User's Manual

CDL-200P
USER MANUAL
* No unauthorized person should disassemble, repair or modify the device.
* This product is for indoor use.
* Please read the User Manual before useing product.
* Do not press the buttons with any sharp objects
* Change your access code from time to time for your safety.
* Do not impact the device.
* Be careful of leakage or rupture that may occur when inserting a battery in wrong direction.
* Prevent the device coming in contact with water
* when replacing a battery, change all the batteries with new alkaline batteries.
* Please wipe the product with soft, dry towels.
* Please keep product warranty card for after service.
* Do not use this product for other purposes than digital door lock function.
Products specifications and components
Outdoor Names and Functions
*The components of the product may change depending
on the installation environment.
This lock does not come with a physical key and
in the rare event of failure, may require the destruction
of the lock for removal and replacement.
Registration authentication setting
1. Enter password
2. Press [#] button twice,
press [8] button.
Registration
authentication
Mode on/off
1. If registration authentication mode is activated, first authentication by
existing password should be done for the next step.
* Registration authentication is not activated if factory setting.
* To deactivate registration authentication, repeat the same procedure
for activation
Reference
Open the door in outside
Method 1
Open the door by password
1. Enter password 2. Press [*]button
Touch the number
plate and enter your
password
Press the [*] button,
you will hear a
confirmaion tone and
then the door will open
COMMAX Co., Ltd.
Thank you for purchasing COMMAX products.
Please red this manual before use.
Commax is not responsible for any safety issues
due to abnormal operation of
the product
Safety Warning
These warning are to ensure the secure operation of the lock.
Carefully read the instructions below
How to register and change password
Be sure to register your password with the door open.
3. Enter new password
After entering the new password(4~12 digits),
press * button and the confirmation tone sounds
and registration is completed. Press the * button
once more to end registration.
1. If you register a new password, the existing password will be automatically
deleted.
2. Do not use consecutive numbers when registering your password.
Cautions
1. Press
[registration] button
2. Press [1]button in the number
plate of outdoor side
Beep
Open the battery cover and
press [registration]button
1. When adding the password, repeat the above item 3 before the key pad
turns off.
2. Up to 4 password can be registered
Reference
Indoor Names and Functions
9V emergency battery
(Separate purchase)
No Name Specifications
1 Battery cover
This cover protects the batteries and the
registration button.
2 Indoor handle Used to open or close the door indoors.
3 Registration button(R) Used to register or change password or smart key
4 Mortise
Closes or locks the door
5
Dead bolt
(Square locking type)
It locks the door
6 Latch bolt Stabilizes door on closing
7 Alkalina AA battery Power source thst operates the door lock
8
Double lock button
(Close button)
Cna be used to lock the door so that it can not
be opened from the outside.
Locking door from inside and outside
Indoor Outdoor
Press the [double lock] button
on the inside
Touch the keypad
Internal double lock setting
Setting
How to release internally
It is a function that can not open a door with a password or a smart
key outside the door.
1. While the door is locked, press and hold the [double lock]
button for 3 seconds
If you press and hold the [DUAL LOCK] button for
3 seconds, the setting is completed with sound.
2. Press the [double lock] button
inside to dismiss double lock setting
1. Push the indoors handle
Deactivation from outdoor unit
1. Enter Password
2. Press [#], [9] button
Press [#] then press [9],
internal double lock is off
with beep sound
Multi-level volume control / Selectable silence function
Light-up buttons for visibility
High-voltage protection/Fire protection/Anti-hack system
Remote control using BLE, ZIGBEE
Durable Door lock
Metal body
Additional number entry for secure password
Multiple passwords can be registered
Emergency power function (9V battery)
Simple registration
Outbody
Inbody
Mortise & Stricker Screw
Installation
instruction
User manual
8 Batteries
Construction diagram
4 Smart key
Outdoor shaft
Sort Specifications
Password 4-12 digits (Up to 4 can be registered)
Smart key It can register within 30
Rated voltage DC 6V LR6 1.5V AA sized alkaline batteries 4
Emergency power DC 9V Alkaline batteries 8 (Separate purchase)
Type of product
High temperature
sensing
Temperature sensor type
Out body AL,ZN,ABS,PC
In body AL,ZN,ABS,PC
60℃ ± 10℃
Opening method
Fire-proof, Temperature-sensitive form, None-KEY, Primary keylock / F-T-NK-M)
Material
No Name Specifications
1 Number plate Enter the number when registering or changing password.
2 Battery warning light Turns on with an audible alarm at low voltage.
3 Outdoor handle It is Used to open or close doors from outdoors.
4
Emergency power
terminal
In case the battery is completely discharged, you can use 9V
battery then, the power will be on.
5 Smart key input unit
It is the place where smart keys are recognized to open the
door. You can open the door by registering the smart key or
touching the registered smart key.
1. Press
[registration] button
2. Press [2]button in the number
plate of outdoor side
Beep
Open the battery cover and
press [registration]button
3. Contact smart key to smart key input unit
If you touch the smart key to be registered one by one,
you will hear a confirmation sound every time you touch it.
Registration is completed by clicking the [Registration]
button on the indoor side body.
1. When registering a new smart key, the existing smart key is automatically
deleted.
Reference
Cautions
1. When adding the smart key, please repeat the above item 3 before the
[Number plate lamp] turns off.
2. Up to 30 smart keys can be registered.
How to register smart key
How to delete smart key
2. Press [7]button in the number plate
3. Press [#] button
Press and hold the [#] button for 5 seconds to delete
the registered smart key.
1. Press
[registration] button
Beep
Open the battery cover and
press [registration]button
Open the door with smart key
1. Contact smart key to smart key input unit
Method 2
When the registered [Smart Key] is touched to the
smart key input part, a confirmation tone is heard
and it opens when you open the door.
Touch the number
plate and enter your
password
Touch the number
plate and enter your
password