Application Guide

NOTE:
When using a microphone, the transmitter should be at least 20 cm away from the receiver.
"1. How do I use a microphone without a 3.5mm connector on my device?"
You need to purchase the 3.5mm adapter cable that was originally configured by the device. If your
device is an Apple lightning interface, you need Apple's original lightning to 3.5mm adapter cable.
We do not promise the adaptability of other lines.
"2. My device can be connected to the microphone, but the recording still obviously uses
the built-in microphone?"
Use the built-in recording function of the mobile phone to confirm that the product is properly
connected to the mobile phone and the recording is normal.
If you are using the Android system, due to the interception of the system, you need to install a
third-party camera application software for photography. Most camera software can achieve this.
There are also some iOS systems that can only record videos through third-party apps. Secondly,
whether it is Android system or iOS system, it can be used directly.
"3. Can my receiver receive signals from third-party microphones?"
The receiver of our products can only be synchronized with the transmitter of its supporting
products.
"4.What should I do if the microphone's sync transmitter fails to sync? What is this feature?
How to use this function?"
Code-matching function, failed to synchronize the transmitter: Whether the receiver and the
transmitter are point-to-point coded within 30cm of the infrared window, the red light flashes when
the code is matched, and the green light is successfully turned on when the code is matched