User's Guide

Cellular band Multi Carrier Power Booster Amplifier
CCI Model Number MCPB-850-200-XXX
USER’S GUIDE
Product Description:
The MCPB-850-200 is a high linearity multi carrier power amplifier capable of
delivering 200 Watts of power. It can operate with multiple numbers of carriers and
various types of modulated signals. It supports GSM, EDGE, UMTS, CDMA, TDMA
and Analog. The amplifier utilizes adaptive feed forward technology to improve and
maintain linearity
Operation Description:
The MCPB-850-200 is designed to provide a nominal output power level of 200
Watts (53 dBm), regardless of the number of carriers or modulation types. Although
the gain of the MCPB-850-200 is fixed, the output can be adjusted by setting the
input power level.
Operation and Installation Instructions:
The following instructions should be followed when installing the unit in service:
• Apply a 26-31VDC input voltage to the DC Input connector of the Multi Carrier
Power Booster
• Insure that the DC Source is capable of delivering up to 70 Amps at 28VDC.
• The Multi Carrier Amplifier Booster will provide approximately 15 dB or less of
power gain.
• Apply a signal with a composite power of no more than +38dBm to the RF
Input port of the MCPB.
• Check the RF output to insure the proper output power is present.
{Approximately 200 Watts (53dBm)}.
COMMUNICATIO
N
COMPONENTS IN
C
Extending Wireless Coverage
89 Leuning Street Phone: [phone]
2
nd
Floor Fax: [phone]
South Hackensack, NJ 07606 www.cciproducts.com