COMM-TEC ProPLAY Audio Digital Audio Player User Manual Version 1.
1. Table Of Content 1. Table Of Content.....................................................................................................2 2. General Notes .........................................................................................................3 3. Product Description..............................................................................................3 3.1 Product Dimensions .........................................................................................3 3.
2. General Notes The COMM-TEC ProPLAY Audio is a remote controllable Digital Audio Player designed to use with simple speakers or a separate amplifier. The data will be played back from a Sandisk Compact Flash Card, which is not in the scope of delivery. Please check the scope of supply, after you have received the shipment.
Top View (in mm) 3.
Description Compact Flash Card Slot USB Power LED Status LED Discrete control / Speaker output Audio output – stereo right Audio output – stereo left 12V DC Power input jack Power on/off 3.3 Type / Use 25x2 pin Hirose CF-II Socket (accepts CF Card types 1 & 2) Mini USB Port On (green) / Off (clear) Enabled (green) / disabled (clear) DB-15 pin female connector RCA jack – Right (red) RCA jack – Left (white) DC power jack. Center pin positive, 2.5mm diam.
4. User Instruction 4.1 Quick Start Instruction Never connect or disconnect parts of the system when the system is powered up as this may cause serious damage. Connection and usage are straightforward. However, care needs to be taken with the following: • • • • Ensuring parts have been correctly connected – both power & signal considerations. Checking that all switches are set correctly. The input signal is compatible. Legal & safety requirements have been met.
• USB Port: A port to upload or download content to or from the CompactFlash Card. The port has to be used while the ProPLAY Audio is switched off or disconnected from the power supply. • Service & Warranty: Warranty is invalidated if the unit is dismantled in any way. The unit is not user serviceable or repairable. CAUTION: Do not attempt to remove any part of the casing or internal parts. 4.
function buttons are pressed. Loop playback is the standard playback setting of the ProPLAY (in simple play and playlist mode) but the track playback sequence can be changed as required using ProPLAY Studio software. 4.4 Operating Instructions There are two operating modes in ProPLAY– “playlist mode” and “simple play mode” . • Playlist mode When operating in playlist mode, both project file (*.prj) and playlist file (*.pll) must be present on the Compact Flash card.
• To disable the repeat mode press REPEAT, PLAY, PREVIOUS TRACK or NEXT TRACK . When the track plays to the end it will playback the next track (and etc.) as normal. NEXT TRACK (Button 5) • The NEXT TRACK function can be activated only when a track is already playing. When NEXT TRACK is pressed the current audio stops playing and jumps directly to the start of the next track. VOLUME DECREASE (Button 6) • Decreases audio output volume setting for both, speaker an line out.
5. Technical Specifications Playable formats: Storage medium: MP3 Audio 32 kbit/s to 320 kbit/s CompactFlash Memory Cards : Type 1 & Type 2 Output Systems: Speakers and/or amplifier Audio Outputs: Signal-to-Noise: Stereo output, connector – RCA jack, 3.2 V p-p max.
