User Manual COMMAX LOBBY PHONE DRC-703S • • Thank Thank you you for for purchasing purchasing COMMAX COMMAXproducts. products. • • Please Please carefully carefully read read this this User’s User’sGuide Guide(in (inparticular, particular,precautions precautionsfor forsafety) safety)before beforeusing usingaaproduct productand andfollow follow instructions instructions to to use use aa product product exactly. exactly.
Greetings ● Thank you for choosing COMMAX. ● Please read this manual carefully before you use the product. Table of contents Greetings ..................................................................................................................1 Contents table ...........................................................................................................1 1. Warnings and caution ...........................................................................................2 2. Part names....
1. Warnings and caution Please follow the things described below in order to prevent any danger or property damage. Warning Prohibition. It may cause a serious damage or injury if violated. No disassembly No touch Caution Must follow strictly. Shows plugging out the power cord without an exception It may cause a minor damage or injury if violated. Shows the warning and caution for an electric shock. Shows the warning and caution for a fire.
Cleaning & Use Warning Please don’t disassemble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed. ·It may cause an electric shock or fire. If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center. ·It may cause an electric shock or fire. Please don’t insert any metallic or burnable materials into the ventilation hole. ·It may cause an electric shock or fire.
2.
3. Main Screen Setting ● Main ● Screen Status Icon Description Icon Description Lan Connection Registered server status Display out post lobby phone Not Registered server status Display building lobby phone Local Server connection status Display Video Codec(MPEG-4) Display Video Codec(H.
4. Security Call ① Push (Security Guard Post) Button ② Push (Call) button ③ Call sound is ringing and call Security Guard Post. ④ Call Security Guard Post when guard answer call. (Time: 1 min.) ⑤ Press "X" button when terminate call. ⑥ Security Guard push 'Open door’ button, 'Door is open” voice comment then door is open. ⑦ If line is busy, call it later. Picture1.
5. Call house ● Communication call between residence When building number is set in advance : When building No. already registered to Call Prefix Picture2. Screen for registering house No. ① Input unit No. to key board. Ex) Unit 101 input ‘101’ ② Push (call) button. ③ Ringing call sound and call unit. ④ When tenants answer call, calling is on. (Max. time: 1 min) ⑤ Press "X" button when terminate call.
When building number is NOT set in advance : When building number hasn't been registered Call Prefix yet. Picture3. Building house No. register screen ① Input Building No. to key board. Ex) Building 101 input ‘101’ ② Input unit No. to key board. Ex) Unit 101 input ‘101’ ③ Push (call) button. ④ Ringing call sound and call unit. ⑤ When tenants answer call, calling is on. (Max. time: 1 min) ⑥ Press "X" button when terminate call.
6. Access authorization ● Opening the entrance with RF card. ① Tag RF card to 'Card tagging window’. ② The common entrance get be opened with a vocal message, "Door opens” when the access is successful. ③ The entrance does not be opened when the access fails with sound. Picture4. Tag RF-Card ● Access by PIN No. Building Number designated case : Building Number designated in Call Prefix ① Input unit No. through key board. ② Push (Key) button. ③ Input designated house PIN No. ④ Push (call) button.
Picture5. Input password (PIN) ● Use password for accessing when system is OFF-Line (No connection with Local server) ① Push (Key) button. ② Input PIN number. ③ Push (call) button. Please, should delete OFF-LINE PIN number when On-Line mode is activated ● Use password for accessing when system is ON-Line (When connected with Local server) ① Push (Key) button. ② Input Administration Pin number ③ Push 10 (call) button.
7. Set up ● Set up button. 1 2 1. Push 3 2. Input PIN number. 4 5 3. Push 6 (call) button. 7 8 We 9 recommend user change initial password (0000) then use products for security. Initialize password : 1 2+“0000” 3 + 1+ 2+ 3 + + 1 2 3 0 button map 4 5 64 5 6 4 5 6 7 8 97 8 9 7 8 9 0 0 0 홈버튼 홈버튼 외출/방범 버튼/LED 외출/방범 버튼/LED 홈버튼 외출/방범 버튼/LED ● “●”is DOT (.) for IP address typing.
2 : Management+ 0 : Server address (Input Local server address) 1 : Update address (Input update server address) 2 : System ID (Input DRC-700S serial No.) 3 : Call Prefix (Set building) If there is no building information in set up, automatically pop up for building information when call house. 4 : Call Line+ 0 : Min Call Line (Input call Min. line) 1 : Max Call Line (Input call Max. line) Attention : If Min Call Line is bigger than Max Call Line, you can’t call it.
1 : Brightness (Control Video Brightness ) 2 : Contrast (Control Video Contrast) 3 : Saturation (Control Video Saturation) 4 : Hue (Control Video Hue) 5 : Initialization (Initialize Video) Initialize all setting value from Video menu. 4 : Extra Config+ 0 : Language (Select language) 1 : Skin Theme 0 : Auto Automatically change Skin Theme once a day or after booting. 1 : Flip Clock Set up Skin Theme to Flip Clock Type. 2 : Red Clock Set up Skin Theme to Red Clock Typ.
Initial Off-Line password is “123456”. 6 : Reboot: (System rebooting) 7 : System Reset (Initialize all setting and back to factory setting) Do not initialize IP after changing IP address. 5 : Database+ 0 : Password Down. (Download house password) 1 : RF-Card Down. (Download RF-Card Data) 2 : Password Del. (Delete house password) 3 : RF-Card Del.
8. Wiring Diagram Pay attention to check polarity when install lobby panel.
FCC Statement 15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 15.21: Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance.
Memo 17
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com Printed In Korea / 2014.10.