User Manual 4G Smart phone Model: CTIP401 1
ABOUT This document contains only the instructions necessary for setting up and safe use of your CTIP401 device. Enjoy your CTIP401 and be cautious. WHAT’S IN THE BOX 1. DC+5V Adaptor *1 2. USB Cable*1 3. Earphone *1 4.
CTIP401 AT A GLANCE 1. Earphone slot 2. USB Port (for charging and connecting to computer) 3. Speaker 4. Front Camera 5. Receiver 6. Proximity sensor 7. Volume+/- Control Key 8. Power On/Off 9. Rear Camera 10.
11. Fingerprint Key Sensor 12. Memu 13. Home 14. Back CHARGING THE BATTERY Connect one end of the USB cable (supplied) to the USB port of the DC+5V adaptor (supplied). Connect the other end of the USB cable to the USB port of the device. Plug the DC+5V adaptor into the wall socket (AC 180-240V). Charging will start. You can also charge the device via a USB cable connected to a computer. The device should only be connected via a USB 2.0 connector.
INSTALLING A SIM /SD CARD 1. Turn off the mobile phone and unplug the external power supply. 2. Inserting needle into the round hole of SIM slot, press the needle gently and the SIM slot is popped out as shown in the picture. 3. Put SIM card or TF card on the SIM slot, push back the SIM slot. 4. If you need to take out the SIM card or TF card, use the needle to insert in the hole of the cassette as picture, press the needle gently, then the SIM card or TF card will be popped out.
To unlock, Swipe up the icon to the top. To lock the screen, short press the Power On/Off key. To turn off the mobile phone, long press Power On/Off button, then tap Power Off. MAIN ICONS ICON DESCRIPTION Indicates the strength of the network signals. Shows missed calls. A new message has been received. Indicates that an application is being downloaded. The alarm clock has been set and activated. A call is in progress. A music item is playing. Shows battery level. Access is blocked.
New call: Press to add a new attendee in a call. End a call: Press to end the ongoing call. CONNECTIONS DATA In the main menu, tap Settings then Network & Internet. Tap SIM cards and select a SIM card. Tap Cellular data to select a SIM for data connectivity. To turn off data connection, tap near SIM slot 1 or 2. Note: data connection requires SIM card presence in the device. WI-FI In the main menu, tap Settings then Network & Internet. Tap Wi-Fi off to turn on and search a network.
Tap Bluetooth On again to turn off your device. USB COMPUTER CONNECTION Turn on the device; use the USB cable (supplied) to connect the USB Port of the mobile phone to the USB port of a computer. The icon appears automatically on the top of the screen of the mobile phone. Pull down from the top screen and touch can select the Connection type by touching “ to go into the USB connection screen. You ” to enable it.
Processor: Octa core 1.5Ghz processor Display: 5.7 inch Resolution: HD+ IPS 720x1440 pixel Storage: 32 GB Ram: 3 GB Camera: Front 2.0 MP; Rear 5.0 MP/0.3MP Battery: 3000mAh Size: 155.1x7.3x8.6mm Expandable Memory: Up to 32 GB Sensor: G-sensor Fingerprint sensor: Yes Sim Slots: Dual SIM, GSM + GSM Sim Size: SIM1: Nano Wi-Fi: Wi-Fi Bluetooth: Bluetooth GPS: Yes with A-GPS USB Connectivity: Type-C 2.0 Sound Port Type-C Power Adaptor AC In 100-240V.
Do not expose the device to strong magnetic fields. Power off the device and disconnect the charging cable before cleaning the device. Do not use any chemical cleaning agents to clean the device. Use a damp and anti-static soft cloth for cleaning. Do not attempt to open or repair the device. Only authorized personnel are allowed to repair the device. Only use accessories approved for the device.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired peration Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
