SenseTagTM User Manual QuantifiedAg.com support@QuantifiedAg.
Support Thank you for selecting Quantified Ag® products. For product updates and support, visit http://support.quantifiedag.com. Phone : (844) 414-2691. Trademarks Quantified Ag® and the Quantified Ag® logo are trademarks and/or registered trademarks of Pixobot®, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © Pixobot®, Inc. All rights reserved.
Safety and Regulatory Information Read all of the instructions listed here and/or in the user manual before you operate this device. Give particular attention to all safety precautions. Retain the instructions for future reference. This device must be installed and used in strict accordance with the manufacturer’s instructions, as described in the user documentation that is included with the device. Comply with all warning and caution statements in the instructions.
FCC RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and a person’s body (including hands, wrists, feet and ankles) must be at least 20 cm (8 inches). This transmitter must not be co-located, or operating in conjunction with, any other antenna or transmitter.
RESTRICTIONS ON THE USE OF WIRELESS DEVICES In some situations or environments, the use of wireless devices may be restricted by the proprietor of the building or responsible representatives of the organization. For example, using wireless equipment in any environment where the risk of interference with other devices or services is perceived or identified as harmful.
Table of Contents OVERVIEW .................................................................................................................................................. 7 OPERATING SPECIFICATIONS .................................................................................................................................. 7 ACTIVATION...............................................................................................................................................................
OVERVIEW Operating Specifications Frequency 902 - 928 MHz Dimensions 3.765” x 1.271” x 0.925” (95.6 mm x 32.3 mm x 23.5 mm) Weight 0.098 lb (44.45 grams) Expected Battery Life > 6 months Operating Temperature -40°C to +85°C Relative Humidity 20% to 90% non-condensing Figure 1 SenseTag Full Assembly Note: The strap and bushing are inserted into the plastic during the manufacturing process. Figure 1 SenseTag Full Assembly is how the device is shipped to the field.
Figure 2 PCB Assembly Bottom Side Figure 3 PCB Assembly Top Side 8
Activation Button/LED behavior: When tag is in SEARCH MODE: Button Press Description LED Behavior Quick Press (<3 seconds) Do Nothing N/A Long Press (>3 seconds) Activate the tag 10 blinks @2Hz When tag is ACTIVATED: Button Press Description LED Behavior Quick Press (<3 seconds) Status - Show tag is activated 10 blinks @2Hz Long Press (>3 seconds) Tag will enter search mode 5 seconds solid on The tags will come from the factory (post-production) in Search Mode.
Tagging 1. QuantifiedAg SenseTag uses a standard ear tag pin and a modified hand tool used to apply the pin to the tag. Figure 4 Hand Tagger and Standard Pin 2. The SenseTag is attached to the LEFT ear of the cow, with the strap wrapping from inside the ear out/up to the top of the ear.
Figure 6 SenseTag During FCC Testing 3. Figure 6 SenseTag During FCC Testing show how the tag would be installed into the ear of the animal.