Item #1006 316 038 Model #XD2616-L USE AND CARE GUIDE FULL MOTION TV WALL MOUNT FOR FLAT PANEL TVS (FITS VESA 200/300/400/600) Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM For additional support, call the manufacturer at 1-800-747-6558.
Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pre-Installation ENSURING THIS IS THE CORRECT WALL MOUNT FOR YOU IMPORTANT: Review this section carefully before you proceed with this installation to ensure that this is the correct TV Wall Mount for you. This TV Wall Mount is the correct wall mount for you if: □ Your TV VESA size is equal to or no greater than 600 mm x 400 mm (24 in. x 16 in.). □ Your TV (including any accessories) weighs less than 132 lbs (60 kg).
Pre-Installation (continued) ENSURING THE WALL STABILITY Carefully inspect the wall area you have selected. Examine the wall surface before you begin drilling. WARNING: Do not drill near electrical wiring and water pipes. CAUTION: Wood studs must be no smaller than 2 x 4 in. in size. Ensure the surface covering does not exceed 5/8 in. CAUTION: Concrete walls must have a minimum thickness of 5.5 in. Ensure the surface covering does not exceed 3/8 in.
Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware is not shown to actual size. NOTE: The hardware included is suitable for mounting to walls made of brick, solid concrete, or wood studs covered with drywall. If your www.HomeDepot.com. For additional support, you can also call the manufacturer at 1-800-747-6558.
Pre-Installation (continued) PACKAGE CONTENTS MOUNTING TEMPLATE C B A D E Part Description F Quantity A Wall plate unit 1 B TV bracket 2 C Bubble level 1 D E F Mounting template HDMI Velcro ties 1 1 4 6
Installation 1 2 Identifying the bolt diameter to use Identifying the bolt length to use □ Insert a straw or toothpick (not included) into one of the mounting holes on the back of your TV. If your TV is curved or recessed, place the proper sized spacer (KK, LL, MM, or NN) on top of To ensure proper mounting of the brackets to your TV, this mounting system includes several sizes of bolts (EE – JJ), washers (OO and PP), and spacers (KK – NN) that can be used in various combinations.
Installation (continued) 4 Marking the mounting holes C Use the mounting template (D) to mark the mounting hole locations for attaching the wall plate unit (A) to the wall. TE PLA EM GT TIN UN MO D Use the bubble level (C) to ensure the mount will be level before you drill holes. 5 6 Drilling the mounting holes in a concrete/brick wall Drilling the mounting holes in a wood stud CAUTION: Avoid drilling near electrical wiring and water pipes.
Installation (continued) 7 Attaching the mounting arm to the wall C A Align the wall plate unit holes with the pre-drilled holes in the wall. AA Use the bubble level (C) to ensure the wall plate is level before securing to the wall. Attach the wall plate unit (A) to the wall using lag bolts with washers (AA). Tighten the bolts (AA) securely using a Phillips screwdriver and a socket tool (not included).
Installation (continued) 9 Adjusting the angle of the TV Adjust the angle of the TV by loosening the screw (1) on various angle adjustments. Securely tighten the screw (1) 1 ±45° +5° ±4° 10 Manage TV cables orderly through the velcro ties.
Troubleshooting Problem Solution The cables are blocked by the mount or brackets. Solution 1 Add spacers between the bracket and the TV back. Plug in the cable first and then hang the TV. Spacer Solution 2 If VESA is less than mount's max line, please move bracket away from the cables. Solution 3 If the above solutions do not help, please contact 1-800-747-6558 with information about your TV's model, size, and weight. Problem The TV keeps tilting.
Troubleshooting (continued) Problem The TV is not level or is out of balance. Solution Solution 1 Check if the wall plate is level using the provided bubble level. If the wall plate is not level, adjust it to level. Solution 2 Check if the TV plate is level. If the TV plate is not level, adjust it to level. Use a hex wrench (DD) to loosen the two leveling bolts in the rear TV plate, hold the TV to adjust to level, and then fasten the leveling bolts tightly.
Troubleshooting (continued) Problem Solution The arm moves stiffly. Apply lubricant to the arm's joint. Problem Solution The bolt is difficult to screw into a wood stud. If the bolt is damaged, please contact customer service for a replacement bolt and follow the installation instructions. 1. Pre-drill the pilot holes to the required length. 2. Use an open wrench or socket wrench (not included), rather than power tool, which could damage the bolt.
Questions, problems, missing parts? Before returning to the store, call Commercial Electric Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-877-527-0313 HOMEDEPOT.COM For additional support, call the manufacturer at 1-800-747-6558. Retain this manual for future use.
