical port
• 100 BASE-FX optical port
- Electrical port supports Auto-Negotiation for 10 Mbps
or 100 Mbps, full duplex or half duplex data.
- Optical port supports 100 Mbps full duplex data
- Automatic MDI/MDI-X
- Distances up to 45 km (28 miles)
- Designed to meet full compliance with the
environmental requirements (ambient operating
temperature, mechanical shock, vibration, humidity
with condensation, high-line/low-line voltage conditions
and transient voltage protection) of NEMA TS-1/TS-2
and the Caltrans Specification for Traffic Signal Control
Equipment.
- SC and ST optical connectors available
- Voltage transient protection on power input lines
provides unconditional protection from power surges
and other voltage transient events
- No in-field optical adjustments required
- LED Indicators
- IEEE 802.3 compliant
- Lifetime Warranty
WWW.COMNET.NET TECH SUPPORT: 1.888.678.9427
10/100 Mbps Ethernet media converter for Aigis Dome
Description
The ComNet™ series of Ethernet media converters are
designed to transmit and receive 10/100 Mbps data
over one or two multimode or single mode optical
fibers. They are designed to be mounted within an
Aigis dome and provide optical Ethernet connectivity.
The electrical interface will Auto-Negotiate to a
10 Mbps, or 100 Mbps Ethernet rate without any
adjustments. The optical interface operates at a 100
Mbps Ethernet rate. The series is environmentally
hardened to operate in extreme temperatures. An LED
indicator confirms equipment operating status.
CNFE100(X)(M,S)(1A,2)-A
Applications
- 10/100 Mbps Ethernet Media Converter
- Electrical to Optical Media Converter for
Aigis Dome