User Manual Patent Pending Hickory, NC 28601
Thank you for purchasing a LevelMatePRO wireless vehicle leveling system. This product was designed for ease of use and utilizes the best possible components and engineering to achieve accuracy you can count on. I believe you will find it to be an extremely useful and time saving tool. LevelMatePRO is proudly Made in the USA. Important Information about your LevelMatePRO The LevelMatePRO has an on/off switch which controls power from the battery to the system.
Limited Warranty The warranty obligations of LogicBlue Technology (“LogicBlue”) for this product are limited to the terms set forth below. What is Covered This limited warranty covers defects in the materials and workmanship in this product.
As with all electronic devices, they are susceptible to damage by static electricity discharge. Before removing the cover of this product be sure to discharge the static electricity in your body by touching a piece of grounded metal. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference.
IC Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme audio CNR d'Industrie Canada applicable audio appareils radio exempts de licence.
Setup and Install the LevelMatePRO 1) Remove the 4 screws on the top cover. 2) Remove the top cover and set aside. 3) Remove the bags containing the battery and mounting screws from inside and set aside. 4) Remove the battery from the packaging and install it with the plus (+) sign up as in figure 1. Figure 1 5) Reinstall the top cover with the 4 screws you removed in step 1. Be sure to install the arrows on the top cover in the same direction as the arrow printed on the circuit board.
The LevelMatePRO has a security feature that records the unique serial number of the device to your smartphone or tablet so that when you are in close proximity to other vehicles with LevelMatePRO installed, your smartphone or tablet will only recognize your LevelMatePRO. So during this step you need to start the app on each smartphone or tablet so the serial number for your LevelMatePRO will be recorded on your devices.
NOTE: When installing the LevelMatePRO in a towable vehicle, it is recommended that the unit be mounted as close to the front of the vehicle as possible for the best wireless connection from the driver seat of the tow vehicle. 9) Level the vehicle. Level the vehicle using your normal leveling method. Take time during this process to insure that the vehicle is perfectly level as your LevelMatePRO will record this position and use it as a reference each time you level the vehicle.
Label faces rear Label faces Driver’s Side Label faces passenger side Label faces front Label faces Driver’s side
figure 2 figure 3 figure 4
figure 5 figure 6 figure 7 figure 8 14) Measure your vehicle and set level The Settings screen should now be displayed (figure 4 or 5). Measure the length and width of your vehicle as indicated by the front and side view vehicle illustrations on this screen. Enter the length and width measurements in the appropriate locations on this screen. Tap the Save button at the bottom right of this screen to save the vehicle measurements.
NOTE: If you ever uninstall/reinstall your LevelMatePRO in another vehicle or in another location in the same vehicle, you will need to repeat this step after the unit has been reinstalled. 15) Confirm setup is complete After completing the Set Level task above, tap the yellow arrow at the top left of the Settings screen to go back to the Leveling screen (figure 6 or 7).
17) Select the display resolution Using the Advertising and Display Settings screen (figure 8) select the display resolution you would like to use. The default display resolution is .25” but you can select one of the other resolutions if desired. The higher the resolution you select, the more stable the distance measurements will be but accuracy will be sacrificed.
Using the LevelMatePRO 1) Position your vehicle Move your vehicle to the location where you would like to begin leveling. 2) Connect to LevelMatePRO After you have completed installation and configuration of your LevelMatePRO unit and app (at the beginning of this manual), you are ready to begin using the product to level your vehicle. First, insure that the on/off switch is in the ON position.
4) Level your towable vehicle from side-to-side As noted above, when leveling your vehicle from side-to-side you will be using the top section of the Leveling screen. When the vehicle is not in a level position, there will be a yellow arrow pointing upward on one side of the trailer graphic front view. This indicates which side of the vehicle needs to be raised to achieve a level position from side-to-side.
the current position when you are ready to reattach the trailer to the tow vehicle. 6) Level your towable vehicle from front-to-back Once your vehicle is level from side-to-side you are ready to begin leveling from front-to-back. For this step you will be using the bottom section of the Leveling screen. Similar to the side-to-side leveling step, when the vehicle is not in a level position there will be a yellow arrow pointing up or down near the front of the trailer graphic side view as shown in figure 10.
back to give you an indication of the orientation of the display. At each corner of the driveable vehicle display are both a measurement distance and a yellow arrow (only displayed when not in a level position). The measurement distance displayed at each corner is the height required for the wheel that corresponds with that corner of the vehicle. To level the vehicle, simply stack your blocks in front of or behind each wheel to the height indicated for that wheel.
Battery Status Display Front View Level Indicators Directional Arrow figure 9 Temperature Display Distance Measurement Side View figure 10
Hitch Position Save Date figure 11 figure 12
About LogicBlue Technology Formed in 2014 by two former coworkers, LogicBlue Technology began with plans to develop unique, patented products to fill spaces within industries where technical advantages weren't being realized. Being campers ourselves, we saw a need for technical products to simplify RV setup and increase safety and convenience. Overcoming a lot of technical challenges and other hurdles we finally made it to the marketplace with our first product in May 2016, the LevelMatePRO.
