Class B device NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
■ FEATURES C amera connec tion Power connec tion(+) Ground C hannel switch C hannel switch Monitor terminal Power terminal(INPUT)
■ Accessories Please check if following contents are included in a pac kage 1) Transmitter 3) Manual 2) Rec eiver 4) Power cable for Receiver ■ Operation You should install the transmitter and rec eiver in putting opposite as shown below and c onnec t power and other c ables. .
1) The distanc e between the receiver and transmitter should be within 1~ 5 meters, when you install. 2) The devic e can be used by altering transmitter- rec eiver channels through optional c hannel selec tion switc h. NOTE : 1) The device may be affec ted by outside signals depending on the surrounding conditions. 2) The devic e is set to C H1 default.