Instructions / Assembly

ManualsBrandsCommercial Electric ManualsAccessoriesFlat Panel TV Cable Organizer Kit

□

Installation

□

PREPARING THE WALL FOR INSTALLATION

CUT DRYWALL FOR TOP AND BOTTOM PLATES

Installation Guide

Flat Panel TV Cable Organizer Kit

Item #1001863164

Model #5623-WH

PACKAGE CONTENTS

A - Pre-Assembled Top Plate w/ 15 A/125 V Duplex Receptacle,

8 ft 14/2 With Ground Pre-Stripped Electrical Building Wire

and Attached Mounting Wings

B - Bottom Plate With Easy Push-in Connectors and Attached

Mounting Wings

C - 6 ft. Extension Cord w/ 360˚ Rotating Flat Head

TOOLS NEEDED

Drywall Saw

Tape Measure

Phillips Head Screwdriver

Pencil

Level

Stud Finder

D - Electrical Box

TEMPLATE

CAUTION

Intended for use on 15 amp branch circuits

Not intended for use in drywall with re

walls

On outside exterior walls with insulation

push away insulation to allow proper

mounting

Determine the top and bottom plate location*.

Use the stud nder to center between the wall framing

studs.

□

Be sure to frame your plate both vertically and

horizontally.

□

For video information visit homedepot.com and search SKU 1001863164 or model number 5623-WH

Tape

*This kit is designed for standard 2x4 framed walls.

Both top and bottom plates are installed between the same two

studs.

Up to 7’

Up to 6’

Outlet

Height or

18”

TIP: Loop a piece of tape with the sticky side outward to form a circle and

apply it to the back of the template to secure it to the wall.

Using the template supplied, trace the opening for both the top and

bottom plate on the wall. Remember, the plates are designed to be

mounted centered between the studs.

With your template secured to the wall with the tape, using a drywall saw,

cut a hole in the drywall the size of each template

Scan Me

RoHS Compliant

This product is patent protected by

U.S. Patent number: 7390964B2, 7399920B2,

D553475S, D554475S and D568719S

ETL LISTED

CONFORMS TO

UL STD. 498

CERTIFIED TO

AN/CSA STD. C22.2#42.1:200-1

3026001

Rev. 12/23/2019

PREPARING THE WALL FOR INSTALLATION

Summary of content (4 pages)

PAGE 1
Item #1001863164 Model #5623-WH Installation Guide Flat Panel TV Cable Organizer Kit PACKAGE CONTENTS CAUTION TOOLS NEEDED A - Pre-Assembled Top Plate w/ 15 A/125 V Duplex Receptacle, 8 ft 14/2 With Ground Pre-Stripped Electrical Building Wire and Attached Mounting Wings B - Bottom Plate With Easy Push-in Connectors and Attached Mounting Wings Drywall Saw Tape Measure Phillips Head Screwdriver Pencil Level C - 6 ft.
PAGE 2
Item #1001863164 Model #5623-WH Installation Guide Flat Panel TV Cable Organizer Kit Installation 4 □ 5 RUN CABLES THROUGH WALL Run your low voltage cables and the included 14/2 with ground UL approved electrical building wire from the top opening in the wall through the bottom opening in the wall. TIP: Straighten out the cable from the top plate BEFORE running the cable through the wall. You will need to fish the cables from the top opening to the bottom opening.
PAGE 3
Item #1001863164 Model #5623-WH Installation Guide Flat Panel TV Cable Organizer Kit Installation 7 8 INSTALLING THE BOTTOM PLATE □ Pull your low voltage cables through the cable opening in the HANG TV AND ENJOY □ Hang your flat panel TV on the mounting bracket (not included) and bottom plate (B). Before installing the bottom recessed plate with inlet into the bottom wall opening, make sure to pull your low voltage cables through the low voltage cable opening in the back of the plate.
PAGE 4
Item #1001863164 Model #5623-WH Templates 4- 9/16” TOP PLATE TEMPLATE ACTUAL SIZE  4 3/4” BOTTOM PLATE TEMPLATE ACTUAL SIZE  ETL LISTED CONFORMS TO UL STD. 498 CERTIFIED TO 3026001 CAN/CSA STD. C22.2#42.1:200-1 RoHS Compliant This product is patent protected by U.S. Patent number: 7390964B2, 7399920B2, D553475S, D554475S and D568719S Rev.