******** MB-52472 Tilting Wall Mount for Flat Panel TVs 50/75/100/200)
4-7 Before you begin, carefully read and understand the instructions in this manual. Please follow the instructions in the order presented in this manual and observe all warnings and cautions. 30 lbs. (13.6kgs). 10.43"(265mm) min0.83"~max1.77" (min21~max45mm) 6.69"(170mm) min1.97"~max8.66" (min50~max220mm) This mount has been tested to support a television with diagonal screen sizes between 13in. and 47in. (33 cm & 1.19 m) and a weight up to 30lbs. (13.6kgs).
Pre-Installation masonry Lag bolt washer Lag washer (sizes M4x14, M5x14, M6x14, M8x15, M8x50) Mounting plate 1 10 20 2 30 40 50 3 60 70 4in 80 90 100mm
To ensure proper mounting of the brackets to your TV, this mounting system includes several sizes (M4, M5, M6, and M8) of screws (DD) and washers (EE) that can be used in various combinations. Combinations are determined by the back style of the TV (flat, curved, or recessed) and the diameter and depth of those holes. Select the screw diameter to use by inserting the various sized screws (M4, M5, M6, and M8) into the mounting holes in the back of your TV.
Installation (continued) 3 Attaching the mounting brackets to the TV Attach the mounting brackets (B) to the back of the TV using the screws (DD) and washers (EE) you identified in step 1. Note: If you use a Samsung TV with deeper VESA holes, please use M8x50 screws and Samsung spacers. ( These spacers are included with Samsung TV. ) CAUTION: Tighten the screws so the brackets are firmly attached. DO NOT OVERTIGHTEN. This may damage your TV.
Installation (continued) CAUTION: Ensure the wall you select is a weight-bearing wall. Failure to observe this precaution can result in serious physical injury and/or property damage. Consult a professional installer or contact customer service if you have any questions.
Installation (continued) Installing the mounting plate (concrete/masonry wall) 6 Mounting the TV to the mounting plate Loosen the two screws on the bottom of the mounting brackets (B) as shown. Holding the TV with the top of the screen tilted toward the wall, slide the upper notches of the mounting brackets (B) over the upper lip of the mounting plate (A). Tighten the two screws on the bottom of the mounting brackets (B) as shown to secure the TV. HEAVY! You will need assistance with this step.